JJF 1199-2008_English: PDF (JJF1199-2008)
| Standard ID | USD | BUY PDF | Lead-Days | Standard Title (Description) | Status |
| JJF 1199-2008 | 349 |
Add to Cart
|
3 days
|
Calibration Specification of Optical Attenuator for Telecommunications
| Valid |
| Standard ID | JJF 1199-2008 (JJF1199-2008) | | Description (Translated English) | Calibration Specification of Optical Attenuator for Telecommunications | | Sector / Industry | Metrology & Measurement Industry Standard | | Classification of Chinese Standard | A60 | | Classification of International Standard | 17.180 | | Word Count Estimation | 15,183 | | Date of Issue | 2008-03-25 | | Date of Implementation | 2008-06-25 | | Quoted Standard | JJF 1001-1998; JJF 1059-1999; JJF 1071-2000; JJG(YD)040-1998 | | Drafting Organization | Telecommunication Metrology Center of the Ministry of Information Industry | | Administrative Organization | Technical Committee of the National Optical Metrology | | Regulation (derived from) | AQSIQ Announcement No. 35 of 2008 | | Issuing agency(ies) | State Administration of Quality Supervision, Inspection and Quarantine | | Summary | This standard applies to asphalt penetration instrument calibration. |
JJF 1199-2008
Calibration Specification of Optical Attenuator for Telecommunications
People's Republic of China National Metrology Technical Specifications
Communication optical attenuator calibration specification
Posted 2008-03-25
2008-06-25 implementation
The State Administration of Quality Supervision, Inspection and Quarantine released
Communication optical attenuator calibration specification
This specification by the State Administration of Quality Supervision, Inspection and Quarantine approved on March 25, 2008, and from
From June 25, 2008 into effect.
Focal point. the National Technical Committee on Optical metrology
Main drafting unit. Ministry of Information Industry Communications Measurement Center
This specification committee commissioned by the National Optical measurement technology is responsible for interpreting
The main drafters of this specification.
Cycle (Ministry of Information Industry Communications Measurement Center)
Yue Lei (Ministry of Information Industry Communications Measurement Center)
Drafters participate.
Fudong Bo (Ministry of Information Industry Communications Measurement Center)
Zhangying Yan (Ministry of Information Industry Communications Measurement Center)
table of Contents
1 Scope (1)
2. Referenced Documents (1)
3 Overview (1)
4 metering performance requirements (1)
5 calibration conditions (1)
5.1 Environmental conditions (1)
5.2 Calibration Equipment (1)
6 calibration items and calibration methods (2)
6.1 calibration items (2)
6.2 Calibration method (3)
7 Calibration Results (4)
7.1 Indication attenuation optical attenuator calibration process (4)
7.2 Optical Attenuator Attenuation Repeatability calibration process (5)
7.3 insertion loss calibration results processing (5)
7.4 optical attenuation return loss results of the calibration process (option) (5)
8 calibration results expression (5)
9 Recalibration interval (5)
Appendix Table A calibration record format (6)
Appendix B Calibration Certificate page format (7)
Appendix C communication optical attenuator calibration uncertainty evaluation instances (8)
Communication optical attenuator calibration specification
1 Scope
The calibration specification communications optical attenuator common metrological characteristics, calibration methods and calibration equipment used
Equipment requirements, etc., applicable to the first communication optical attenuator calibration, calibration and subsequent in-service inspection. The light fades
Attemperating the type evaluation requirements concerning metrological characteristics may refer to this specification execution. Other instruments with optical attenuation correction function
Quasi also be implemented by reference.
2 Citations
JJF 1001-1998 "Universal metering terminology"
JJF 1059-1999 "Evaluation and Expression of Uncertainty in Measurement"
JJF 1071-2000 "National Calibration Specifications writing rules"
JJG (YD) 040-1998 "optical attenuator"
When using this specification it should be noted that using the currently valid version of the documents cited.
3 Overview
Communication optical attenuator for optical communications industry research and production is an important instrument, it is used to adjust the optical communications
Optical path optical power values, using a calibrated optical attenuator can be used to expand the range of standard optical power range, straight
Access to communication network services. Normal communication optical attenuator can be divided into fixed and variable optical attenuator optical attenuator are two, variable
Optical attenuator can be divided into a continuously variable type, step type, continuous and step combination.
4 metering performance requirements
a) Optical Attenuator Indication. (0 ~ 65) dB;
b) Optical Attenuator Repeatability. 0.8dB;
c) optical attenuator insertion loss. ≤3dB;
d) optical attenuator port return loss. ≥35dB;
e) optical attenuator input and output. optical fiber connector type is recommended for the FC/PC optical connector.
When the index is higher than this requirement instructions to instructions for the performance indicators.
The above technical indicators are not used for determining eligibility, for reference purposes only.
5 calibration conditions
5.1 Environmental conditions
5.1.1 Ambient temperature. (23 ± 5) ℃, relative humidity ≤80%;
5.1.2 Calibration during temperature changes. ± 2 ℃;
5.1.3 Power supply voltage. (220 ± 11) V; frequency. (50 ± 1) Hz;
5.1.4 The laboratory shall be no severe impact and vibration measurements of electromagnetic interference.
5.2 Calibration Equipment
......
|