JJF 1499-2014 English PDFUS$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. JJF 1499-2014: Examination Specification for China Metrology Certification. Taximeters Status: Valid
Basic dataStandard ID: JJF 1499-2014 (JJF1499-2014)Description (Translated English): Examination Specification for China Metrology Certification. Taximeters Sector / Industry: Metrology & Measurement Industry Standard Classification of Chinese Standard: A53 Classification of International Standard: 17.160 Word Count Estimation: 13,142 Date of Issue: 11/17/2014 Date of Implementation: 2/17/2015 Quoted Standard: JJG 517 Regulation (derived from): The State Administration of Quality Supervision, Inspection and Quarantine Notice 2014 No. 125 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine Summary: This standard applies to the taxi meter (hereinafter referred to as the meter) production enterprises producing measurement equipment manufacturing license necessary condition assessment, review and Nissan after the expiration of the supervision and inspe JJF 1499-2014: Examination Specification for China Metrology Certification. Taximeters---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Examination Specification for China Metrology Certification.Taximeters People's Republic of China National Metrology Technical Specifications Taxi meter measurement equipment manufacturing Licensing Examination Prerequisites Taximeters Issued on. 2014-11-17 2015-02-17 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Taxi meter measurement equipment manufacturing Licensing Examination Prerequisites Taximeters Instead of "Taxi tax Meter manufacturing license Evaluation norms " Focal point. the National Technical Committee of shock and vibration measurement speed Drafting. Beijing Institute of Metrology detection Shanghai Measurement and Testing Technology Research Institute This specification entrust national shock and vibration speed measurement technology committee responsible for the interpretation Drafters of this specification. In Baoliang (Beijing Institute of Metrology detection) Qian Ding (Shanghai Institute of Measurement and Testing) Li Wei (Beijing Institute of Metrology detection) table of ContentsIntroduction (Ⅱ) 1 Scope (1) 2. References (1) 3 Technical file (1) 4 production facilities (1) 4.1 General (1) 4.2 production equipment, process equipment and testing equipment (2) 5 Test conditions (3) 5.1 factory inspection accommodation and environmental conditions (3) 5.2 inspectors (3) 5.3 factory inspection equipment (3) 5.4 factory inspection in accordance with (3) 5.5 factory inspection records (3) 6 technical staff (3) 7 safety requirements (4) 8 Other requirements (4) 8.1 production sites (4) Operation in 8.2 meter repair services (4) Appendix A assessment record sheet (5)IntroductionIn order to regulate the taxi meter measurement equipment manufacturing license assessment work to ensure that the assessment of scientific, objective, public Flat, impartiality and effectiveness, according to "manufacture and repair of measuring instruments license supervision and management measures" and "new production of measuring instruments Product management approach "metrology regulations, development of this specification. In the present specification JJG517 "taximeter" verification procedures for the technical basis, combined with our taxi meter Production status device industry, the amount of Zhijijianju document [1999] No. 264, "Revenue Taxi meter manufacturing license Certificate examination norms "be revised. This standard applies to the taxi meter manufacturer measurement equipment manufacturing license assessment, after the expiration of the review And daily supervision and inspection, it is JJF 1246-2010 "measurement equipment manufacturing license examination universal norms" Related Content Supplement. To do this, do this specification. --- Compliance with relevant laws and regulations of the country; --- Scope clear, within its defined, and strive to complete as necessary; --- The requirements of scientific and reasonable, taking into account economic feasibility and implementation. The previous versions of this specification published case. --- December 2, 1999 the State Quality and Technical Supervision (Zhijijianju amount [1999] No. 264) published the text "On the approval issued" taxi meter Fiscal Program for Pattern Evaluation "and" < Fiscal taxi meter manufacturing Xu Permit Examination Norm "notice" in the "taxi meter manufacturing license tax assessment norms." Taxi meter measurement equipment manufacturing license examination Prerequisites1 ScopeThis standard applies to the taxi meter (hereinafter referred to as meter) manufacturer of measurement equipment manufacturing license necessary raw Production conditions assessment, review and daily supervision and inspection after the expiration. 2. References This specification refers to the following documents. JJG517 taximeter For dated references, only the dated edition applies to this specification; undated reference documents Member, the latest edition (including any amendments) applies to this specification.3 Technical fileMeter used to guide product design, production, testing, use and other documents, including product standards, technical regulations Fan, drawings, technical documents, operating instructions and the like. Products (whole and parts) drawings should be complete, consistent, correct, standardize, and should be related to the production process work Card Arts flowchart, procedures or work instructions and processes should be a key step in the inspection records. Standard product implementation and verification procedures should be in force, and relevant technical regulatory system.4 production facilities4.1 General Production facilities including production equipment, process equipment and testing equipment in three parts. 4.1.1 The key parts of the company's own production and processing enterprises should have the appropriate parts production equipment, equipment Type, quantity, technical specifications and performance should be the company's production capacity and processes to adapt. Taiwan should establish equipment Accounts, and records of maintenance equipment. 4.1.2 key parts enterprises to design, contract manufacturing, audited drawings, after confirmation of physical control, visualization For their own production companies, but by the assessment unit should have. a) supply-side survey or evaluation report; b) procurement contracts for outsourcing, the contract should specify the quality and technical requirements; c) outsourcing units qualification documents; d) regular performance evaluation documents the supply side; e) the Association into the factory inspection system, inspection standards and related testing equipment; f) the Association into the factory inspection records, the number of records should be produced, the number of storage match. Key components 4.1.3 meter products should be consistent with the product type evaluation report "an important component list." Key components of the meter products include. a) sensor; ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JJF 1499-2014_English be delivered?Answer: Upon your order, we will start to translate JJF 1499-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of JJF 1499-2014_English with my colleagues?Answer: Yes. The purchased PDF of JJF 1499-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |