HJ 863.3-2017 English PDFUS$829.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. HJ 863.3-2017: Technical specification for application and issuance of pollutant permit non-ferrous metal metallurgy industry - copper smelting Status: Valid
Basic dataStandard ID: HJ 863.3-2017 (HJ863.3-2017)Description (Translated English): Technical specification for application and issuance of pollutant permit non-ferrous metal metallurgy industry - copper smelting Sector / Industry: Environmental Protection Industry Standard Classification of Chinese Standard: Z00 Word Count Estimation: 36,382 Date of Issue: 2017-09-29 Date of Implementation: 2017-09-29 Regulation (derived from): Ministry of Environmental Protection Bulletin 2017 No. 54 Issuing agency(ies): Ministry of Ecology and Environment HJ 863.3-2017: Technical specification for application and issuance of pollutant permit non-ferrous metal metallurgy industry - copper smelting---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. People's Republic of China national environmental protection standards Technical specification for application and issuance of pollutant permit non-ferrous metal metallurgy industry-copper smelting 2017-09-29 Posted 2017-09-29 Implementation Ministry of Environmental Protection released Directory Foreword ii 1 Scope 1 2 Normative references 1 3 Terms and definitions .2 4 sewage units fill in the basic conditions required .2 5 emission nodes corresponding to the discharge port and allowable emission limits .7 6 pollution prevention and control of viable technical requirements .11 7 Self-monitoring management requirements 12 8 Environmental Management Ledger Records and Permit Permit Implementation Report Preparation Requirements 16 9 Actual emissions accounting method ..20 10 Compliance Decision Method 22 Appendix A (Informative) Environmental Management Ledger Records Refer to Table 25 Appendix B (Informative) Manual Monitoring Report Examples Table Appendix C (informative) Copper smelting sewage disposal units permit implementation of the report preparation 34 ForewordIn order to implement the "Law of the People's Republic of China on Environmental Protection", "Law of the People's Republic of China on Prevention and Control of Atmospheric Pollution", "Medium Law of the People's Republic of China on Prevention and Control of Water Pollution "and other laws and regulations as well as the" Control of pollutant discharge permit system implementation plan notice " No [2016] No. 81), improve the technical support system of sewage discharge permit, guide and standardize the sewage discharge permit of copper smelting sewage units Application and certification work permit, the development of this standard. This standard specifies the basic situation of application and issuance of emission permits issued by copper smelting and discharging units, and the permissible emission limit Value determination and actual emissions accounting methods, compliance assessment methods and self-monitoring, environmental management, accounting and sewage permit implementation Line reports and other environmental management requirements, put forward copper smelting industry pollution prevention and control technology and operational management requirements. When the issuance of the permit for the issuance of sewage is issued by the issuing authority, if it is located in the area prohibited by the laws and regulations from the construction area, The copper smelting sewerage units or production units that the local governments explicitly stipulate to be eliminated or banned shall not issue the sewerage permit. This standard Appendix A, Appendix B, Appendix C is an informative annex. This standard is released for the first time. This standard is formulated by the Ministry of Environmental Protection Planning and Finance Department, Ministry of Environmental Protection Science and Technology Standards Division. This standard is mainly drafted by. China Academy of Environmental Sciences, Central South University, Environmental Protection Department of Environmental Protection of Foreign Cooperation Center, China Nonferrous Metals Industry Association, MEP Environmental Engineering Assessment Center. This standard MEP approved on September 29,.2017. This standard since September 29,.2017 come into operation. This standard is interpreted by the MEP. Sewage Permit Application and Issuance Technical Specifications Nonferrous Metal Industry - Copper Smelting1 scope of applicationThis standard specifies the copper smelting sewage units permit application and issuance of the basic conditions for reporting requirements, allowable emission limits Settlement, actual emissions accounting, compliance assessment methods and self-monitoring, environmental management, accounting and sewage permit implementation of the report such as ring Environmental management requirements, put forward the copper smelting sewage unit pollution control feasible technical requirements. This standard applies to guide the copper smelting sewage units to fill out the "sewage permit application form" and in the national sewage permit management information Platform reporting system to fill in the relevant application information for the guidance of the issuing authority to determine the copper smelting sewage discharge permits permit May request. This standard applies to primary ore or copper concentrate as the main raw material of copper smelting sewage units, excluding scrap copper material as raw material Smelting of pollutants emitted by the pollutant discharge units and water pollutant discharge permit management. This standard does not make provisions but the discharge of industrial wastewater, waste gas or the state of toxic and harmful atmospheric pollutants of copper smelting sewage Other pollutant discharge facilities and discharge outlets of the unit shall be implemented in accordance with the General Provisions of the Technical Specifications for the Application and Issuance of Permits for Sewage Discharges, Certificate Application and Issuance of Technical Specifications Boiler Industry "Before the release of hot water boilers and steam boilers of 65 t/h and below, the implementation of this standard, After the release from its provisions.2 Normative referencesThe contents of this standard reference the following documents or terms. For undated references, the effective version applies This standard. GB 13271 Boiler air pollutant emission standards GB 25467 copper, nickel, cobalt industrial pollutant emission standards Determination of Particulate Matter and Gaseous Pollutants in Exhaust of Fixed Pollution Sources GB/T 16157 HJ 493 Technical Specifications for the Preservation and Management of Water Sampling Samples HJ 494 water sampling technical guidance HJ 495 water quality sampling program design specifications HJ 819 Technical Guidelines for Self-Monitoring of Sewage Disposal Units General HJ 820 Self-Monitoring Technical Guidelines for Sewage Disposal Units Thermal Power Generation and Boilers HJ/T 55 Guidelines for Unorganized Emissions Monitoring of Air Pollutants HJ/T 75 Stationary Pollutant Source Discharge Continuous Monitoring Technical Specifications (Trial Implementation) HJ/T 76 Fixed Pollutant Source Discharge Continuous Monitoring System Technical Requirements and Monitoring Methods (Trial) HJ/T 91 Technical Specifications for Surface Water and Sewerage Monitoring HJ/T 353 water pollution source on-line monitoring system installation technical specifications (Trial) HJ/T 354 water pollution source on-line monitoring system acceptance Technical Specifications (Trial) HJ/T 355 water pollution source on-line monitoring system operation and evaluation of technical specifications (Trial) HJ/T 356 Water Pollution Source Online Monitoring System Data Validation Technical Specifications (Trial) HJ/T 397 fixed source exhaust gas monitoring technical specifications3 Terms and definitionsThe following terms and definitions apply to this standard. 3.1 Copper smelting pollutant emission unit unit Refers to the primary ore or copper concentrate as the main raw material of copper smelting enterprises, does not include the use of scrap copper raw materials for the renewable smelting enterprises. 3.2 Permitted emission limits permitted emission limits Refers to the allowable pollutants discharged by pollutant discharge units as specified in the discharge permit and the maximum discharge concentration and the maximum discharge amount. 3.3 special periods special periods Refers to the national and local deadlines according to the planning and other relevant environmental management regulations, the pollutant discharge units have Special requirements of the period, including heavy polluted weather during the period and winter prevention period and so on.4 sewage units fill in the basic requirements4.1 General principles Sewage units should be in accordance with the requirements of this standard, in the sewage permit management information platform to declare the system to fill in the "sewage permit application form" In the corresponding information table. Fill in the system drop-down menu does not include the provisions of the local environmental protection departments need to fill in or sewage Units that need to fill in the report, you can add content. Provincial environmental protection department in accordance with the requirements of improving the quality of the management of environmental requirements should be filled in the sewage permit management information Ping Taiwan declaration system "with the nuclear power of local environmental protection departments to increase the management content" column. When reporting the application information, the pollutant discharge unit should assess the status of pollution discharge and environmental management and put forward rectification measures on the current environmental problems Shi, and fill in the sewage permit management information platform to declare the system "corrective measures" column. The basic situation of the sewage disposal units should be reported according to the actual conditions and bear legal responsibility for the authenticity, legality and completeness of the application materials submitted. 