JJG 157-2008 English PDFJJG 157: Historical versions
Basic dataStandard ID: JJG 157-2008 (JJG157-2008)Description (Translated English): Verification Regulation of Universal Tension and Compression Testing Machines for Non-metallic Sector / Industry: Metrology & Measurement Industry Standard Classification of Chinese Standard: A53 Classification of International Standard: 17.100 Word Count Estimation: 19,124 Date of Issue: 2008-04-16 Date of Implementation: 2008-10-16 Older Standard (superseded by this standard): JJG 157-1995 Quoted Standard: GB/T 16825.1-2002; GB/T 2611-1992; GB/T 17200-1997; GB/T 13783-1992; JJG 762-2007 Regulation (derived from): ?AQSIQ Announcement 2014 No.89 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine Summary: This standard applies to the bulk density is the first test, follow-up test and use the test. JJG 157-2008: Verification Regulation of Universal Tension and Compression Testing Machines for Non-metallic---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Verification Regulation of Universal Tension and Compression Testing Machines for Non-metallic State verification procedures People's Republic of China Non-metallic tension, pressure, and universal testing machine Posted 2008-04-16 2008-10-16 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Non-metallic tension, pressure, and universal testing machine Verification Regulation Replacing JJG 157-1995 The regulations by the State Administration of Quality Supervision, Inspection and Quarantine approved on April 16, 2008, and from From October 16, 2008 into effect. Focal point. the National Technical Committee on Metering hardness force value Main drafting unit. Shanghai Institute of Measurement and Testing China Institute of Metrology Shenzhen sans Materials Testing Limited Shanghai Hualong Test Instrument Co., Ltd. Zhejiang Jing Yuan Machinery Equipment Co., Ltd. Jinan Test Group Participated in the drafting. Castle Test Machine Co., Ltd. On Haideng Jie equipment Limited Zhejiang three new test calibration Ltd. This procedure hardness values measured force commissioned by the National Technical Committee is responsible for interpretation The main drafters of this procedure. Zhang Guiren (Shanghai Institute of Measurement and Testing) Lin (China Institute of Metrology) TRANSACTIONS (Shenzhen sans Materials Testing Limited) Li Mingyi (Shanghai Hualong Test Instruments Co., Ltd.) Xu Weidong (Zhejiang Jing Yuan Machinery Equipment Co., Ltd.) Liang Zhong lift (Jinan Test Group) Drafters participate. Quanxing Army (Castle Testing Machine Co., Ltd.) Qin Xiaofeng (on Haideng Jie equipment Limited) Fang Hongmei (Zhejiang three new test calibration Ltd.) table of Contents1 Scope (1) 2. Referenced Documents (1) 3 Overview (1) 3.1 Structure and Principle (1) Use 3.2 (1) 4 metering performance requirements (1) 4.1 Test force measuring system (1) 4.2 deformation measurement system (2) 5 General technical requirements (3) 5.1 Nameplate and installation (3) 5.2 afterburner system (3) 5.3 measuring means (4) 5.4 safety devices (4) 6 Control of measuring instruments (4) 6.1 Verification condition (4) 6.2 test items and test methods (5) 6.3 test results processing (10) 6.4 test cycle (10) Appendix A coaxial test rods (11) Appendix B testing machine test records reference format (12) Appendix C testing machine test certificate-page format (13) Appendix D testing machine test results of notice-page format (14) Non-metallic tension, pressure, and universal testing machine test procedures1 ScopeThe order applies to non-metallic tension, pressure, and universal testing machine (hereinafter referred to as the tester) the initial verification, after Continued verification and in-service inspection. Non-metallic tension, pressure, and universal testing machine mainly comprises small load testing machine, testing machine small force value to And leather, paper, rubber, plastics, fiber and other non-metallic materials testing machine.2 CitationsCitation of this Regulation as follows. GB/T 16825.1-2002/ISO 7500-1.1999 "static uniaxial testing machines - the first part of Rally And (or) pressure testing machine measuring system test and calibration " GB/T 2611-1992 "Test General technical requirements" GB/T 17200-1997 "rubber plastic tensile, compression, bending test machine technical requirements" GB/T 13783-1992 "Cotton fibers - Determination of breaking strength of flat bundles" JJG 762-2007 "extensometer test procedures" Should pay attention to the use of this procedure by using the currently valid version of the documents cited.3 Overview3.1 Structure and Principle According to the measurement and drivers of different ways, testing machine may have a different structure and principles of work, the main Afterburner systems, measurement systems, safety devices and other components. How it works. afterburner system applied to the specimen test Force measurement system test force, the specimen deformation and test operation. 3.2 Purpose Tensile testing machine is mainly used in non-metallic materials and products, compression measuring performance. With about accessories, also It can be used to test materials and manufactures bending, shear, bending, peeling and other special properties.4 metering performance requirements4.1 Test force measuring system 4.1.1 Classification and Index test force testing machine shall conform to the technical requirements in Table 1. Table 1 Test grading machines and technical specifications Test machine level The maximum allowable value /% qbu f0 α 0.5 ± 0.5 0.5 0.75 ± 0.05 0.25 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JJG 157-2008_English be delivered?Answer: Upon your order, we will start to translate JJG 157-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of JJG 157-2008_English with my colleagues?Answer: Yes. The purchased PDF of JJG 157-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version JJG 157-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 157-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |