Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

JJF 1415-2013 English PDF

US$929.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1415-2013: Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use
Status: Valid
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
JJF 1415-2013929 Add to Cart 6 days Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use Valid

Similar standards

GB/T 36126   JJF 1368   GB/T 1885   JJF 1414   JJF 1416   JJF 1413   

Basic data

Standard ID: JJF 1415-2013 (JJF1415-2013)
Description (Translated English): Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use
Sector / Industry: Metrology & Measurement Industry Standard
Classification of Chinese Standard: A53
Classification of International Standard: 17.100
Word Count Estimation: 40,490
Quoted Standard: JJG 52-2013; GB/T 1226-2010; GB 3836.1-2000; GB 3836.4-2000; GB/T 2423.10-2008; GB/T 2423.101-2008; JB/T 5491-2005; JB/T 5527-2005; JB/T 5528-2005; JB/T 6804-2006; JB/T 8624-1997; JB/T 9252-1999; JB/T 9272-1999; JB/T 9273-1999; JB/T 9274-1999; JB/T 9329-1
Regulation (derived from): ?AQSIQ Announcement 2013 No. 85;
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine
Summary: This standard applies to the measurement range (-0. 1 ~ 250) MPa to spring tube, diaphragm, elastic element diaphragm and bellows pressure-sensing element as a pressure gauge (hereinafter referred to as the instrument) for type evaluation.

JJF 1415-2013: Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use People's Republic of China National Metrology Technical Specifications Usually the elastic element type pressure gauges, pressure vacuum gauge And vacuum gauge type evaluation outline Issued on. 2013-06-27 2013-09-27 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Usually the elastic element type pressure gauges, pressure Vacuum gauge and vacuum gauge type evaluation outline ElasticElementPressureGauges, Pressure-Vacuum esforGeneralUse Focal point. the National Technical Committee of pressure measurement Main drafting unit. Liaoning Provincial Institute of Metrology Tianjin Institute of Supervision and Testing Weighing Participated in the drafting unit. Measurement and Testing Technology Research Institute, Guangzhou Zhejiang Institute of Metrology This outline commissioned the National Technical Committee of pressure measurement shall be interpreted The main drafters of this specification. Wang Bin (Liaoning Provincial Institute of Metrology) Zhang Zijian (Liaoning Provincial Institute of Metrology) Wind-Palace (Tianjin Supervision and Testing Institute of Metrology) Shang Shuangshuang (Liaoning Provincial Institute of Metrology) Drafters participate. Li Zhihao (Guangzhou Institute of Measurement and Testing) Tubin Bin (Zhejiang Institute of Metrology) Lu Tao (Zhejiang Institute of Metrology)

table of Contents

Introduction (Ⅴ) 1 Scope (1) 2. References (1) 3 Terms (1) 4 Overview (2) 5 legal management requirements (2) 5.1 units of measurement (2) 5.2 accuracy class (2) 5.3 legal metrology marking and identification instruments (2) 5.4 External structural design requirements (2) 5.5 provide technical review of documents (2) 5.6 Experimental Prototype (2) 6 measurement requirements (3) 6.1 indicating means (3) 6.2 zero error (3) 6.3 Indication error (3) 6.4 Return Error (4) 6.5 Displacement tap (4) 6.6 Pointer (brush) yaw stability (5) 6.7 Setpoint deviation (5) 6.8 switching difference (5) 7 General Requirements (5) 7.1 extreme conditions (5) 7.2 Reference conditions (5) 7.3 Appearance (6) 7.4 Ultra (static) pressure (6) 7.5 Effect of temperature (6) 7.6 alternating pressure (7) 7.7 resistance to vibration performance work environment (8) 7.8 anti-environmental performance of transport (9) 7.9 Anti-pulsation performance measured medium (9) 7.10 Heat resistance (9) Strength 7.11 (10) 7.12 reverse (10) 7.13 Bending (10) 7.14 ban oil (10) 7.15 air intake area (10) 7.16 energy release (10) 7.17 meter housing (10) 7.18 Permanent brightening agent (10) 7.19 pitch and yaw (10) 7.20 Salt (11) 7.21 Scope (11) Contact off function (11) 7.22 electrical signal device 7.23 insulation (11) 7.24 explosion-proof (12) 7.25 Reverse Power Protection (12) 7.26 Output AC component (12) 7.27 Dead (12) 7.28 power variation (12) 7.29 common-mode interference (13) RFI 7.30 (13) 7.31 external magnetic field (13) 7.32 output load change (13) 8 Type Evaluation Project (13) Test conditions and test methods 9 projects (15) 9.1 type evaluation of the condition (15) 9.2 Test Equipment (15) 9.3 test points (15) 9.4 Test procedure (15) 9.5 indicating means (15) 9.6 zero error (16) 9.7 Indication error (16) 9.8 Return error (17) 9.9 Tapping displacement (17) 9.10 pointer (brush) yaw stability (17) 9.11 Setpoint deviation (17) 9.12 switching difference (18) 9.13 Appearance (18) 9.14 Ultra (static) pressure (18) 9.15 Effect of temperature (18) 9.16 alternating pressure (19) 9.17 resistance to vibration performance work environment (19) 9.18 anti transport environmental performance (20) 9.19 Anti-pulsation performance measured medium (20) 9.20 Heat resistance (20) Strength 9.21 (20) 9.22 reverse (21) 9.23 Bending (21) 9.24 ban oil (21) 9.25 air intake area (22) 9.26 energy release (22) 9.27 meter housing (22) 9.28 Permanent brightening agent (22) 9.29 pitch and yaw (22) 9.30 Salt Spray (23) 9.31 Scope (23) 9.32 electrical signal device contact off function (23) 9.33 insulation (23) 9.34 explosion-proof (24) 9.35 Reverse Power Protection (24) 9.36 Output AC component (24) 9.37 Dead (24) 9.38 power variation (24) 9.39 common-mode interference (25) RFI 9.40 (26) 9.41 external magnetic field (26) 9.42 output load change (26) Processing (27) 10 type of evaluation results A time interval between the test sequence and project appendix (28) Appendix B-type elastic member general pressure gauges, pressure vacuum gauge and vacuum gauge type evaluation recording format (29)

