HJ 2550-2018 English PDF

US$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
HJ 2550-2018: Technical requirement for environmental labeling products - Disinfecting tableware cabinet
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
HJ 2550-2018	219	Add to Cart	3 days	Technical requirement for environmental labeling products - Disinfecting tableware cabinet	Valid

Similar standards

GB/T 3606   QB/T 2421   QB/T 1622.8   

Basic data

Standard ID: HJ 2550-2018 (HJ2550-2018)
Description (Translated English): Technical requirement for environmental labeling products - Disinfecting tableware cabinet
Sector / Industry: Environmental Protection Industry Standard
Classification of Chinese Standard: Y68
Word Count Estimation: 9,941
Date of Issue: 2018-07-12
Date of Implementation: 2018-10-01
Regulation (derived from): Ministry of Ecology and Environment Announcement No. 19 of 2018
Issuing agency(ies): Ministry of Ecology and Environment

HJ 2550-2018: Technical requirement for environmental labeling products - Disinfecting tableware cabinet

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical requirement for environmental labeling products - Disinfecting tableware cabinet National Environmental Protection Standard of the People's Republic Environmental labeling product technical requirements Technical requirement for environmental labeling products -Disinfecting tableware cabinet Published on.2018-07-12 2018-10-01 Implementation Ministry of Ecology and Environment released

Content

Foreword..III 1 Scope 1 2 Normative references 1 3 Terms and Definitions..1 4 Basic requirements 2 5 Technical content 2 6 Test Method 4 Appendix A (Normative Appendix) Phthalates..5 Appendix B (Normative) Polycyclic Aromatic Hydrocarbons (PAHs)..6

Foreword

In order to implement the Environmental Protection Law of the People's Republic of China, reduce the environment for the production, use and recycling of utensil disinfection cabinets. And the impact of human health, the development of this standard. This standard proposes a ring for the environmental design, production, use, reuse, packaging, recycling and product description of the utensil disinfection cabinet. Environmental protection requirements. This standard is the first release. This standard was formulated by the Science and Technology Standards Department of the Ministry of Ecology and Environment. This standard is mainly drafted by. China-Japan Friendship Environmental Protection Center, Ningbo Product Quality Supervision and Inspection Institute. This standard is approved by the Ministry of Ecology and Environment on July 12,.2018. This standard has been implemented since October 1,.2018. This standard is explained by the Ministry of Ecology and Environment. Environmental labeling product technical requirements

1 Scope of application

This standard specifies the terms and definitions, basic requirements, technical contents and inspection methods of environmental labeling products for food disinfection cabinets. This standard applies to household and similar use utensils disinfection cabinets. This standard does not apply to. -- Disinfection cabinets that are only sterilized by ultraviolet radiation; -- Other disinfection cabinets that do not use utensils for disinfection, such as towel disinfection cabinets; -- Disinfection cabinet for medical use.

2 Normative references

The contents of this standard refer to the terms in the following documents. For undated references, the latest edition applies to this standard. GB 17988 Food and Beverage Disinfection Cabinet Safety and Hygienic Requirements GB/T 16288 logo for plastic products GB/T 18455 packaging recycling mark GB/T 23685 General technical requirements for recycling of waste electrical and electronic products GB/T 26572 Limit requirements for restricted substances in electrical and electronic products GB/T 29784.2 Determination of polycyclic aromatic hydrocarbons - Part 2. Gas chromatography - mass spectro GB/T 29786 Determination of phthalates in electrical and electronic products - Gas chromatography - mass spectrometry GB/T 32355.2 Evaluation of the recyclability of electric and electronic products - Part 2. Washing machines, televisions and microcomputers GB/T 35758 household appliance standby power measurement method HJ 2537 Environmental Labeling Product Technical Requirements Waterborne Coatings

3 Terms and definitions

The following terms and definitions apply to this standard. 3.1 Disinfecting of tableware Kill or remove residual pathogenic microorganisms from cleaned natural utensils to achieve harmless treatment. [GB 17988-2008, definition 3.101] 3.2 Disinfecting tableware cabinet Appropriate volume and equipment, using physical, chemical or a combination of both to disinfect utensils. It has a place to place utensils One or more compartments. [GB 17988-2008, definition 3.102] 3.3 Recycling rate recycling rate The sum of the mass of the reusable part and the recycled part (excluding the energy recovery part) expected in the electrical and electronic products The percentage of total mass of electrical and electronic products. [GB/T 32355.2-2015, definition 3.1] 3.4 Shutdown mode off made When the product's power supply is connected to the mains, no standby mode, network mode, or active mode appears, and any Product model. Only the indicator that the user's product is in the shutdown position is included in the category of the shutdown mode. [GB/T 35758 -2017, definition 3.5] 3.5 standby mode standby mode The energy-using appliance provides one or more of the following user-oriented or protection functions when connected to the main power source, and is continuous for any Product model. -- Other modes (including active) can be triggered by triggering remote switches (including remote control), internal sensors, and timers Mode is on or off); -- Continuous function. information or status display including the clock; -- Continuous function. sensor based function [GB/T 35758-2017, definition 3.6]

4 basic requirements

4.1 The product should meet the requirements of the corresponding quality, safety and hygiene standards. 4.2 Pollutant emissions from product manufacturing enterprises shall comply with national and local standards for pollutant discharge. 4.3 Product manufacturers should strengthen clean production in the production process.

5 Technical content

5.1 Product Environmental Design Requirements 5.1.1 Easy to recycle design 5.1.1.1 The product recyclability should be no less than 75%. 5.1.1.2 Plastic parts with a mass greater than 25g or a surface area exceeding.200mm2 shall be marked in accordance with the requirements of GB/T 16288. 5.1.2 Restricted/disabled substance requirements 5.1.2.1 Lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr6), polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in products The content should meet the requirements of GB/T 26572. 5.1.2.2 Products with UV disinfection function, the mercury content in the UV lamp used is not more than 15mg per lamp. 5.1.2.3 The product shell, the substrate of the circuit board, and the power cord do not use short-chained chlorinated paraffins (SCCPs), and the content should be no more than the plastic zero. 0.1% of the total parts. 5.1.2.4 Except for sealing parts, plastic parts with a mass greater than 25g do not use chlorine-containing polymers; do not contain tris(2-chloroethyl) Ester (TCEP), tris(2-chloropropyl) phosphate (TCPP), tris(2,3-dichloropropyl) phosphate (TDCP) and hexabromocyclohexane A flame retardant for dodecane. 5.1.2.5 Except for the power cord, the phthalate esters listed in Appendix A are not used in plastic parts with a mass greater than 25g. More than 1000mg/kg. 5.1.2.6 The maximum allowable limit of benzo[a]pyrene in the product casing, buttons and power cord is 20 mg/kg, and the sixteen items listed in Appendix B The total amount of cyclic aromatic hydrocarbons (PAHs) does not exceed.200 mg/kg. 5.1.2.7 The product does not use hydrochlorofluorocarbons (HCFCs) as blowing agents. 5.1.3 The coating used in the product shall meet the requirements of the anti-corrosion coating in HJ 2537. 5.2 Product production process requirements 5.2.1 No use of hydrochlorofluorocarbons (HCFCs), 1,1,1-trichloroethane (C2H3Cl3), dichloroethane (CH3CHCl2), trichloroethylene (C2HCl3), carbon tetrachloride (CCl4), chloroform (CHCl3), dichloromethane (CH2Cl2), bromopropane (C3H7Br), toluene (C7H8), xylene (C6H4(CH3)2) as a cleaning solvent. 5.2.2 Welding during assembly and joining process shall be carried out by lead-free soldering. 5.3 Product requirements 5.3.1 The disinfection effect of at least one chamber of the product should meet the two-star requirement of GB 17988. 5.3.2 For products with ozone disinfection function, the average ozone leakage during the whole ozone disinfection cycle is not more than 0.16mg/m3. 5.3.3 The shutdown power and standby power of the product shall comply with the requirements of Table 1. Table 1 Product shutdown power, standby power Project limit/W Shutdown mode ≤0.5 Standby mode Status display ≤1 Stateless display ≤0.5 5.4 Product packaging requirements 5.4.1 The total amount of heavy metals such as lead, cadmium, mercury and hexavalent chromium in packaging and packaging materials shall not exceed 100 mg/kg. 5.4.2 Product packaging should be marked according to GB/T 18455. 5.4.3 Recyclable packaging materials should be used. 5.5 Product Description Requirements The product description shall be delivered to the user together with the product, and shall meet the requirements of the GB 17988 product description at the same time. Prompt description of product recycling process. Among them, the treatment, disposal and recycling of mercury in the product UV lamp conform to GB/T 23685 Requirements.

6 Test methods

6.1 Technical content The calculation of 5.1.1.1 is carried out in accordance with the method specified in Chapter 4 of GB/T 32355.2-2015. 6.2 Technical content 5.1.2.1 The test shall be carried out in accordance with the method specified in Chapter 5 of GB/T 26572. 6.3 Technical content The detection of 5.1.2.5 is carried out in accordance with the method specified in GB/T 29786-2013. 6.4 Technical content The detection of 5.1.2.6 is carried out in accordance with the method specified in GB/T 29784.2-2013. 6.5 Technical content 5.3.1, 5.3.2 detection according to the method specified in GB 17988-2008. 6.6 Technical content 5.3.3 is tested in accordance with the method specified in GB/T 35758-2017. 6.7 Other requirements for technical content are verified by document review in conjunction with on-site inspections.

Appendix A

(normative appendix) Phthalate Chinese name English name abbreviation CAS number Dibutylphthalate DBP 84-74-2 Di-(2-ethylhexy)-phthalate DEHP 117-81-7 Butylbenzylphthalate BBP 85-68-7 Di-iso-butyl-phthalate DIBP 84-69-5

Appendix B

(normative appendix) Polycyclic aromatic hydrocarbons (PAHs) Chinese name English name CAS number Benzo[a]芘Benzo[a]pyrene 50-32-8 苊Acenaphthene 83-32-9 Terpenes Acenaphthylene 208-96-8 蒽Anthracene 120-12-7 Benzo[a]蒽Benzo[a]anthracene 56-55-3 Benzo[b]fluoranthene Benzo[b]fluoranthene 205-99-2 Benzo[g,h,i]苝 (perylene) Benzo[ghi]perylene 191-24-2 Benzo[k]fluoranthene Benzo[k]fluoranthene 207-08-9 䓛(1,2-benzophenanthrene) Chrysene 218-01-9 Dibenzo(a,h)蒽Dibenz[a,h]anthracene 53-70-3 Fluoranthene Fluoranthene 206-44-0 芴Fluorene 86-73-7 茚[1,2,3-c,d]芘Indeno[1,2,3-cd]pyrene 193-39-5 Naphthalene Naphthalene 91-20-3 Philippine Phenanthrene 85-01-8 芘Pyrene 129-00-0 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of HJ 2550-2018_English be delivered?

Answer: Upon your order, we will start to translate HJ 2550-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of HJ 2550-2018_English with my colleagues?

Answer: Yes. The purchased PDF of HJ 2550-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.