LY/T 1062-2025 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
LY/T 1062-2025	RFQ	ASK	3 days	Comprehensive energy consumption for logging production and boardprocessing production	Valid
LY/T 1062-2017	209	Add to Cart	3 days	Comprehensive energy consumption of sawn timber production	Valid
LY/T 1062-2006	319	Add to Cart	3 days	Integration energy consumption in sawn timber production	Obsolete
LY 1062-1992	RFQ	ASK	3 days	(Lumber production and overall energy consumption)	Obsolete

Basic data

Standard ID: LY/T 1062-2025 (LY/T1062-2025)
Description (Translated English): Comprehensive energy consumption for logging production and boardprocessing production
Sector / Industry: Forestry Industry Standard (Recommended)
Date of Issue: 2025-07-21
Date of Implementation: 2025-11-01
Older Standard (superseded by this standard): LY/T 1062-2017, LY/T 1444-2017, LY/T 2549-2015
Issuing agency(ies): National Forestry and Grassland Administration

LY/T 1062-2017: Comprehensive energy consumption of sawn timber production

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Comprehensive energy consumption of sawn timber production ICS 65.020.99 F10 People's Republic of China Forestry Industry Standard Replacing LY/T 1062-2006 Sawn timber production comprehensive energy consumption Released on.2017-10-27 2018-01-01 implementation State Forestry Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. The main changes in this standard compared with LY/T 1062-2006 are as follows. --- Added the term "synthesis energy consumption per unit of sawn timber production unit" (see 3.2); --- Removed the term "various energy sources actually consumed by sawn timber production" (3.2 of.2006 edition); --- Removed the term "unloading" (2006 version 3.2.1.1); --- Removed the term "feeding" (2006. 3.2.1.2); --- Removed the term "sawing" (2006 version 3.2.1.3); --- Removed the term "shop transport" (2006. 3.2.1.4); --- Removed the term "stacking" (2006 version 3.2.1.5); --- Removed the term "loading" (2006 version 3.2.1.6); --- Revised the basic energy consumption grading index of sawn timber unit production (see Chapter 4); --- Revised the formula for calculating the basic energy consumption per unit of sawn timber production (see 5.4); --- Increased temperature correction factor (see 5.5.5); --- Removed the correction factor for the energy consumption index of sawn timber production in areas where heating facilities are installed according to national regulations (2006 version 6.6); --- Removed the correction factor for the energy consumption index of sawn timber production in the area where the cooling device is installed according to the national regulations (6.7 of.2006 edition); --- Removed Appendix B (Appendix B of the.2006 version). This standard is supported by the National Energy Foundation and Management Standardization Technical Committee Forestry Energy Management Sub-Technical Committee (SAC/TC20/SC7) Proposed and managed. This standard was drafted. Heilongjiang Provincial Forest Engineering and Environment Research Institute, Changbai Mountain Forest Industry Group Huangnihe Forestry Co., Ltd., Jilin Red Stone wood integrated processing plant. The main drafters of this standard. Wang Fengshan, Jia Dan, Zhou Tong, Yan Hongli, Wang Xiubo, Han Jingguang, Li Wenge, Wang Qingfeng. The previous versions of the standards replaced by this standard. ---LY/T 1062-1992, LY/T 1062-2006. Sawn timber production comprehensive energy consumption

1 Scope

This standard specifies the terminology and definition of the comprehensive energy consumption of sawn timber production, and stipulates the basic energy consumption grading value of the sawn timber production enterprise. The calculation principles and methods for the comprehensive energy consumption of sawn timber production and the test and measurement requirements for the energy consumption of sawn timber production are presented. This standard is applicable to the assessment and calculation of the comprehensive energy consumption of sawn timber production enterprises.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 153 conifer sawn timber GB/T 1933 Wood Density Determination Method GB/T 2589 General rules for comprehensive energy consumption calculation GB/T 4817 broadleaf tree sawn timber GB/T 6422 energy-using equipment energy test guidelines GB/T 15316 Energy Conservation Monitoring Technology General GB 17167 Energy-using unit energy metering equipment management and general rules

3 Terms and definitions

The following terms and definitions as defined in GB/T 153 and GB/T 4817 apply to this document. 3.1 The amount of physical energy actually consumed by sawn timber production enterprises during the statistical reporting period shall be discounted according to the prescribed calculation methods and measurement units. Calculated as the sum of standard coal. 3.2 Sawn timber production unit output comprehensive energy consumption comprehensiveenergyconsumptionforunitoutputofsawntimberproduc- Tion During the statistical reporting period, the ratio of the comprehensive energy consumption of sawn timber production to the output of qualified sawn timber in the same period. 3.3 Sawn timber unit production basic energy consumption basicenergyconsumptionforunitoutputofsawntimberproduction The proportion of sawn timber produced in high-density trees is 50%~75%, the log diameter is 30cm~38cm, and the thickness of sawn timber is 25mm~35mm. The energy consumption for sawing accounts for 55%~60% of the energy consumption of direct production. The average temperature during the statistical period is 20°C~35°C, and the length of sawn timber is 4m~6m. The amount of energy consumed to produce 1m3 of qualified sawn timber. 3.4 Direct production system directproductionsystem The general term for major production processes such as unloading, loading, sawing, workshop transportation, sorting, stacking and loading. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1062-2025_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1062-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1062-2025_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1062-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version LY/T 1062-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1062-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.