JJF 1236-2010 English PDFUS$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. JJF 1236-2010: Calibration Specification for Semiconductor Device Curve Tracers Status: Valid JJF 1236: Historical versions
Basic dataStandard ID: JJF 1236-2010 (JJF1236-2010)Description (Translated English): Calibration Specification for Semiconductor Device Curve Tracers Sector / Industry: Metrology & Measurement Industry Standard Classification of Chinese Standard: A56 Classification of International Standard: 17.220 Word Count Estimation: 26,228 Date of Issue: 2010-01-05 Date of Implementation: 2010-04-05 Quoted Standard: GB/T 13973-1992; GB/T 13974-1992 Regulation (derived from): ?AQSIQ Announcement 2010 No.3; Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine Summary: This standard applies to its plug-in unit or accessory device has a semiconductor tube curve tracers (hereinafter referred to as tracers) calibration. JJF 1236-2010: Calibration Specification for Semiconductor Device Curve Tracers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Calibration Specification for Semiconductor Device Curve Tracers People's Republic of China National Metrology Technical Specifications Semiconductor curve tracers calibration specification Issued on. 2010-01-05 2010-04-05 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Semiconductor curve tracers calibration specification This specification by the State Administration of Quality Supervision, Inspection and Quarantine approved on January 5, 2010, and from From April 5, 2010 implemented. Focal point. the National Radio Technical Commission metering The main drafting units. China Electronics Standardization Institute Participated in the drafting unit. Beijing Radio Instrument Factory Shanghai New Electronic Instrument Co., Ltd. The specification of the National Radio Technical Commission responsible for the interpretation of measurement The main drafters of this specification. Chenlian Qi (China Electronics Standardization Institute) In Lihong (China Electronics Standardization Institute) Liu Chong (China Electronics Standardization Institute) Drafters participate. Cai Fuming (Beijing Radio Instrument Factory) Xu Changfeng (Shanghai New Electronic Instrument Co., Ltd.) table of Contents1 Scope (1) 2. Referenced Documents (1) 3 Terms (1) 4 Overview (1) 5 Metrological characteristics (2) 5.1 Calibration signal (2) 5.2 Y-axis portion (2) 5.3 X-axis portion (2) 5.4 stepped portion (2) 5.5 Collector power limiting resistor (2) 6 calibration conditions (3) Environmental conditions 6.1 (3) 6.2 Calibration with a standard device and other equipment (3) 7 Calibration methods and calibration items (3) 7.1 calibration items (3) 7.2 Calibration method (4) Presentation 8 calibration results (15) 9 Recalibration interval (15) Appendix A calibration certificate (16) B Measurement Uncertainty instance appendix (19) Semiconductor curve tracers calibration specification1 ScopeThis instruction applies to semiconductor curve tracers with a plug-in unit or accessory device (hereinafter referred to as tracers) Calibration.2 CitationsGB/T 13973-1992 semiconductor curve tracers general technical requirements GB/T 13974-1992 semiconductor curve tracers test methods Use this code should pay attention to using the currently valid version of the documents cited.3 Terms3.1 collector current backflow end colectorcurrentcircuitfluencepoint Back end of the collector current flowing through the current sampling resistor, the symbol "▽" representation. 3.2 staircase signal normalizing circuit normalizedcircuitofstepsignal Staircase signal "normalization circuit" may have a variety of different magnitudes staircase signal (V/level or A/level), by Appropriate scaled, post-treatment becomes unity 1V/value stage processing circuit.4 OverviewTracer from the host section (display and control section), the insertion unit (including Y deflection unit, X deflection Unit, the collector voltage of the scanning unit, staircase signal unit) and the slave device and other components, as shown in a block diagram Shown. Tracer is mainly used for all two-terminal, three-terminal semiconductor device analysis and DC parameters measurements. Widely Used in various electronic components production, scientific research and the use of other departments. Each unit block diagram in Figure 1 Tracer ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JJF 1236-2010_English be delivered?Answer: Upon your order, we will start to translate JJF 1236-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of JJF 1236-2010_English with my colleagues?Answer: Yes. The purchased PDF of JJF 1236-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version JJF 1236-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJF 1236-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |