Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

JJG 180-2004 English PDF

JJG 180: Historical versions

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
JJG 180-2004RFQ ASK 3 days Clearance Detector of Rolling Stock Gauge for Standard Gauge Railway
JJG 180-2002559 Add to Cart 3 days Crystal Oscillator inside the Electrical Measurement Instrument Obsolete
JJG 180-1978199 Add to Cart 2 days Verification Regulation of Quartz Crystal Oscillator within Electronic Counter Obsolete

Similar standards

JJG 249   JJG 404   JJG 134   

Basic data

Standard ID: JJG 180-2004 (JJG180-2004)
Description (Translated English): Clearance Detector of Rolling Stock Gauge for Standard Gauge Railway
Sector / Industry: Metrology & Measurement Industry Standard

JJG 180-2002: Crystal Oscillator inside the Electrical Measurement Instrument

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Crystal Oscillator inside the Electrical Measurement Instrument National Metrology Verification Regulations of the People's Republic Quartz crystal oscillator in electronic measuring instrument Released on November 11,.2002 Implementation of.2003-05-04 The General Administration of Quality Supervision, Inspection and Quarantine issued Replace JJG 180-1978 This regulation was approved by the General Administration of Quality Supervision, Inspection and Quarantine on November 4,.2002, and It will take effect on May 4,.2003. Focal Point. National Time Frequency Measurement Technical Committee Main drafting unit. China Institute of Metrology Participated in the drafting unit. Jiangsu Institute of Metrology and Testing Technology Sichuan Xinghua Time Frequency Technology Co., Ltd. This procedure entrusts the National Time Frequency Measurement Technical Committee to explain The main drafters of this procedure. Zhang Aimin (China Institute of Metrology) Participate in the drafters. Li Liming (China Institute of Metrology) Qiu Feng (Jiangsu Institute of Metrology and Testing Technology) Yang Lin (Sichuan Xinghua Time Frequency Technology Co., Ltd.)

table of Contents

1 Scope (1) 2 Overview (1) 3 Metrological performance requirements (1) 3.1 Boot Characteristics (1) 3.2 Daily frequency fluctuations (1) 3.3 Daily aging rate (1) 3.4 1 second frequency stability (1) 3.5 Frequency reproducibility (1) 3.6 Frequency accuracy (1) 4 General technical requirements (1) 5 measuring instrument control (1) 5.1 Verification conditions (1) 5.2 Verification items and verification methods (2) 5.3 Processing of verification results (7) 5.4 Verification cycle (7) Appendix A The format of the verification certificate of the crystal oscillator in the electronic measuring instrument with crystal frequency output (8) Appendix B Internal calibration of the certificate of the crystal oscillator in the electronic measuring instrument without crystal frequency output (9) Calibration procedure for quartz crystal oscillator in electronic measuring instruments

1 Scope

This procedure is applicable to the first verification, subsequent verification and inspection of quartz crystal oscillators in electronic measuring instruments. Test.

2 Overview

A quartz crystal oscillator (hereinafter referred to as a crystal oscillator) is fabricated using a piezoelectric effect of a quartz crystal. Crystal oscillator by type It is a common crystal oscillator, a temperature-compensated crystal oscillator and a constant-temperature crystal oscillator. Ordinary crystal oscillator by quartz resonator, oscillation circuit, automatic gain control The circuit, the amplifying circuit and the power circuit are composed; the temperature-compensated crystal oscillator also has a temperature compensation circuit; the constant temperature crystal oscillator has a single layer Or double-layer incubator and temperature control circuit. Different types of crystal oscillators have different technical specifications. Crystal oscillator is widely used in electricity Sub-measurement instruments (such as frequency synthesizers, time interval generators, electronic counters, time interval measuring instruments, etc.) For internal time-frequency standards, internal crystal oscillator specifications, especially frequency accuracy, directly affect these electronic measurements. The metering performance of the measuring instrument.

3 Metrological performance requirements

3.1 boot characteristics. 10-6~10-11 3.2 Daily frequency fluctuation. 10-6~10-11 3.3 Daily aging rate. 10-6~10-11 3.4 1 second frequency stability. 10-8~10-12 3.5 Frequency reproducibility. 10-6~10-11 3.6 Frequency accuracy. 10-5~10-10

4 General technical requirements

The front or rear panel of the electronic measuring instrument equipped with the crystal to be inspected shall have the following marks. manufacturer, instrument Model number, instrument serial number and logo. When the instrument is sent for inspection, it must be accompanied by the instruction manual and the verification certificate of the previous verification. book.

5 measuring instrument control

Measurement instrument control includes initial verification, subsequent verification, and in-use inspection. 5.1 Verification conditions 5.1.1 Measurement standards Reference frequency The output frequency is 1MHz, 5MHz, 10MHz. The frequency stability should be better than 3 times the stability of the detected crystal frequency. Other technical indicators such as daily aging rate, startup characteristics, frequency accuracy, etc. should be one order of magnitude better than the crystal being examined. 5.1.2 Auxiliary equipment
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 180-2004_English be delivered?

Answer: Upon your order, we will start to translate JJG 180-2004_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 180-2004_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 180-2004_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 180-2004?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 180-2004 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.