HJ 2517-2012 English PDFUS$319.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. HJ 2517-2012: Technical requirement for environmental labeling products. Scanner Status: Valid
Basic dataStandard ID: HJ 2517-2012 (HJ2517-2012)Description (Translated English): Technical requirement for environmental labeling products. Scanner Sector / Industry: Environmental Protection Industry Standard Classification of Chinese Standard: Y54 Classification of International Standard: 35.260.10 Word Count Estimation: 12,148 Quoted Standard: GB 4943; GB 9254; GB 17625.1; GB/T 16288; GB/T 18313-2001; GB/T 18455; GB/T 26572; HJ/T 238; HJ/T 239; JB/T 6872 Regulation (derived from): Department of Environmental Protection Notice 2012 No. 38; Issuing agency(ies): Ministry of Ecology and Environment Summary: This standard specifies the scanner environmental labeling products of terms and definitions, basic requirements, technical contents and test method. This standard applies to all types of scanners. This standard does not apply to other devices with scanni HJ 2517-2012: Technical requirement for environmental labeling products. Scanner---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Technical requirement for environmental labeling products.Scanner National Environmental Protection Standard of the People's Republic Environmental Labeling Product Technical Requirements Scanner Technical requirement for environmental labeling products Scanner Published on July 7,.2012 2012-10- 1 Implementation Ministry of Environmental Protection released ContentForeword..4 1 Scope..5 2 Normative references..5 3 Terms and Definitions.5 4 Basic requirements..6 5 Technical content..6 6 Inspection method..8 Appendix A (Normative Appendix) Product Sleep State Power, Preset Delay Time for Sleep, and Standby Power Inspection procedure 9 Appendix B (Normative) banned phthalate.10ForewordTo implement the Environmental Protection Law of the People's Republic of China, reduce the impact of scanners on the environment and human health during production and use. To protect the quality of the environment and protect human health, this standard has been formulated. This standard applies to the environmental protection design, production stage, and use phase of the scanner, energy consumption and noise, recycling stage, packaging and use. The instructions put forward the requirements. This standard refers to the US Energy Star "Imaging Equipment "Energy Star" project requirements (version 1.1), the German Blue Angel "attachment Printed office equipment (RAL-UZ 122,.2008) and Taiwan environmental label TWECO88 and other standards, combined with China's production enterprises The status quo is being developed. This standard is the first release. This standard applies to China Environmental Labeling Product Certification and China Environmental Labeling Low Carbon Product Certification. This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection. This standard is mainly drafted by. China-Japan Friendship Environmental Protection Center, National Office Equipment and Consumables Quality Supervision and Inspection Center, China Cultural Office Equipment Manufacturing Industry Association, Beijing Green Business Culture Development Center, Shandong New Beiyang Information Technology Co., Ltd., Ke Electronic (Shanghai) Co., Ltd., Nanyang Shoukong Optoelectronics Co., Ltd., Avenue Computer Technology (Shanghai) Co., Ltd. This standard was approved by the Ministry of Environmental Protection on July 3,.2012. This standard has been implemented since October 1,.2012. This standard is explained by the Ministry of Environmental Protection. Environmental Labeling Product Technical Requirements Scanner1 Scope of applicationThis standard specifies the terms and definitions, basic requirements, technical content and testing methods of scanner-based environmental labeling products. This standard applies to all types of scanners. This standard does not apply to other devices that have a scanning function.2 Normative referencesThe contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard. GB 4943 Security of information technology equipment GB 9254 Radio disturbance limits and methods of measurement for information technology equipment GB 17625.1 Electromagnetic compatibility limit harmonic current emission limit (device input current per phase ≤ 16A) GB/T 16288 logo for plastic products GB/T 18313-2001 Measurement of airborne noise of acoustic information technology equipment and communication equipment GB/T 18455 packaging recycling mark GB/T 26572 Limit requirements for restricted substances in electrical and electronic products HJ/T 238 Environmental Labeling Product Technical Requirements Rechargeable Battery HJ/T 239 Environmental Labeling Product Technical Requirements Dry Battery JB/T 6872 Developer (Toner) Consumption Test Version A4 for Electrostatic Copier3 Terms and definitionsThe following terms and definitions apply to this standard. 3.1 scanner scanner A digital device for acquiring an image signal, wherein the acquired image file can be edited and stored by a computer or the like, or Display or print through the relevant output device. 3.2 sleep state sleep mode After the product has stopped running for a period of time, it automatically enters a state of low energy consumption without shutting down. 3.3 The default time to enter sleep state default time to sleep mode The time when the product preset by the manufacturer enters the sleep state after completing the basic function. 3.4 Standby mode standby mode The product is connected to the grid with the lowest power state. Note 1. This state can last for an infinite amount of time, and the user cannot change the power of the product in this state. 3.5 scan speed scan speed The number of originals scanned per unit time. The unit uses the number of pages scanned per minute (PPM). This standard is indicated by the letter V.4 basic requirements4.1 Product quality should meet the requirements of the corresponding product quality standards; product safety performance should meet the requirements of GB 4943; Capacity should meet the requirements of GB 9254 and GB 17625.1. 4.2 Pollutant emissions from product manufacturing enterprises shall comply with national or local standards for pollutant discharge. 4.3 Product manufacturers should strengthen clean production in the production process.5 Technical content5.1 Product Environmental Protection Design Requirements 5.1.1 Easy to disassemble design The product should be detachable. 5.1.2 Easy to recycle design 5.1.2.1 Plastic parts with a mass exceeding 25g or a planar surface area exceeding.200mm2 shall use a single type of polymer or blended poly The compound is labeled according to the requirements of GB/T 16288. 5.1.2.2 The type of polymer, copolymer or polymerization mixture used in the product shall not exceed 4 and is easily decomposed. 5.1.2.3 Plastic parts may be dismantled without damaging the original parts and shall not contain metal objects that cannot be separated from the plastic. 5.1.3 Requirements for hazardous substances in parts and components 5.1.3.1 In the outer casing and frame parts, except for the plastic parts adjacent to the heating and imaging components, chlorine and impurities shall not be used in the plastic parts. For bromine polymers, flame retardants containing organochlorine compounds and organic bromine compounds should not be added. 5.1.3.2 The phthalates listed in Appendix A shall not be added as plasticizers to plastic parts with a mass greater than 25g. 5.1.3.3 The content of short-chained chlorinated paraffins (SCCPs) in plastic parts shall not exceed 0.1% (mass fraction) of the total number of plastic parts. 5.1.3.4 Tributyltin (TBT) and triphenyltin (TPT) shall not be used in the product parts. 5.1.3.5 Lead glass shall not be used as a formulation component of lead (Pb) and its compounds. 5.1.3.6 The rechargeable battery that comes with the product should meet the requirements of HJ/T 238, and the dry battery should meet the requirements of HJ/T 239. 5.1.3.7 Lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium in plastic parts, metal parts, electronic components, solders and coatings The content of harmful substances such as (Cr6), polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) should meet the limits specified in GB/T 26572. Quantity requirements. 5.2 Product production stage requirements 5.2.1 Do not use hydrochlorofluorocarbons (HCFCs), 1,1,1-trichloroethane (C2H3Cl3), trichloroethylene (C2HCl3), dichloroethane (CH3CHCl2), dichloromethane (CH2Cl2), chloroform (CHCl3), carbon tetrachloride (CCl4), bromopropane (C3H7Br) The substance is used as a cleaning solvent. 5.2.2 Lead-free soldering process should be used during component assembly and connection. 5.3 Product energy requirements 5.3.1 The power of the product in sleep state shall comply with the requirements of Table 1. When the product has an external interface, it can be added according to Table 2. Table 1 Power limit of the product in sleep state Project power/W Limit ≤4.3+∑Pfa Table 2 Product Additional Function Power Factor Table Category additional features Power factor (Pfa)/W Additional feature description Basic value Note 1 Additional value Note 2 interface Wired connection with a transmission rate less than 20Mbps 0.3 0.2 Data or network interface, including USB1.x interface, IEEE488 interface, IEEE1284 interface, etc. Transmission rate is greater than or equal to 20Mbps and small Wired interface at 500Mbps 0.5 0.2 Data or network interface, including USB2.x interface, IEEE1394 interface, 100Mb Ethernet interface, etc. The transmission rate is greater than or equal to 500Mbps. Line interface 1.5 0.5 including 1Gb Ethernet interface, etc. Wireless Data Interface 3.0 0.7 includes Bluetooth interface, 802.11 interface, etc. other Cold cathode fluorescent tube (CCFL) technology Scanning -- 2.0 Does not consider the power of cold cathode fluorescent lamps (CCFLs) Quantity, this factor can only be used once Non-cold cathode fluorescent tube (CCFL) Technology scanning -- 0.5 Does not consider the power of non-cold cathode fluorescent lamps (CCFL) And quantity, this factor can only be used once Note 1. The product can still provide basic functions as a “basic value” while in sleep state. You can only include up to 3 basic values, and the remaining functions select additional values. Note 2. A single interface providing multiple additional functions should choose to use a power factor based on its basic function. 5.3.2 The power in the standby state of the product shall not exceed 1W. 5.3.3 The product should have the function of automatically entering the sleep state, and the preset time to enter the sleep state should not exceed 15 minutes. 5.4 Product noise requirements The noise limit of the product in working condition shall comply with the requirements of Table 3 and shall be expressed by the sound power LWA. Table 3 Product noise limits Product Type Noise LWA/ dB(A) Scan Speed (V) ≤ 40 ppm 40 ppm < Scan Speed (V) ≤ 60 ppm Scan Speed (V) > 60 ppm Flat type ≤60 Transparent medium ≤65 Paper feeding type ≤60 ≤65 ≤70 5.5 Product Packaging Requirements 5.5.1 Hydrochlorofluorocarbons (HCFCs) should not be used as blowing agents. 5.5.2 The total amount of heavy metals such as lead, cadmium, mercury and hexavalent chromium in packaging and packaging materials shall not exceed 100 mg/kg. 5.5.3 should be marked in accordance with GB/T 18455. 5.6 Product recycling stage requirements Enterprises should establish a waste product recycling and recycling management system to provide information on product recycling and recycling. 5.7 Product Description Requirements Product descriptions must be sold with the product and should include the following. a) use maintenance instructions; b) a description of the product power saving mode; c) Information on recycling and recycling of products after disposal.6 Test methods6.1 The technical content of 5.3 is tested in accordance with the method specified in Appendix B. 6.2 The technical content of 5.4 should be tested in the factory default state, using A4 format 80g/m2 ordinary copy paper according to GB/T The provisions of 7 of 18313-2001 are carried out. 6.3 Other requirements in the technical content shall be verified by means of document review in conjunction with on-site inspection.Appendix A(normative appendix) Banned phthalate Chinese name English name abbreviation Diisoisophthalate Di-iso-nonylphthalate DINP Di-n-octylphthalate DNOP Di-(2-ethylhexy)-phthalate DEHP Diisoisylphthalate DIDP Butylbenzylphthalate BBP Dibutylphthalate DBPAppendix B(normative appendix) Test procedure for power in the sleep state, preset delay time to enter sleep state, and power in standby state B.1 Test conditions B.1.1 Temperature. 18 ° C ~ 28 ° C B.1.2 Relative humidity. 10% to 80% B.2 power supply a) The test power supply is AC (220 ± 1%) V and the power supply frequency is (50 ± 0.5) Hz. b) The total harmonic distortion of the test power supply is not more than 3%. When testing the device under test with a nominal power greater than 1.5 kW, the total harmonic of the test power supply The wave distortion is no more than 5%. B.3 Test equipment The power meter has a resolution of 0.01W when the active power is not more than 10W; the active power measurement is greater than 10W and less than 100W. When the amount is measured, the resolution is 0.1W; when the active power is greater than or equal to 100W, the resolution is 1W. B.4 Test method B.4.1 Beta A developer (toner) consumption amount A4 for JB/T 6872 electrostatic copying machine was used. B.4.2 Product Settings a) The main parameters of the product (eg speed, energy saving mode) should be kept factory defaults; b) The product and test paper shall be placed under the environmental conditions specified in B.1 for 1 h or longer before testing; c) If the product has an automatic shutdown function, this function should be turned off during the test. B.4.3 Preset time test to enter sleep state a) Turn on the power of the power meter and set the working state, then connect the product to the power meter; b) Set the power switch of the product to “on” state. After the product is warmed up, perform more than 1 page of scanning tasks. Once done, record the duration of the product's sleep state. B.4.4 Power test in sleep state According to the procedure specified in B.4.3, wait for the product to go to sleep and stabilize, then start measuring its power consumption and record the measurement at the same time. The duration of the test should be no less than 10 minutes. B.4.5 Power test in standby mode Turn off the power of the product. After the standby state of the product is stable, start measuring the power consumption and record the duration of the measurement. The time should be no less than 10 minutes. B.5 Calculation method B.5.1 Power Ppn in sleep state Ppn=Ps/Tm (B.1) Note B.1 In the formula. Ps -- power in the sleep state of the product, Wh; Tm -- the time the product was measured, h. Note B.1. The power consumption per unit time is expressed in W, which is accurate to 0.1W. B.5.2 Power Poff in standby mode Poff=Pz/Toff (B.2) Note B.2 In the formula. Pz -- power consumption in standby mode, Wh; Toff -- The time measured in the product standby state, h. Note B.2. The power consumption per unit time is expressed in W, which is accurate to 0.1W. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HJ 2517-2012_English be delivered?Answer: Upon your order, we will start to translate HJ 2517-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of HJ 2517-2012_English with my colleagues?Answer: Yes. The purchased PDF of HJ 2517-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
