JJG 292-2009 English PDFJJG 292: Historical versions
Basic dataStandard ID: JJG 292-2009 (JJG292-2009)Description (Translated English): Verification regulation of rubidium atomic frequency standards Sector / Industry: Metrology & Measurement Industry Standard Classification of Chinese Standard: A57 Classification of International Standard: 17.080 Word Count Estimation: 23,255 Date of Issue: 2009-07-10 Date of Implementation: 2010-01-10 Older Standard (superseded by this standard): JJG 292-1996 Regulation (derived from): AQSIQ Announcement No. 78 of 2009 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine Summary: This standard applies to rubidium atomic frequency standard initial verification, testing and use of subsequent verification. JJG 292-2009: Verification regulation of rubidium atomic frequency standards---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Verification regulation of rubidium atomic frequency standards State verification procedures People's Republic of China Rubidium atomic frequency standard Posted 2009-07-10 2010-01-10 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Rubidium atomic frequency standard test procedures Standards Replacing JJG 292-1996 The regulations by the State Administration of Quality Supervision, Inspection and Quarantine July 10, 2009 for approval and self From January 10, 2010 into effect. Focal point. the National Commission on Time and Frequency Measurement Technology Main drafting unit. CASIC hospital two hundred and three Participated in the drafting unit. China Institute of Metrology Chinese Academy of Sciences, Wuhan Institute of Physics and Mathematics Frequency Technology Co., Ltd. Sichuan days when China Aoxing The national time and frequency measurement procedures commissioned technical committee responsible for the interpretation The main drafters of this procedure. Xu Yueqing (CASIC hospital two hundred and three) Jiangdong Wei (CASIC hospital two hundred and three) Drafters participate. Ma Xiulan (China Institute of Metrology) Shengrong Wu (Chinese Academy of Sciences, Wuhan Institute of Physics and Mathematics) Yang Lin (Frequency Technology Co., Ltd., Sichuan days when China Aoxing) table of Contents1 Scope (1) 2 Terms (1) 2.1 Power Characteristics (1) 2.2 frequency reproducibility (1) 3 Overview (1) 4 metering performance requirements (1) 4.1 Output signal (1) 4.2 Harmonic and non-harmonic (2) 4.3 Power Characteristics (2) 4.4 Frequency stability (2) 4.5 Phase Noise (2) 4.6 day frequency drift rate (3) 4.7 frequency reproducibility (3) 4.8 Frequency accuracy (3) 4.9 Frequency adjustment range (3) 5 General technical requirements (3) 5.1 Appearance (3) 5.2 Other requirements (3) 6 Control of measuring instruments (3) 6.1 Verification condition (3) 6.2 test items and test methods (4) 6.3 test results processing (12) 6.4 test cycle (12) Appendix A test certificate (in-page) format (13) Appendix B test results of notice (in-page) format (16) Rubidium atomic frequency standard test procedures1 ScopeThe order applies to the rubidium atomic frequency standards (hereinafter referred to as rubidium frequency standard, rubidium atomic frequency GNSS including control Standard) initial verification, subsequent verification and in-service inspection. Note. GNSS is GlobalNavigationSateliteSystem the acronym for Global Navigation Satellite System.2 Terms2.1 Power characteristics (Warm-up) After the rubidium frequency standard power-on lock, the lock period of time T (see the product manual predetermined value), the lock 1 hour, 2 hours 4 hours frequency accuracy, and the time required to reach a given frequency accuracy when. 2.2 frequency reproducibility (frequencyrepeatability) Rubidium frequency standard boot after shutdown period of time T1, T2 after some time off, then boot phase after a period of time T3 Consistent with the extent of the relative frequency deviation and the mean average frequency deviation shutdown. T1, T3 rubidium frequency standard for the technical description Book predetermined warm-up time, T2 is usually 24 hours.3 OverviewRubidium frequency standard is a passive atomic frequency standard, rubidium frequency standard within the oscillation frequency of the oscillator by a frequency synthesis techniques to produce a Microwave excitation signal, rubidium isotope 87Rb atoms occur in the transition induced excitation signal, micro atomic transition Wave signal and generating an error signal from the frequency discriminator role by servo-locked loop oscillator frequency, the frequency of the excitation signal lock Given to the atomic transition frequency, to achieve highly stable and accurate crystal oscillator output frequency. The basic principle is shown in Fig. Figure 1 rubidium atomic frequency standard works GNSS control rubidium frequency standard is the use of global navigation satellite system signals and constantly adjust the output frequency rubidium frequency standards, so Its frequency has a greater accuracy. Rubidium frequency standard is widely used in the field of radio navigation and positioning, digital communications engineering, time and frequency measurement.4 metering performance requirements4.1 Output signal 4.1.1 frequency signal Frequency. 1MHz, 5MHz, 10MHz. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JJG 292-2009_English be delivered?Answer: Upon your order, we will start to translate JJG 292-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of JJG 292-2009_English with my colleagues?Answer: Yes. The purchased PDF of JJG 292-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version JJG 292-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 292-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |