LY/T 1028-2013 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
LY/T 1028-2013	399	Add to Cart	3 days	Chain sawing machine for cross-cutting	Obsolete
LY/T 1028-1991	199	Add to Cart	2 days	(Chain transverse machine parameters)	Obsolete

Similar standards

LY/T 3022   LY/T 1346   SL 470   LY/T 1286   LY/T 1031   LY/T 1020   

Basic data

Standard ID: LY/T 1028-2013 (LY/T1028-2013)
Description (Translated English): Chain sawing machine for cross-cutting
Sector / Industry: Forestry Industry Standard (Recommended)
Classification of Chinese Standard: B97
Classification of International Standard: 79.120.99
Word Count Estimation: 10,161
Older Standard (superseded by this standard): LY/T 1028-1991; LY/T 1029-1991; LY/T 1030-1991
Quoted Standard: GB/T 191; GB/T 3766; GB 5226.1; GB/T 13306; GB/T 13384; GB/T 18262; JB/T 9953; LY/T 1187; LY/T 1188
Regulation (derived from): State Forestry Bulletin No. 14 of 2013
Issuing agency(ies): State Forestry Administration
Summary: This standard specifies the terms and definitions transverse chain saws, the main parameters, requirements, inspection rules and signs, packaging, storage and so on. This standard applies to truncate the logs, board Fangcai transverse chain saws.

LY/T 1028-2013: Chain sawing machine for cross-cutting

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Chain sawing machine for cross-cutting ICS 79.120.99 B97 People's Republic of China forestry industry standards Replacing LY/T 1028-1991, LY/T 1029-1991 and LY/T 1030-1991 Chain cross cut saw Posted on.2013-10-17 2014-01-01 implementation State Forestry Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009 "Standardization Guide Part 1. Structure and preparation of standards." This standard is the LY/T 1028-1991 "cross-sectional machine parameters", LY/T 1029-1991 "cross-sectional machine accuracy" and LY/T 1030-1991 "Chain cross-machine manufacturing and acceptance conditions" revision. After the revision of the three standards will be merged into a "chain-type cross-cut saw," Ben Compared with the original standard, the main differences are as follows. --- Modify the standard name; --- Revised and increased the standard normative references; --- Added terms and definitions; --- Schematic changes have been made; --- revised parameter series; --- Revised part of the terms of the request; --- revised inspection rules. Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents. This standard by the National Panel Machinery Standardization Technical Committee (SAC/TC66) and focal point. This standard was drafted. Wood Industry Research Institute of China Academy of Forestry, Pan'an County, Zhejiang Kangli Machinery Factory. The main drafters of this standard. Zhang Zhankuan, Li Weiguang, Yang Yao Chun. This standard replaces the standards previously issued as follows. --- LY/T 1028-1991; --- LY/T 1029-1991; --- LY/T 1030-1991. Chain cross cut saw

1 Scope

This standard specifies the chain cross-cut saw terms and definitions, the main parameters, requirements, inspection rules and signs, packaging, storage and so on. This standard applies to truncated logs, board square cross-cut chainsaw.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB/T 3766 Hydraulic System General Specifications GB 5226.1 Safety of machinery - Electrical machinery and electronic equipment - Part 1. General specifications GB/T 13306 signs GB/T 13384 mechanical and electrical product packaging General technical conditions GB/T 18262 General requirements for wood-based panel machinery Woodworking machines - Acoustical noise (pressure) level measurement method LY/T 1187 chainsaw saw chain LY/T 1188 chain saw guide

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Guidebar effective length guidebarcuttinglength The distance measured from the end of the guide to the top of the guide or the top of the guide sprocket as measured along the center axis of the guide length. 3.2 Saw area sawingarea Refers to the sawn timber area, excluding the area of bark, hollow and decayed wood.

4 sketch

Chain cross cut saw is divided into mobile and fixed type. Schematic diagram of chain cross cut saw shown in Figure 1, Figure 2. ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1028-2013_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1028-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1028-2013_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1028-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version LY/T 1028-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1028-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.