4.2 sewage unit basic information The basic information of the pollutant discharge unit should fill in the name of the unit, the zip code, whether it is put into production, the date of production, the center of production and operation center Degree, latitude and longitude of the place of production and operation, whether the locality belongs to the key area, whether there is an EIA approval document and number, Party government on the identification of illegal items or filing documents and symbols, whether the total amount of major pollutants distribution plan documents and symbols, particles Total amount of indicators (t/a), total sulfur dioxide indicators (t/a), total nitrogen oxides (as NO2) indicators (t/a) Total oxygen content (t/a), ammonia total nitrogen (t/a), total lead and its compounds (t/a), total arsenic and its compounds (T/a), total mercury and its compounds (t/a), total cadmium and its compounds (t/a), total lead Total arsenic total indicator (t/a), total mercury total indicator (t/a), total cadmium total indicator (t/a), the remaining (if any) Supplementary reporting. 4.3 main products and capacity 4.3.1 General requirements In reporting the main products and production capacity, should choose "copper smelting." Sewage disposal units should fill out the requirements of this standard to apply for the main production unit of the information system of sewage discharge permit management information platform, To process, production facilities, production facilities number, facility parameters, product name, production capacity and measurement units, the design of the production time Room and other options and other information. 4.3.2 The main production unit The main production units are required, the specific classification is as follows. a) fire process. preparation, smelting, blowing, fire refining, electrolytic refining, slag beneficiation, flue gas acid, public units, etc .; b) wet process. preparation, crushing, building piles, leaching, extraction, electrowinning, slag heap treatment, public units and so on. 4.3.3 The main process The main process is required, the specific requirements are as follows. a) fire process. including smelting, blowing, refining (fire and wet) process; Smelting. Divided into flash melting, oxygen-rich bottom blowing, oxygen-rich top blowing, oxygen-rich side blowing, synthetic furnace smelting and other oxygen-rich molten pool melting or rich Oxygen float smelting process. Blowing. converter, flash, top-blown immersion, the end of blowing, blowing and other blowing process side; Fire refining. divided into refining and tilting furnace refining refining refining process; wet refining mainly electrolytic refining; b) wet process. leaching - extraction - plot, heap leaching - extraction - plot and other technology. 4.3.4 Production facilities Production facilities are divided into required and optional items, the specific requirements are as follows. a) fire process. Required items for the preparation process (including raw material storage, transfer stations, crushing machines, etc.), smelting (flash furnace, top blowing Furnace, side blowing furnace, bottom blowing furnace), blowing (converter, copper matte hot stove - flash blowing furnace, bottom blowing furnace, top blowing furnace, side blowing furnace) Fire refining (anode furnace, disc casting machine), electrolytic refining (electrolyzer, electrolyte circulation tank, circulation tank), flue gas acid Towers, conversion towers, absorption towers), utilities (including chemical water treatment stations, boiler rooms, anode mud storage rooms, etc.), optional Including dry kilns, waste heat boilers and power generation systems; b) wet process. required items for the preparation process (including raw material storage, transfer stations, crushing machines, etc.), leaching (leaching tank), extraction Take - stripping (extraction tank, stripping tank, etc.) and electrowinning system (electrowinning tank, copper electrowinning tank, etc.), optional items include the preparation of dry Dry kiln; c) This standard has not yet provided for, and emissions of industrial emissions and toxic and hazardous air pollutants, a clear national and local emission standards Quasi, the corresponding production facilities are required. 4.3.5 Production Facilities Number Production facilities number is required, the specific requirements are as follows. a) If the production facility has the internal production facility number of the sewage disposal unit, fill in the corresponding number; b) If the production facilities have no internal production facilities number of sewage disposal units, then according to "on the development of thermal power, paper industry and Beijing-Tianjin-Hebei test Appendix 4 "Fixed Pollution Sources (Water, Atmosphere) Coding Rules in Notice on the Management of Urban Peril Source Discharge Permit Line) "number and fill in. 4.3.6 Facilities parameters Facilities parameters are divided into required and optional items, the specific requirements are as follows. Production facilities in smelting furnace, blowing furnace, anode furnace and other furnaces, processing capacity, the common unit of the boiler capacity, the original Library storage capacity, auxiliary system processing (storage) capacity is required, the other optional. 