Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

JJG 34-2022 English PDF

Q: How long will the true-PDF of English version of JJG 34-2022 be delivered?

Upon your order, we will start to translate JJG 34-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of JJG 34-2022_English with my colleagues?

Yes. The purchased PDF of JJG 34-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version JJG 34-2022?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 34-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$659.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 34-2022: Dial Gauges
Status: Valid

JJG 34: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
JJG 34-2022	659	Add to Cart	5 days	Dial Gauges	Valid
JJG 34-2008	799	Add to Cart	4 days	Dial Gauges (dial and digital)	Obsolete
JJG 34-1996	599	Add to Cart	4 days	Verification Regulation of Dial Gauges (reading in 0. 01mm and 0. 001mm)	Obsolete
JJG 34-1984	RFQ	ASK	3 days	Verification Regulation of Dial indicator with Scale Division of 0.01 mm	Obsolete

Similar standards

JJG 517 JJG 5 JJG 0061 JJG 28 JJG 24 JJF 034

Basic data

Standard ID: JJG 34-2022 (JJG34-2022)
Description (Translated English): Dial Gauges
Sector / Industry: Metrology & Measurement Industry Standard
Classification of Chinese Standard: A52
Word Count Estimation: 32,357
Date of Issue: 2022-12-07
Date of Implementation: 2023-06-07
Issuing agency(ies): State Administration for Market Regulation

JJG 34-2022: Dial Gauges

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
National Metrology Verification Regulations of the People's Republic of China indicator Dial Gauges Released on 2022-12-07 2023-06-07 Implementation Released by the State Administration for Market Regulation Indicator Calibration Regulations ofDialGauges Replace JJG 34-2008 JJG 379-2009 Responsible unit. National Technical Committee of Geometric Engineering Parameter Metrology Main drafting unit. Tianjin Academy of Metrology Supervision and Testing Science China Institute of Testing Technology Participating in the drafting unit. Dongfang Electric Group Dongfang Electric Co., Ltd. Fifth Institute of Electronics, Ministry of Industry and Information Technology Suzhou Institute of Metrology and Testing Guilin Measuring Tools & Cutting Tools Co., Ltd. This regulation entrusts the National Geometric Engineering Parameter Metrology Technical Committee to be responsible for interpretation The main drafters of this regulation. Lu Ruijun (Tianjin Academy of Metrology Supervision and Testing) Liu Jiali (Tianjin Academy of Metrology Supervision and Testing) Chen Yongkang (China Academy of Testing Technology) Participating drafters. Liu Jun (Dongfang Electric Group Dongfang Electric Co., Ltd.) Changqing (Fifth Institute of Electronics, Ministry of Industry and Information Technology) Wang Yunxiang (Suzhou Metrology and Testing Institute) Zhao Weirong (Guilin Measuring Tools Co., Ltd.)

Introduction (Ⅱ) 1 Scope(1) 2 References(1) 3 Overview(1) 4 Metrological performance requirements (2) 4.1 The width of the end of the pointer of the pointer indicator and the width of the scale line of the dial (2) 4.2 Surface roughness of the measuring surface of the probe (3) 4.3 Stroke of indicator (3) 4.4 Measuring force(3) 4.5 Drift(4) 4.6 Indication variability(4) 4.7 Influence of the radial force on the measuring rod on the indication value (4) 4.8 Indication error(5) 4.9 Backhaul error(7) 5 General technical requirements (7) 5.1 Appearance(7) 5.2 Partial interactions (7) 5.3 Mutual position of the pointer and the dial of the pointer indicator (7) 6 Measuring Instrument Control(7) 6.1 Test environment conditions (7) 6.2 Verification items and verification devices (8) 6.3 Verification method (9) 7 Test result processing (12) 8 test cycles(12) Appendix A Data Processing Example A of Pointer Indication Value Error and Return Error (13) Appendix B Data Processing Example B of Pointer Indication Value Error and Return Error (14) Appendix C Data Processing Example A of Digital Display Value Error and Return Error (16) Appendix D Data Processing Example B of Digital Display Value Error and Return Error (19) Appendix E Inspection Certificate/Inner Page Information and Format of Inspection Result Notification (21)

