LY/T 1002-2012 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1002-2012: Pole on the truck
Status: Valid

LY/T 1002: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
LY/T 1002-2012	159	Add to Cart	3 days	Pole on the truck	Valid
LY/T 1002-1991	199	Add to Cart	2 days	(Car column)	Obsolete

Similar standards

GB/T 18107   LY/T 1184   LY/T 1650   LY/T 1502   LY/T 1293   LY/T 1509   

Basic data

Standard ID: LY/T 1002-2012 (LY/T1002-2012)
Description (Translated English): Pole on the truck
Sector / Industry: Forestry Industry Standard (Recommended)
Classification of Chinese Standard: B68
Classification of International Standard: 79.040
Word Count Estimation: 6,648
Older Standard (superseded by this standard): LY/T 1002-1991
Quoted Standard: GB/T 144; GB/T 11716; GB/T 17659.1; LY/T 1511
Regulation (derived from): State Forestry Administration Notice 2012 No. 5; industry standard filing Notice 2012 No. 4 (No. 148 overall)
Issuing agency(ies): State Forestry Administration
Summary: This standard specifies requirements for vehicle column, sampling methods, test methods, volume calculations and product logos. This standard applies to railway wagons loaded timber for retaining and reinforcing bar trail logs.

LY/T 1002-2012: Pole on the truck

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pole on the truck ICS 79.040 B68 People's Republic of China Forestry Industry Standard Replacing LY/T 1002-1991 Car column Published on.2012-02-23 2012-07-01 implementation State Forestry Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces LY/T 1002-1991 "Car Pillar". The main changes in this standard compared with LY/T 1002-1991 are as follows. ---Adjusted the tree species regulations; ---Adjusted the size specification; --- To tighten the limits of defects such as bends and knots; --- Increased the limits of trauma and partial defects; --- Increased sampling methods; --- Added product logo. This standard is proposed and managed by the National Timber Standardization Technical Committee Wood Saw Timber Subcommittee (SAC/TC41/SC2). This standard was drafted. Heilongjiang Ecological Engineering Vocational College. The main drafters of this standard. Xu Qingfu, Zhang Zhiwen, Jin Mingtie, Qi Xiangdong, Liu Huifeng, Li Qi, Liu Zhenhai. The previous versions of the standards replaced by this standard are. ---LY 114-1962; ---LY/T 1002-1991. Car column

1 Scope

This standard specifies the requirements of the column, sampling method, inspection method, volume calculation and product mark. This standard is applicable to small-diameter logs used for blocking and reinforcement when railway wagons are loaded with timber.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 144 log inspection GB/T 11716 Trail Log GB/T 17659.1 Sawmills for batch inspection and sampling - Part 1 . Methods and methods LY/T 1511 Log Product Marking

3 requirements

3.1 Tree species Larch, Spruce, Hemlock, P. massoniana Lamb, Yunnan pine (P.yunnanensisFranch) and other suitable conifer species and hard broad-leaved species. 3.2 size 3.2.1 Length gauge Length gauge. 2.8m, tolerance. 6-2cm. 3.2.2 gauge diameter Conifer species. 9cm~12cm, hard broad-leaved tree species. 8cm~12cm. The gauge diameter is upgraded by 1cm. The diameter of the big head must not exceed 16cm. 3.3 Limitation of defects The allowable limits of defects shall comply with the requirements of Table 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1002-2012_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1002-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1002-2012_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1002-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version LY/T 1002-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1002-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.