4.3.7 Product Name The product name is required, divided into. blister copper, copper anode, copper cathode, sulfuric acid and so on. 4.3.8 production capacity and measurement units Production capacity and measurement units are required, the production capacity of the main product design capacity. Capacity and yield measurement units are million t/a. 4.3.9 Design Year of production Design annual production time is required, should be based on the environmental impact assessment documents and approval or local government identified or prepared for non-compliance items Case file to determine the number of hours of production to complete. 4.3.10 Others Other optional items, sewage units need to explain the contents, you can fill in. 4.4 The main raw and auxiliary materials and fuel The main raw and auxiliary materials and fuel fill in the contents include the type of raw and auxiliary materials, raw and auxiliary materials, fuel name, fuel into Points, design annual usage, other, specific requirements are as follows. a) types. divided into raw and auxiliary materials, fuel; - 5 - b) raw and auxiliary material name. raw materials, including primary ore, copper concentrate, copper scrap and so on. Accessories include flux (quartz, limestone), Refining slag, soot, refining slag, slag concentrate, etc. c) Composition of raw and auxiliary materials. the proportion of sulfur elements (dry basis) of the main raw and auxiliary materials, as well as the major toxic and harmful substances, accounting for the proportion; d) Name of fuel. natural gas, heavy oil, coal, etc .; e) Fuel composition. The sulfur content (dry basis), ash content and major toxic and hazardous substances in the main fuels should be reported, accounting for ratio; f) Design annual usage. The designed annual usage is the annual consumption of raw and auxiliary materials and fuel matching the approved production capacity, in units of 10,000 t/a or 10,000 m3/a; g) Others. If the pollutant discharge unit needs to explain the content, can fill in; h) above a) - f) is required, g) is optional. 4.5 production of sewage nodes, pollutants and pollution control facilities 4.5.1 General principles Waste gas production node, pollutants and pollution control facilities, including the corresponding name of the pollutant production section, the type of pollutants, emission forms (with Organization, unorganized), pollution control facilities, whether it is viable technology, organized discharge number, whether the discharge port settings meet the requirements Seeking, discharge type. Wastewater pollutant discharge nodes, pollutants and pollution control facilities, including wastewater types, types of pollutants, whereabouts of emissions, emission laws, Pollution control facilities, discharge number, the discharge port set to meet the requirements, the type of discharge. 4.5.2 Exhaust gas 4.5.2.1 pollution production process Divided into raw material preparation, smelting, blowing, fire refining, flue gas acid, electrolysis, electricity, net liquid. 4.5.2.2 types of pollutants Pollutants should be based on GB 13271, GB 25467 to determine, see Table 1. There are local emission standards, according to local emission standards Accurate set. 4.5.2.3 pollution control facilities The name of the management facilities should be completed dust removal facilities, desulfurization facilities, denitrification facilities. 4.5.2.4 pollution control process Pollution control process Fill dust treatment facilities (wet dust removal, cyclone dust removal, electric dust removal, bag dust removal, etc.), desulfurization Facility management techniques (lime/limestone-gypsum method, organic solution cyclic absorption method, metal oxide absorption method, activated coke adsorption method, Ammonia, double alkali, hydrogen peroxide desulfurization, etc.), denitration facilities governance process (SCR, SNCR, etc.). - 6 - 4.5.3 Wastewater 4.5.3.1 Category Wastewater fill categories include production wastewater (acid, acid wastewater, general production wastewater, etc.), the initial rainwater and domestic sewage. 4.5.3.2 types of pollutants The type of pollutants should be determined according to GB 25467, see Table 1. Where there is a local emission standard, it should be determined according to local emission standards. 4.5.3.3 governance facilities Should fill in domestic sewage treatment facilities, production wastewater treatment facilities. 4.5.3.4 pollution control process Pollution control processes include the production of waste water treatment process (lime and high-density mud method, curing method, lime - iron salt (aluminum Salt), biological agents, electrochemical met......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HJ 863.3-2017_English be delivered?Answer: Upon your order, we will start to translate HJ 863.3-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of HJ 863.3-2017_English with my colleagues?Answer: Yes. The purchased PDF of HJ 863.3-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