Introduction

JJF1001-2011 "General Metrology Terms and Definitions", JJF1002-2010 "National Metrology Verification Regulations Compilation" "Rules" together constitute the basic series of norms for the revision of this regulation. This regulation is a revision of JJG 34-2008 "Indicating Meter (Pointer, Digital Display)" and JJG 379-2009 "Mass Consolidated revisions made in the Cheng Percentage Table. GB/T 1219-2008 "Instruction Sheet" was cited and referenced during the revision process And the relevant provisions of GB/T 18761-2007 "Electronic Digital Display Indicator" and other standards, and JJG 34-2008 and Compared with JJG 379-2009, the main technical changes except editorial modifications are as follows. --- Added a pointer indicator with a division value of 0.1mm and an upper limit of the measuring range not greater than 100mm, with a resolution of 0.001mm, the upper limit of the measurement range is not greater than 30mm digital display indicator, the resolution is 0.005mm, the measurement General technical requirements and metrological performance requirements for digital display indicators whose range upper limit is not greater than 50mm and corresponding inspection The relevant content of the method; ---Delete the requirement on the diameter of the shaft sleeve in 4.3 of the original regulations; --- According to JJF1001-2011 "General Measurement Terms and Definitions", change "repeatability" to "indicated value change sex"; --- Deleted in JJG 34-2008, for the indicator table with a division value of 0.002mm, any 0.05mm indicator The value error is measured by the positive stroke (fill point segment); ---Readjust the interval between the verification of the indicator; the technical requirements of the "first verification" and "subsequent verification" merge; --- Added the requirement for any 0.2mm indication error of the pointer indicator; ---Delete the evaluation part of the uncertainty of measurement results in Appendix A of JJG 34-2008 and JJG 379-2009; ---Modified the data processing of appendix A, appendix B, appendix C, appendix D indication value error and return error example. The previous releases of JJG 34-2008 are as follows. ---JJG 34-1996; ---JJG 34-1984, JJG 231-1980; The previous releases of JJG 379-2009 are as follows. ---JJG 379-1995. Indicator Calibration Regulations

1 Scope

This regulation applies to pointer indicators with a division value of 0.001mm and an upper limit of the measurement range not greater than 5mm; Pointer-type indicators with a precision value of 0.002mm and an upper limit of the measuring range not greater than 10mm; resolution of 0.001mm, Digital indicator with the upper limit of the measuring range not greater than 30 mm; the resolution is 0.005 mm, and the upper limit of the measuring range is not greater than Digital display indicators larger than 50mm; the division value/resolution is 0.1mm, 0.01mm, and the upper limit of the measuring range is not The initial verification, follow-up verification and in-use inspection of pointer type and digital display indicators larger than 100mm.

2 References

This procedure references the following documents. GB/T 1219-2008 instruction table GB/T 18761-2007 Electronic digital display indicator For dated references, only the dated version applies to this regulation; for undated references document, its latest version (including all amendments) applies to this regulation.

3 Overview

Indicators are divided into two categories. pointer type and digital display type. The pointer indicator table is driven by rack and pinion or lever and tooth It is a measuring instrument that converts the linear displacement of the measuring rod into the angular displacement of the pointer; the digital display indicator is transmitted through the measurement. A measuring instrument that digitally displays the linear displacement of the measuring rod by a sensor. The indicator is mainly used to measure the size and shape of the workpiece bit error etc. Its structural type is shown in Figure 1~Figure 3. Figure 1 Schematic diagram of pointer indicator 1-table body; 2-bezel; 3-rotation pointer; 4-dial; 5- pointer; 6- sleeve; 7- measuring rod; 8- measuring head ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 34-2022_English be delivered?

Answer: Upon your order, we will start to translate JJG 34-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 34-2022_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 34-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 34-2022?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 34-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.