Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

JJG 1045-2017 English PDF

US$419.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 1045-2017: Mud Density Meters
Status: Valid

JJG 1045: Historical versions

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
JJG 1045-2017419 Add to Cart 4 days Mud Density Meters Valid
JJG 1045-2008639 Add to Cart 3 days Verification regulation of mud density meter Obsolete
JJG 1045-1993RFQ ASK 6 days Technical Specification of Measurement Assurance Program for Length of Gauge Block Obsolete

Similar standards

GB/T 36126   JJG 1038   GB/T 1885   JJG 1036   JJG 1035   JJG 1047   

Basic data

Standard ID: JJG 1045-2017 (JJG1045-2017)
Description (Translated English): Mud Density Meters
Sector / Industry: Metrology & Measurement Industry Standard
Classification of Chinese Standard: A53
Word Count Estimation: 18,124
Date of Issue: 2017-11-20
Date of Implementation: 2018-05-20
Older Standard (superseded by this standard): JJG 1045-2008
Regulation (derived from): AQSIQ Notice 2017 No. 103
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine

JJG 1045-2017: Mud Density Meters

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Mud density meter verification procedures) National Metrology Verification Regulations of the People's Republic Mud density meter Released on.2017-11-20 2018-05-20 implementation The General Administration of Quality Supervision, Inspection and Quarantine issued Mud density meter verification procedure Replace JJG 1045-2008 Focal Point. National Quality Density Measurement Technical Committee Main drafting unit. Heilongjiang Province Metrology Test and Test Institute Participated in the drafting unit. China Institute of Metrology Hubei Institute of Metrology and Testing Technology This regulation entrusts the National Quality Density Measurement Technical Committee to explain The main drafters of this procedure. Xu Xiuhua (Heilongjiang Metrological Testing and Testing Institute) Participate in the drafters. Xu Changhong (China Institute of Metrology) Ding Haiming (Heilongjiang Metrological Testing and Testing Institute) Li Lei (Heilongjiang Metrological Testing and Testing Institute) Ma Ming (Hubei Institute of Metrology and Testing Technology) Zhao Xin (Heilongjiang Metrological Testing and Testing Institute)

table of Contents

Introduction (II) 1 Scope (1) 2 References (1) 3 terms and units of measurement (1) 3.1 Alternatives (1) 3.2 Special weights (1) 3.3 Discrimination (1) 4 Overview (1) 5 Metrological performance requirements (2) 5.1 Discrimination (2) 5.2 indication error (3) 6 General technical requirements (3) 6.1 Mechanical mud density meter (3) 6.2 Electronic mud density meter (3) 7 Measuring instrument control (3) 7.1 Verification conditions (3) 7.2 Verification items and verification methods (4) 7.3 Processing of verification results (7) 7.4 Verification cycle (7) Appendix A Mechanical Mud Densitometer Verification Record Format (8) Appendix B Electronic mud density meter verification record format (9) Appendix C Mud Densitometer Verification Certificate/Verification Result Notice (inside page) format (10) Appendix D Atmospheric Pressure Free Air (0~40) °C Pure Water Density Table (12)

Introduction

This procedure is prepared in accordance with JJF1002-2010 "Rules for the preparation of national metrological verification procedures", and Compared with JJG 1045-2008, in addition to editorial changes, the main technical changes are as follows. --- Added introduction; --- Added reference files (see 2); --- The choice of "special weight" has been added to the terms and units of measurement (see 3.2); --- "Discrimination [threshold]" changed to "discrimination" (see 3.3); --- The unit of measurement is changed from kg/m3 as the main unit to g/cm3 as the main unit (see 3.4); ---Measurement of measuring instruments including initial inspection, subsequent verification and use of "inspection" into "inspection" (see 7); --- Added additional equipment such as level, pure water, absorbent cotton, tweezers, hair dryer (see Table 2); --- The ambient temperature in the environmental conditions is changed from (5~40) °C to (20±5) °C, and the ambient humidity is not greater than 85% is changed to no more than 75% (see 7.1.2); --- Zero adjustment adds a zeroing method for mud density meters that do not contain 1.000g/cm3 in the measurement range (see 7.2.1.3); --- In the processing of the verification results - indicate that the "cause" of the failure is changed to "project" (see 7.3); ---Atmospheric pressure (0-40) °C air-free pure water density meter changed from t68 to.1990 international temperature scale t90 (see Appendix D). The previous versions of this procedure are released. ---JJG 1045-2008. Mud density meter verification procedure

1 Scope

This procedure applies to the first verification, subsequent verification and in-use inspection of mechanical and electronic mud density meters. its His similarity to the density meter can be calibrated with reference to this procedure.

2 reference files

This procedure refers to the following documents. JJF1229-2009 Terms and definitions of mass density measurement For dated references, only the dated version applies to this Code; any undated quotation The latest version (including all amendments) applies to this procedure.

3 terms and units of measure

3.1 replacement refil Granular materials with a bulk density of more than 5.5 g/cm3, such as copper, stainless steel, lead, etc. (4-10). 3.2 special weight specialweight A metal object having a diameter of less than 5 cm and a shape symmetry or a solid substance having a density close to that of a metal. 3.3 discriminating force discrimination The mass of the largest weight that causes the mechanical mud densitometer to produce an undetected response change.

4 Overview

A mud density meter is an instrument used to measure mud density. The volume of the sample cup is known, and the mud is measured by the weighing method. The mass of the slurry is measured to determine the density of the slurry. Mud density meters are divided into mechanical and electronic types. Mechanical mud The gauge is mainly composed of a support and a lever with a scale. Place the sample cup at one end of the lever and the crucible at the other end. Fill the sample cup with the sample to be tested, move the crucible to balance the lever, and the scale corresponding to the crucible indicates the sample to be tested. density. Mechanical mud density meter is divided into normal pressure mechanical mud density meter according to the internal pressure of the sample cup. (See Figure 1) and a pressurized mechanical mud density meter (see Figure 2). Electronic mud density meter through force sensor measurement The quality of the product, the digital display converts the mass electrical signal into a sample density and displays. Electronic mud density meter from sample The cup, force sensor and digital display (see Figure 3). The mud density meter is suitable for the measurement of mud density in road and bridge construction and the density measurement of drilling fluid. Pressurize Mechanical mud densitometers are used to measure samples containing air or natural gas.
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 1045-2017_English be delivered?

Answer: Upon your order, we will start to translate JJG 1045-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 1045-2017_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 1045-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 1045-2017?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 1045-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.