JJG 595-2002 English PDF

US$449.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 595-2002: Verification Regulation of Colorimeters and Color Difference Meters
Status: Valid

JJG 595: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
JJG 595-2002	449	Add to Cart	3 days	Verification Regulation of Colorimeters and Color Difference Meters	Valid
JJG 595-1989	479	Add to Cart	4 days	Verification Regulation of Colori-meter and Color Differences Meter	Obsolete

Similar standards

JJG 879   JJG 245   JJG 810   JJG 452   JJG 512   JJG 211   

Basic data

Standard ID: JJG 595-2002 (JJG595-2002)
Description (Translated English): Verification Regulation of Colorimeters and Color Difference Meters
Sector / Industry: Metrology & Measurement Industry Standard
Classification of Chinese Standard: A60
Word Count Estimation: 17,197
Date of Issue: 2002-09-13
Date of Implementation: 2003-03-13
Older Standard (superseded by this standard): JJG 595-1989
Quoted Standard: GB/T 5698-2001; GB/T 3978-1994
Issuing agency(ies): State Administration of Quality Supervision, Inspection and Quarantine
Summary: This standard applies to integral photoelectric colorimeter measurement of the initial verification, testing and use of the follow-up inspection. Optical integral colorimeter measurement of shape identification, prototype testing to measure the performance requirements may refer to the order.

JJG 595-2002: Verification Regulation of Colorimeters and Color Difference Meters

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Colorimeters and Color Difference Meters National Metrology Verification Regulations of the People's Republic Colorimetric colorimeter Released on.2002-09-13 2003-03-13 implementation The General Administration of Quality Supervision, Inspection and Quarantine issued Replace JJG 595-1989 This regulation was approved by the General Administration of Quality Supervision, Inspection and Quarantine on September 13,.2002, and Implemented on March 13,.2003. Focal Point. National Optical Metrology Technical Committee Main drafting unit. China Institute of Metrology Participated in drafting unit. Beijing Kangguang Instrument Co., Ltd. China Testing Technology Research Institute This procedure entrusts the National Optical Metrology Technical Committee to explain The main drafters of this procedure. Ma Wei (China Institute of Metrology) Yuan Yuxin (Beijing Kangguang Instrument Co., Ltd.) Zhu Yin (China Institute of Metrology) Participate in the drafters. Li Xiaobin (China Testing Technology Research Institute) Zhou Yan (China Testing Technology Research Institute) Yu Deping (China Testing Technology Research Institute)

table of Contents

1 Scope (1) 2 Citations (1) 3 Overview (1) 3.1 Principles (1) 3.2 Calculation formula (2) 4 Metrological performance requirements (3) 4.1 Stability (3) 4.2 Repeatability (3) 4.3 Recurrence (3) 4.4 indication error (3) 4.5 Supporting work standard board (3) 5 General technical requirements (3) 5.1 Appearance (3) 5.2 Lighting and observation conditions (4) 6 measuring instrument control (4) 6.1 Verification conditions (4) 6.2 Verification project (4) 6.3 Verification method (4) 6.4 Processing of verification results (5) 6.5 verification period (5) Appendix A Regulations on Lighting and Observation Conditions for Colorimetric Colorimeters and Colorimeters (7) Appendix B The relationship between the colorimetric colorimeter response and the tristimulus value (8) Appendix C Verification certificate page format (10) Appendix D Table of Weighting Coefficients for Standard Illumination and Spectral Tristimulus Values (11) Colorimetric colorimeter verification procedure

1 Scope

This procedure is applicable to the first verification, subsequent verification and in-use inspection of the photoelectric integral colorimetric color difference meter. Photoelectric product The specification and identification of the fractional colorimeter and the measurement performance requirements in the prototype test can be carried out with reference to this regulation.

2 Citations

GB/T 5698-2001 "Color Terminology" GB/T 3978-1994 "Standard lighting and lighting observation conditions" When using this procedure, care should be taken to use the current valid version of the above cited documents.

3 Overview

3.1 Principle The colorimeter is used to measure the surface color and chromatic aberration of non-fluorescent objects. Colorimeter (including colorimeter, below) The same is composed of three parts. the lighting system, the detection system and the data processing system, and the output result (or the necessary number) Learning processing) is the tristimulus value X, Y, Z (or X10, Y10, Z10), calculated chromatic coordinates x, y or color difference. The total spectral sensitivity of the instrument (light source, optics) according to the color measurement principle recommended by the International Commission on Illumination (CIE) The comprehensive response of the system and the detector should be in accordance with the relationship of formula (1) or formula (2). For C/2°. ï) (1) For D65/10°. ï) (2) Where. S(λ)---relative spectral power distribution of the instrument source; SC(λ), SD(λ)---the relative spectral power of the standard illuminant C and the standard illuminant D65, respectively cloth; K1, K2, K3---wavelength-independent constants; Τx(λ), τy(λ), τz(λ)---relative spectral transmission of a modified filter that fits the color vision characteristics of the human eye in the instrument ratio; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 595-2002_English be delivered?

Answer: Upon your order, we will start to translate JJG 595-2002_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 595-2002_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 595-2002_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 595-2002?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 595-2002 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.