HYT099-2007 English PDFUS$549.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. HYT099-2007: Test method of seawater nutrients analyzer Status: Valid
Basic dataStandard ID: HY/T 099-2007 (HY/T099-2007)Description (Translated English): Test method of seawater nutrients analyzer Sector / Industry: Marine Industry Standard (Recommended) Classification of Chinese Standard: N92 Classification of International Standard: 7.06 Word Count Estimation: 17,113 Date of Issue: 12/19/2007 Date of Implementation: 1/1/2008 Issuing agency(ies): State Oceanic Administration Summary: This standard specifies the seawater nutrients meter test items, test equipment, testing environmental conditions, the detection method to detect and report writing requirements. This standard applies to seawater nutrients automatic meter underwater detection of long-term use. HYT099-2007: Test method of seawater nutrients analyzer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Test method of seawater nutrients analyzer ICS 07.060 N92 People's Republic of China Marine Industry Standard HY/T 09-2007 Testing method of seawater nutrient salt meter 2007-12-19 released Implementation of.2008-01-01 Issued by the State Oceanic Administration ForewordAppendix A of this standard is a normative appendix, and Appendix B and Appendix C are informative appendices. This standard was proposed by the National Oceanic Standards and Metrology Center. This standard is under the jurisdiction of the National Marine Standardization Technical Committee (SAC/TC283). Drafting organization of this standard. National Marine Standard Metrology Center. The main drafters of this standard. Wang Aijun, Wang Cong, Gao Zhanke, Sui Jun, Li Mingzhao. HY/T 09-2007 Testing method of seawater nutrient salt meter1 scopeThis standard specifies the testing items, testing equipment, testing environmental conditions, and testing methods of seawater nutrient salt measuring instruments (hereinafter referred to as instruments) And the requirements for the preparation of test reports. This standard applies to the detection of seawater nutrient salt automatic measuring instruments used for a long time underwater.2 Normative referencesThe clauses in the following documents become clauses of this standard after being quoted. For dated reference documents, all subsequent Amendments (not including errata content) or revisions do not apply to this standard. However, all parties that have reached an agreement based on this standard are encouraged to study Is the latest version of these files available? For undated references, the latest version is applicable to this standard. HY 016.2 Basic environmental test methods for marine instruments Low temperature test HY 016.3 Basic environmental test methods for marine instruments Low temperature storage test HY 016.4 Basic environmental test methods for marine instruments, high temperature test HY 016.5 Basic environmental test methods for marine instruments, high temperature storage test HY 016.8 Basic environmental test methods for marine instruments Alternating damp heat test HY 016.11 Basic environmental test methods for marine instruments Vibration test HY 016.12 Basic environmental test methods for marine instruments Impact test HY 016.13 Basic environmental test method for marine instruments Continuous impact test HY 016.14 Basic environmental test methods for marine instruments Tilt and roll test HY 016.15 Basic environmental test methods for marine instruments Hydrostatic pressure test3 Terms and definitionsThe following terms and definitions apply to this standard. It is suitable for marine field survey, can automatically carry out sample injection, chemical reaction, detection, analysis and test of nutrients in seawater instrument. Note. Rewrite HY/T 093-2005 and define 3.2.4 Technical requirements4.1 Appearance The appearance requirements of the instrument are as follows. a) The paint and coating of the outer shell and surface of the instrument should be uniform in color, smooth and firm, and there should be no obvious scratches, rust, leaks, or cracks. And blistering phenomenon; b) The lead connection of the instrument should be reliable, and the fasteners and connectors should not be loose. 4.2 Measurement performance The instrument measurement performance requirements are shown in Table 1. HY/T 09-2007 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HYT099-2007_English be delivered?Answer: Upon your order, we will start to translate HYT099-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of HYT099-2007_English with my colleagues?Answer: Yes. The purchased PDF of HYT099-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
