JJG 453-2002 English PDF

US$779.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 453-2002: Verification Regulation of Color Standard Plates
Status: Valid

JJG 453: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
JJG 453-2002	779	Add to Cart	5 days	Verification Regulation of Color Standard Plates	Valid
JJG 453-1986	RFQ	ASK	6 days	Verification Regulation of Reflecting Colour Standard Plates	Obsolete

Similar standards

JJG 178   JJG 245   JJG 810   JJG 211   JJG 512   JJG 452   

Basic data

Standard ID: JJG 453-2002 (JJG453-2002)
Description (Translated English): Verification Regulation of Color Standard Plates
Sector / Industry: Metrology & Measurement Industry Standard
Classification of Chinese Standard: A60
Word Count Estimation: 30,319
Date of Issue: 2002-09-13
Date of Implementation: 2003-03-13
Older Standard (superseded by this standard): JJG 453-1986
Issuing agency(ies): State Administration of Quality Supervision, Inspection and Quarantine
Summary: This standard applies to non-fluorescent colorimetric measurement of reflection and transmission standard standard color palette (hereinafter collectively referred to as the standard color) of the initial verification, testing and use of the follow-up inspection.

JJG 453-2002: Verification Regulation of Color Standard Plates

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Color Standard Plates National Metrology Verification Regulations of the People's Republic Standard swatch Released on.2002-09-13 2003-03-13 implementation The General Administration of Quality Supervision, Inspection and Quarantine issued Replacing JJG 453-1986 This regulation was approved by the General Administration of Quality Supervision, Inspection and Quarantine on September 13,.2002, and Implemented on March 13,.2003. Focal Point. National Optical Metrology Technical Committee Main drafting unit. China Institute of Metrology Participated in drafting unit. China Testing Technology Research Institute This procedure entrusts the National Optical Metrology Technical Committee to explain The main drafters of this procedure. Ma Wei (China Institute of Metrology) Chen Yuju (China Institute of Metrology) Zhu Yin (China Institute of Metrology) Participate in the drafters. Li Xiaobin (China Testing Technology Research Institute) Yu Deping (China Testing Technology Research Institute) Zhou Yan (China Testing Technology Research Institute)

table of Contents

1 Scope (1) 2 Overview (1) 2.1 Principles of verification (1) 2.2 chromaticity calculation formula (1) 3 Metrological performance requirements (2) 3.1 Uncertainty (2) 3.2 annual change (2) 4 General technical requirements (2) 4.1 General technical requirements for reflective standard swatches (2) 4.2 General technical requirements for transmission standard swatches (2) 5 measuring instrument control (2) 5.1 Verification conditions (2) 5.2 Verification project (3) 5.3 Verification method (3) 5.4 Verification result processing (5) 5.5 Verification cycle (5) Appendix A Reflection Standard Swatch Uncertainty Analysis (6) Appendix B Verification certificate page format (9) Appendix C Weighting factors for spectral tristimulus values of CIE standard illuminants and CIE1931 standard chromatic observers (10) Appendix D Weighting factors for spectral tristimulus values of CIE standard illuminants and CIE 1964 standard chromatic observers (18) Standard swatch verification procedure

1 Scope

This procedure applies to non-fluorescent reflective standard swatches and transmissive standard swatches for colorimetric measurement (hereinafter collectively referred to as standard colors) First verification, subsequent verification and in-use inspection of the board).

2 Overview

Standard swatches are measuring instruments used to measure color. Standard swatches can be used to calibrate color measurement instruments, or as a target The criteria for judging color samples. Standard swatches can be made from different materials depending on the application. Reflective standard swatches using barium sulphate, oxygen Powdered with magnesium or polytetrafluoroethylene (PTFE); or made of ceramic, enamel, opal glass, etc. Special reflective standard swatches can be made from fabric, cardboard, plastic, etc. Transmission standard swatches are generally made of tinted glass or Made of materials such as plastic with uniform color and good transparency. 2.1 Principle of verification The chromaticity value of a standard swatch, the spectral inverse (radiation) ratio of its surface, the spectral power distribution of a standard illuminant, and The standard chroma observer is determined by spectral tristimulus values. The spectral reflectance of the reflective standard swatch must be in absolute spectral reflectance, ie, the reflectance is equal to 1, and the luminance is divided. The ideal fully reflective diffuser of the cloth independent of direction is the reflectance standard. The spectral transmittance of the transmission standard swatch is based on the air layer equal to the thickness of the sample being tested as the transmittance standard. 2.2 chromaticity calculation formula 2.2.1 The tristimulus values of the standard swatches X, Y, Z are calculated according to equation (1). X=K∑ Y=K∑ Z=K∑ Ïï Λλ (1) Where. λ---wavelength. The chromaticity calculation wavelength range is 380~780nm; S(λ)---the relative spectral power distribution of the CIE standard illuminant; It Φ(λ)---the spectral reflectance of the reflective standard swatch [represented by ρ(λ)] or the transmission mark The spectral transmittance of the quasi-color plate [represented by τ(λ)]; Δλ---wavelength interval. For primary standard swatches, standards with strong spectral selectivity Swatches or standard swatches with special requirements, usually 5nm; for secondary Standard swatch or standard swatch with less spectral selectivity, usually 10 nm; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 453-2002_English be delivered?

Answer: Upon your order, we will start to translate JJG 453-2002_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 453-2002_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 453-2002_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 453-2002?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 453-2002 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.