JJG 171-2016 English PDF

US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 171-2016: Ralative Density Balance for Liquid
Status: Valid

JJG 171: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
JJG 171-2016	369	Add to Cart	3 days	Ralative Density Balance for Liquid	Valid
JJG 171-2004	639	Add to Cart	3 days	Verification Regulation of Ralative Density Balance for Liquid	Obsolete
JJG 171-2001	RFQ	ASK	3 days	Railway locomotive wheel Checker VRof
JJG 171-1985	479	Add to Cart	4 days	Verification Regulation of Liquid Specific Gravity Balance	Obsolete
JJG 171-1976	RFQ	ASK	3 days	(Chinese Industry Standard)	Obsolete

Similar standards

JJG 162   GB/T 36126   GB/T 1885   JJG 176   JJG 166   

Basic data

Standard ID: JJG 171-2016 (JJG171-2016)
Description (Translated English): Ralative Density Balance for Liquid
Sector / Industry: Metrology & Measurement Industry Standard
Classification of Chinese Standard: A53
Word Count Estimation: 16,144
Date of Issue: 2016-11-25
Date of Implementation: 2017-05-25
Older Standard (superseded by this standard): JJG 171-2004
Regulation (derived from): State Administration of Quality Supervision, Inspection and Quarantine Notice No.116 of 2016
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine

JJG 171-2016: Ralative Density Balance for Liquid

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ralative Density Balance for Liquid National Metrological Verification Regulation of the People's Republic of China Liquid relative density balance 2016-11-25 release 2017-05-25 implementation State Administration of Quality Supervision, Inspection and Quarantine issued Liquid relative density balance test procedure uid Replacing JJG 171-2004 Focal unit. National Quality and Density Metrology Technical Committee Drafting unit. Shanghai Institute of Metrology and Testing Technology Shandong Institute of Metrology This procedure entrusts the National Quality Density Metrology Technical Committee to explain The main drafters of this procedure. Qu Chaoqing (Shanghai Institute of Metrology and Testing Technology) Shi Li (Shandong Institute of Metrology) Participate in the drafters. Wang Jian (Shanghai Institute of Metrology and Testing Technology)

table of Contents

Introduction (II) 1 Scope (1) 2 References (1) 3 terms and units of measurement (1) 3.1 Terms (1) 3.2 Units of measurement (2) 4 Overview (2) 4.1 Principles (2) 4.2 Use (2) 4.3 Structure (2) 5 Measurement performance requirements (2) 5.1 Maximum allowable error (2) 5.2 Sensitivity (3) 5.3 Division value (3) 6 General technical requirements (3) 6.1 Appearance and logo (3) 6.2 hammer quality (4) 6.3 Supporting equipment requirements (4) 7 Metering device control (4) 7.1 Test conditions (4) 7.2 Verification Items and Verification Methods (5) 8 Verification and processing of test results (7) 8.1 Processing of test results (7) 8.2 Verification cycle (7) Appendix A (0 ~ 40.5) ℃ relative density of distilled water temperature (8) Appendix B Liquid Relative Density Balance Verification Record Form (9) Appendix C Liquid Relative Density Balance Verification Certificate Page Format (10) Appendix D Liquid Relative Density Balance Test Results Page Format (11)

Introduction

JJF1002 "National Metrological Verification Rules", JJF1001 "General Metrology Terms and Definitions" and JJF1229 "Terminology and definition of quality density metrology nouns" together constitute the basic system to support the revision of this procedure specification. The revision of this procedure is mainly based on years of practical application, the JJG 171-2004 part of the description of the repair change. Compared with JJG 171-2004, in addition to editorial changes, the main technical changes are as follows. --- added part of the reference file; --- cancel the special weight and other terms; --- increase the hammer, riding code and other related terms; --- modify the relative density value correction value formula. The previous version of this procedure is released as follows. Liquid relative density balance; JJG 171-2004; --- JJG 171-1985 liquid specific gravity balance. Liquid relative density balance test procedure

1 Scope

This procedure applies to the relative density of liquid relative density of not more than 2.0000 mechanical liquid balance (hereinafter referred to as Balance) of the first test, follow-up test and use of the inspection.

2 reference file

JJG 99-2006 weight Terminology and definitions of quality density metrology nouns JJF1229-2009 OIMLR76-1..2006 (E) Non-automaticweighinginstruments For dated references, only the dated edition applies to this rule; references that are not dated , The latest version (including all amendments) applies to this procedure.

3 terms and units of measurement

3.1 terminology 3.1.1 hammer system weighing system By a relatively fixed volume and quality of the hammer, double hook code and hanging wire composed of the system. 3.1.2 hammer plumb By a relatively fixed volume and mass of glass rods. At 20 ° C, the hammer volume is 5 cm3. 3.1.3 riding rider Place and move the special weight on the beam slot. 3.1.4 hook code hookedweight The top with a hook of 15g weight. 3.1.5 beam slot channelbeam Evenly distributed on the balance beam 10 V-shaped groove, specifically placed a variety of riding code. 3.1.6 Spacing of beams by beam spaceofbeamgraduation The center distance of two adjacent notches. 3.1.7 relative density ralativedensity Refers to the ratio of the material density ρ1 to the reference substance density ρ2 under the specified conditions, that is, d = ρ1 ρ2 , For the amount of dimensionless. The "relative density" in this procedure refers to the ratio of the liquid density ρ at the temperature t to the distilled water at a temperature of 20 ° C, i.e. dt20, whose expression is dt20 = ρ ρ water 3.1.6 Density scale value scaleinterval The relative density difference between any adjacent two slots of the balance. The balance of this rule is equal to one 0.0001 (relative density value). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 171-2016_English be delivered?

Answer: Upon your order, we will start to translate JJG 171-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 171-2016_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 171-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 171-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 171-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.