JJG 379-2009 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
JJG 379-2009	879	Add to Cart	4 days	Verification Regulation of Wide Range Dauges Reading in 0.01mm	Obsolete
JJG 379-1995	479	Add to Cart	4 days	Verification Regulation of Wide Range Dial Gauges Reading in 0. 01mm	Obsolete

Similar standards

JJG 517   JJG 5   JJG 0061   JJG 658   JJG 741   JJG 601   

Basic data

Standard ID: JJG 379-2009 (JJG379-2009)
Description (Translated English): Verification Regulation of Wide Range Dauges Reading in 0.01mm
Sector / Industry: Metrology & Measurement Industry Standard
Classification of Chinese Standard: A52
Classification of International Standard: 17.040
Word Count Estimation: 22,238
Date of Issue: 2009-07-10
Date of Implementation: 2010-01-10
Older Standard (superseded by this standard): JJG 379-1995
Quoted Standard: JJF 1001-1998; JJF 1130-2005; JJF 1094-2002; GB/T 1219-2008; GB/T 18761-2007
Regulation (derived from): AQSIQ Announcement No. 78 of 2009
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine
Summary: This standard applies to dividing the value/resolution is 0. 01mm, measuring range upper limit is greater than 10mm, less than or equal to 100mm of Analog digital dial indicator with a large range of initial verification, testing and use of follow-up inspection.

JJG 379-2009: Verification Regulation of Wide Range Dauges Reading in 0.01mm

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Wide Range Dauges Reading in 0.01mm People's Republic of China National Metrological Verification Procedures Large scale dial indicator Posted.2009-07-10 2010-01-10 implementation General Administration of Quality Supervision, Inspection and Quarantine released Large scale dial indicator verification procedures Replacing JJG 379-1995 This Regulation was approved by the General Administration of Quality Supervision, Inspection and Quarantine on July 10,.2009 and has been issued since January 10,.2010 shall come into force. Administrative Organization. National Geometrical Engineering Parameters Measurement Technical Committee Drafting unit. Tianjin Institute of Metrology Supervision and Inspection Guilin measuring cutting tools limited liability company China Test Technology Research Institute This procedure entrusts the national geometric quantity engineering parameter measurement technical committee to be responsible for explaining Drafters of this Code. Wang Xinhang (Tianjin Institute of Metrology Supervision and Inspection) Liu Jiali (Tianjin Institute of Metrology, Supervision and Inspection) Jianhua Sun (Tianjin Institute of Metrology Supervision and Inspection) Zhao Weirong (Guilin measuring cutting tools limited liability company) Yong-Kang Chen (China Institute of Test Technology)

table of Contents

1 Scope (1) 2 References (1) 3 Overview (1) 4 Metrology Requirements (2) 4.1 pointer end and dial engraved width (2) 4.2 Probe surface roughness (2) 4.3 measuring force (2) 4.4 digital dial indicator shows the value of drift (2) 4.5 Indication Variability (2) 4.6 rod by the radial force on the indication of the impact (2) 4.7 indication error (2) 4.8 Return error (3) 5 General technical requirements (3) 5.1 Appearance (3) 5.2 various parts of the interaction (3) 5.3 pointer and dial mutual position (3) 6 measuring instruments control (3) 6.1 test conditions (3) 6.2 test items (4) 6.3 test method (4) 6.4 test results of the treatment (6) 6.5 test cycle (6) Appendix A (0 ~ 50) mm number of large-scale explicit indication of the value of the error measurement uncertainty (7) Appendix B (0 ~ 100) mm pointer large scale indication of the value of the error measurement uncertainty evaluation (10) Appendix C pointer large scale percentile value error and return error data processing example (13) Appendix D digital display of large-scale percentile error and return error data processing example (14) Appendix E Certificate of Conformity and Notice of Conformity (Inside Page) Format (15) Large scale dial indicator verification procedures

1 Scope

This regulation applies to the division value/resolution of 0.01mm, the upper limit of the measurement range is greater than 10mm, less than or equal to 100mm pointer or digital large-scale dial indicator for the first test, follow-up test and in use test.

2 References

General measurement terms and definitions Guidance on the assessment of uncertainty in the calibration of geometric quantities measuring equipment JJF1094-2002 Measurement instrument characterization GB/T 1219-2008 instruction sheet GB/T 18761-2007 digital display instructions When using this code, care should be taken to use the currently valid version of the above cited references.

3 Overview

Large scale dial indicator (hereinafter referred to as the dial indicator) is divided into two types of pointer and digital explicit. Pointer is the use of rack teeth Wheel drive, the linear displacement of the measuring rod into a pointer angular displacement measuring instruments; digital display is the use of electronic sensors And digital display technology, the rod will be displayed straight line displacement measuring instruments. Dial indicator is mainly used to measure the size of parts Inch and shape error and so on. The type shown in Figure 1, Figure 2. Figure 1 pointer dial indicator 1-long pointer; 2-speed pointer; 3-dial; 4-sleeve; 5-rod; 6- probe Figure 2 Explicit dial indicator 1-body; 2-display; 3- function keys; 4-sleeve; 5-rod; 6- probe ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 379-2009_English be delivered?

Answer: Upon your order, we will start to translate JJG 379-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 379-2009_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 379-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 379-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 379-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.