JG/T 359-2012 English PDF

US$289.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JG/T 359-2012: Aluminum foam plate for building
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
JG/T 359-2012	289	Add to Cart	3 days	Aluminum foam plate for building	Valid

Similar standards

JG/T 125   GB/T 14370   JG/T 402   JGJ/T 359   JG/T 360   JG/T 353   

Basic data

Standard ID: JG/T 359-2012 (JG/T359-2012)
Description (Translated English): Aluminum foam plate for building
Sector / Industry: Building & Construction Industry Standard (Recommended)
Classification of Chinese Standard: Q73
Classification of International Standard: 91.060
Word Count Estimation: 11,138
Quoted Standard: GB/T 1196; GB/T 3190; GB/T 7314-2005; GB 8624-2006; GBJ 88; YB/T 5349-2006
Regulation (derived from): Ministry of Housing and Urban Notice No. 1260; industry standard filing Notice 2013 No. 1 (No. 157 overall)
Issuing agency(ies): Ministry of Housing and Urban-Rural Development of the People's Republic of China
Summary: This standard specifies the architectural aluminum foam terms and definitions, classification and marking, materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to industrial and civ

JG/T 359-2012: Aluminum foam plate for building

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS91.060 Q73 People's Republic of China Construction Industry Standard Building aluminum foam Released on.2012-02-06 2012-08-01 implementation People's Republic of China Ministry of Housing and Urban - Rural Development

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the Institute of Standards and Valuation of the Ministry of Housing and Urban-Rural Development. This standard by the Ministry of housing and urban and rural construction products and structural parts of the product standardization technical committee. This standard is responsible for drafting units. National Building Materials Testing Center. This standard participates in the drafting unit. Beijing Zhongshiye Industry Foam Metal Co., Ltd., Shenyang Kejia New Material Co., Ltd., Shanghai Zhonghui Foam Aluminum Co., Ltd., China Aluminum Qingdao Light Metal Co., Ltd., Changzhou Double European Plate Industry Co., Ltd. The main drafters of this standard. Jiang Quan, Liu Yujun, Liu Tingting, Liu Yi, Zhao Chunzhi, Ma Liping, Liu Yongmin, Qi Zhen. Building aluminum foam

1 Scope

This standard specifies the terms and definitions, classification and marking, materials, requirements, test methods, inspection rules, marking, Packaging, transportation and storage. This standard applies to industrial and civil building noise reduction and decorative use of foam aluminum. Traffic and other uses of foam aluminum plate can refer to use.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, the only dated edition applies to this article The latest version (including all modifications) applies to this document. GB/T 1196 Aluminum ingots for remelting GB/T 3190 Chemical composition of deformed aluminum and aluminum alloys Test method for metallic material compression at room temperature GB/T Classification of Combustion Properties of Building Materials and Products GB/T Code for measurement of sound absorption coefficient and acoustic impedance of GB J88 standing wave tube method Test method for mechanical properties of metal bending YB/T 5349-2006

3 terms and definitions

The following terms and definitions apply to this document. 3.1 Foam aluminum plate aluminumfoamplate A large number of through-holes or closed-cell aluminum or aluminum plates are distributed in the matrix. 3.2 Through-hole foam aluminum plate open-celaluminumfoamplate The pores are interconnected with foamed aluminum plates. 3.3 Closed cell foam aluminum plate closed-celaluminumfoamplate Between the pores are not connected to the foam aluminum plate. 3.4 Compressive strength uppercomperssiveyieldstrength The highest compressive stress before the first drop of the yield of the specimen is the compressive strength. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JG/T 359-2012_English be delivered?

Answer: Upon your order, we will start to translate JG/T 359-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JG/T 359-2012_English with my colleagues?

Answer: Yes. The purchased PDF of JG/T 359-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.