JG/T 124-2017 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JG/T 124-2017: Building hardware for windows and doors--Handles for espagnolette gears
Status: Valid

JG/T 124: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
JG/T 124-2017	259	Add to Cart	3 days	Building hardware for windows and doors--Handles for espagnolette gears	Valid
JG/T 124-2007	239	Add to Cart	3 days	Building hardware for windows and doors. Handles for espagnolette gears	Obsolete
JG/T 124-2000	399	Add to Cart	3 days	Handle of rigid polyvinyl chloride window and door	Obsolete

Similar standards

JG/T 125   GB/T 14370   JG/T 402   JG/T 127   JG/T 126   

Basic data

Standard ID: JG/T 124-2017 (JG/T124-2017)
Description (Translated English): Building hardware for windows and doors--Handles for espagnolette gears
Sector / Industry: Building & Construction Industry Standard (Recommended)
Classification of Chinese Standard: Q73
Classification of International Standard: 91.190
Word Count Estimation: 11,136
Date of Issue: 2017-12-07
Date of Implementation: 2018-06-01
Older Standard (superseded by this standard): JG/T 124-2007
Quoted Standard: GB/T 2828.1; GB/T 5823; GB/T 14436; GB/T 32223
Regulation (derived from): The Ministry of Housing and Urban-Rural Development Announcement No. 1761 of 2017
Issuing agency(ies): Ministry of Housing and Urban-Rural Development of the People's Republic of China
Summary: This standard specifies the classification, marking, requirements, test methods, inspection rules and signs, packaging, transportation, and storage of the handles used in building windows and doors. This standard applies to the construction of doors and windows in conjunction with the transmission lock, multi-point lock, etc. used with the transmission mechanism handle (hereinafter referred to as the handle).

JG/T 124-2017: Building hardware for windows and doors--Handles for espagnolette gears

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Building hardware for windows and doors.Handles for espagnolette gears ICS 91.190 Q73 People's Republic of China Construction Industry Standard Replace JG/T 124-2007 Building door and window hardware transmission mechanism handle Released on.2017-12-07 2018-06-01 implementation Ministry of Housing and Urban-Rural Development

Content

Foreword I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Classification and Marking 1 5 Requirements 2 6 Test method 3 7 Inspection rules 5 8 Marking, packaging, transportation and storage 7

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces JG/T 124-2007 "Hands for Building Door and Window Hardware Transmission Mechanism". This standard is in line with JG/T 124-2007 The main technical content changes are as follows. --- Added terms and definitions with positioning function, without positioning function (see Chapter 3), classification (see 4.1.2), requirements (see 5.4), test Test method (see 6.4); ---Modified the fixed position of the shifting handle of the transmission mechanism to resist the twisting test fork [see 6.4.3.1b)]. This standard was proposed by the Institute of Standardization of the Ministry of Housing and Urban-Rural Development. This standard is under the jurisdiction of the Standardization Technical Committee for Building Products and Components of the Ministry of Housing and Urban-Rural Development. Participated in the drafting of this standard. China Building Metal Structure Association, Chunguang Hardware Co., Ltd., China Academy of Building Research, Sigiriya Aobi Window Door Hardware (Sanhe) Co., Ltd., ASSA ABLOY Guoqiang (Shandong) Hardware Technology Co., Ltd., Zhejiang Xing Samsung Hardware Co., Ltd., Qing Island Lixing Yangshi Door & Window Fittings Co., Ltd., Guangdong Jianlang Hardware Products Co., Ltd., Guangdong Hehe Building Hardware Co., Ltd. House Trading (Shanghai) Co., Ltd., Noto Franck Construction Hardware (Beijing) Co., Ltd., National Building Materials Industry Building Hardware Plumbing Products Volume Supervision and Inspection Center, Beijing Xifei Century Door and Window Curtain Wall Engineering Co., Ltd., Shandong Junqiang Hardware Co., Ltd., Dalian Technology Development Co., Ltd., Guangdong Aolijian Construction Hardware Co., Ltd., Yinke Gated (Zhuhai Free Trade Zone) Co., Ltd., Beijing Milan Window Energy Saving Building Materials Co., Ltd., Jiangxi Fenfa Technology Co., Ltd., Zhejiang Ruide Construction Hardware Co., Ltd., Shenyang Yuanda Aluminum Engineering Co., Ltd. The main drafters of this standard. Liu Xuqiong, Lin Puguang, Lu Dongrui, Wang Liang, Sun Jichao, You Jun, Yuan Zhibing, Du Wanming, Xie Xiaodong, Liang Shilin, Dai Hongliang, Gu Xiuzhi, Yang Jiaxi, Hua Mingjie, Cheng Xiansheng, Chen Yunxiang, Wei Jun, Pan Fu, Chen Ming Tan, Dai Weihong, Xu Changli, Liao Bangyu. The previous versions of the standards replaced by this standard are. ---JG/T 124-2000, JG/T 124-2007.

Introduction

Building Door & Window Hardware contains 12 standards. ---GB/T 32223 General requirements for building doors and windows hardware ---JG/T 124 Construction door and window hardware transmission mechanism handle ---JG/T 125 Building Door & Window Hardware Hinges (Hinges) ---JG/T 126 Building Door and Window Hardware Drive Locker ---JG/T 127 Building door and window hardware sliding support ---JG/T 128 Building door and window hardware support ---JG/T 129 Building door and window hardware pulley ---JG/T 130 Building door and window hardware single point lock ---JG/T 213 Building door and window hardware spinning handle ---JG/T 214 Building Door and Window Hardware Latch ---JG/T 215 Building Door and Window Hardware Multi-Point Locker ---JG/T 393 Building door and window hardware double-sided handle Building door and window hardware transmission mechanism handle

1 Scope

This standard specifies the classification and marking, requirements, test methods, inspection rules and signs, packaging, and transportation of the handles for building doors and windows. Loss and storage. This standard is applicable to the transmission mechanism handles used in conjunction with transmission lockers and multi-point lockers in building doors and windows (hereinafter referred to as the implementation). hand).

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2828.1. Sampling and sampling procedures - Part 1 . Batch-to-batch sampling plan searched by the acceptance quality limit (AQL) GB/T 5823 building door and window terminology GB/T 14436 Industrial Product Assurance Document GB/T 32223 General requirements for building doors and windows hardware

3 Terms and definitions

The following terms and definitions as defined in GB/T 5823 and GB/T 32223 apply to this document. 3.1 Handlewithclickmechanism with positioning function During the rotation, the handle of the positioning function is set at a specific position. 3.2 Handle withoutoutclickmechanism without positioning During the rotation, there is no handle to set the positioning function.

4 Classification and marking

4.1 Classification and code 4.1.1 The structure name code is divided into. a) square shaft insert type handle, codenamed FZ; b) Fork-input handle, codenamed BZ. 4.1.2 Divided into two categories by function. a) with positioning function, code DD; b) Without positioning function, codenamed BD. 4.1.3 Main parameter code. a) Handle base width. marked with actual size (mm) (see Figure 1, B); b) Square shaft (or fork) length. marked with actual size (mm) (see Figure 1, h). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JG/T 124-2017_English be delivered?

Answer: Upon your order, we will start to translate JG/T 124-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JG/T 124-2017_English with my colleagues?

Answer: Yes. The purchased PDF of JG/T 124-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JG/T 124-2017?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JG/T 124-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.