Introduction

JJF 1015 "Measuring Instruments type evaluation and type approval general specification", JJF 1016 "Measuring Instruments type evaluation Outline guidelines for the preparation ", JJF 1002" national verification procedures writing rules "and JJF 1071" National Calibration Specifications writing rules "together constitute the basic series This specification developed. This outline reference GB/T 1226-2010 "General gauge", JJG52 "elastic element gauge general formula, Pressure vacuum gauge and vacuum gauge ", JB/T 5491-2005" diaphragm pressure gauge ", JB/T 5527-2005" Marine Pressure Gauge ", JB/T 6804-2006" seismic pressure gauge ", JB/T 8624-1997" diaphragm pressure gauge " JB/T 9271-1999 "welding, cutting and allied processes gauge", JB/T 9272-1999 "ammonia pressure gauge" JB/T 9273-1999 "electrical contacts", JB/T 9274-1999 "diaphragm pressure gauge", JB/T 10203- 2000 "remote gauge", all the elastic element pressure gauge all included in this outline. At the same time, also with reference to the GB 3836.1-2000 "Electrical apparatus for explosive gas atmospheres - Part 1. General requirements", GB 3836.4- 2000 "explosive gas environment with electrical equipment - Part 4. Intrinsic safety" i "", GB/T 2423.10- 2008 "Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)" GB/T 2423.17-2008 "Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt Fog ", GB/T 2423.101-2008" Environmental testing for electric and electronic products Part 2. Test methods Test. Tilt and sway ", JB/T 5528-2005" Scale and gauge division ", JB/T 9252-1999" Industrial Automation General requirements for basic types of meter pointer portion size and pointer ", JB/T 9329-1999 "Instruments transportation transport storage basic environmental conditions and test methods." Usually the elastic element type pressure gauges, pressure vacuum gauge And vacuum gauge type evaluation outline

1 Scope

This outline is applied to the measurement range (-0.1 ~ 250) MPa to spring tube, diaphragm, bellows and bellows And other elastic element as a pressure-sensing element of the pressure instrument (hereinafter referred to as instrumentation) of pattern evaluation. 2. References This outline cited the following documents. JJG52-2013 general formula elastic element pressure gauges, pressure vacuum gauge and vacuum gauge GB/T 1226-2010 General Pressure Gauge GB 3836.1-2000 Electrical equipment for explosive gas atmospheres - Part 1. General requirements GB 3836.4-2000 Electrical equipment for explosive gas atmospheres Part 4. Intrinsic safety "i" GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt GB/T 2423.101-2008 Environmental testing for electric and electronic products Part 2. Test methods Test. Pour Ramp and swing JB/T 5491-2005 diaphragm pressure gauge JB/T 5527-2005 Marine gauges JB/T 5528-2005 scale and gauge division JB/T 6804-2006 seismic pressure gauge JB/T 8624-1997 diaphragm pressure gauge The basic types JB/T 9252-1999 industrial automation, instrumentation pointer portion size and a pointer General technical requirements JB/T 9272-1999 ammonia pressure gauge JB/T 9273-1999 electrical contacts JB/T 9274-1999 diaphragm pressure gauge JB/T 9329-1999 Instrument transportation transport storage basic environmental conditions and test methods JB/T 10203-2000 remote pressure gauge For dated references, only the dated edition applies to this outline; undated reference documents Member, the latest edition (including any amendments) applies to this outline.

3 Terms

3.1 alternating pressure test cyclicpressuretest
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1415-2013_English be delivered?

Answer: Upon your order, we will start to translate JJF 1415-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1415-2013_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1415-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.