Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

HJ 2502-2010 English PDF

US$99.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
HJ 2502-2010: Technical requirement for environmental labeling products. Wallpapers
Status: Valid
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
HJ 2502-201099 Add to Cart 3 days Technical requirement for environmental labeling products. Wallpapers Valid

Similar standards

HJ 1347.1   HJ 1347.2   HJ 1346.1   

Basic data

Standard ID: HJ 2502-2010 (HJ2502-2010)
Description (Translated English): Technical requirement for environmental labeling products. Wallpapers
Sector / Industry: Environmental Protection Industry Standard
Word Count Estimation: 4,427
Date of Issue: 2010-12-22
Date of Implementation: 2011-02-01
Older Standard (superseded by this standard): HBC 23-2004
Regulation (derived from): Department of Environmental Protection Notice No. 98 of 2010
Issuing agency(ies): Ministry of Ecology and Environment

HJ 2502-2010: Technical requirement for environmental labeling products. Wallpapers

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical requirement for environmental labeling products.Wallpapers HJ National Environmental Protection Standard of the People's Republic Replace HBC 23-2004 Environmental Labeling Product Technical Requirements Wallpaper Technical requirement for environmental labeling products Wallpapers 2010-12-22 Approved.2011-02-1 Implementation Ministry of Environmental Protection released

Content

Foreword..2 1 Scope..3 2 Normative references..3 3 Terms and Definitions.3 4 Basic requirements..3 5 Technical content. 3 6 Inspection method..4

Foreword

To implement the Environmental Protection Law of the People's Republic of China, reduce the impact of wallpaper on the environment and human health during production and use. This standard is formulated to protect the quality of the environment and protect human health. This standard imposes a limit or prohibition on the wallpaper and its raw materials and harmful substances in the production process, and in the product manual The materials used in the construction are subject to express requirements. This standard has revised the "Technical Requirements Wallpaper for Environmental Labeling Products" (HBC 23-2004). The main changes are as follows. -- Revised the scope of application; -- modified terms and definitions; -- Modified the requirements for inks for wallpapers; -- Modified the requirements for harmful substances in wallpapers; -- Removed the requirement that wallpaper manufacturers must provide wallpaper adhesives; - Increased the requirement for prohibited substances in wallpapers; -- Increased the requirements for adhesives for wallpapers; -- Increased recycling requirements for waste in the production process; -- Added requirements for product instruction manuals. This standard applies to China Environmental Labeling Product Certification. This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection. This standard is mainly drafted by. Environmental Development Center of the Ministry of Environmental Protection, China Academy of Building Research, National Building Materials Testing Heart, China Building Decoration Materials Association Wallpaper Professional Committee, Shanghai Ouya Decoration Materials Co., Ltd., Guangdong Yulan Decoration Materials Co., Ltd., Beijing Te Pu Li Decoration Frame Material Co., Ltd., Beijing Oriental Grammy Wallpaper Co., Ltd., Jiangsu Ai She Wallpaper Company, Jiangmen Yuhua Wallpaper Co., Ltd., Shangmei Shijia (Beijing) Trading Co., Ltd., Zhejiang Wolaifei Decoration Materials Co., Ltd. Ruibao (Beijing) Decoration Design Co., Ltd., Zhejiang Kexiang Wallpaper Manufacturing Co., Ltd. This standard was approved by the Ministry of Environmental Protection on December 22,.2010. This standard has been implemented since February 1,.2011. This standard is explained by the Ministry of Environmental Protection. The previous versions of the standards replaced by this standard are. --HBC 23-2004. Environmental Labeling Product Technical Requirements Wallpaper

1 Scope of application

This standard specifies the terms and definitions, basic requirements, technical content and testing methods of wallpaper-based environmental labeling products. This standard applies to all kinds of wallpapers based on paper or cloth. It is not applicable to wall felts and other similar wall hangings.

2 Normative references

The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard. GB 18585 Interior decoration materials wallpaper GB 18586-2001 Indoor decoration materials, polyvinyl chloride film flooring, harmful substances, limited HJ/T 201 Environmental Labeling Product Technical Requirements Waterborne Coatings HJ/T 220 Environmental Labeling Product Technical Requirements Adhesive HJ/T 371 environmental labeling product technical requirements gravure ink and flexo ink

3 Terms and definitions

The following terms and definitions apply to this standard. 3.1 wallpaper wallpapers A decorative material that is applied to a wall or ceiling by an adhesive using paper or cloth as a substrate. 3.2 water-based ink water soluble ink An ink made from a water based binder.

4 basic requirements

4.1 Product quality should meet the requirements of GB 18585 and other related product quality standards. 4.2 Pollutant emissions from product manufacturing enterprises shall comply with the requirements of national or local pollutant discharge standards. 4.3 Product manufacturers should strengthen clean production in the production process.

5 Technical content

5.1 Requirements for raw materials 5.1.1 Requirements for inks The ink used for the production of the product shall be water-based ink, and the limit of harmful substances shall comply with the requirements of HJ/T 371. 5.1.2 Requirements for adhesives Adhesives for the production of products shall comply with the requirements for water-based adhesives for construction in HJ/T 220. 5.2 Requirements for the production process 5.2.1 The substances listed in Table 1 shall not be artificially added during the production process. Table 1 Prohibition of artificial addition of substances in products Type of substance Phthalates Di(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), o-benzene Butyl benzyl dicarboxylate (BBP) Glycol ether and its esters Ethylene glycol methyl ether, ethylene glycol methyl ether acetate, ethylene glycol ether, ethylene glycol ethyl ether acetate, diethylene glycol Vinyl butyl ether acetate Heavy metal lead, cadmium Benzene benzene, toluene, xylene, ethylbenzene Halogenated hydrocarbon 1,1,1-trichloroethane, carbon tetrachloride, 1,1-dichloroethane, 1,2-dichloroethane Hydrochlorofluorocarbons (CFCs) Hydrochlorofluorocarbon hydrochlorofluorocarbons (HCFCs) 5.2.2 Waste generated in the production process should be fully recycled. 5.3 Requirements for the product 5.3.1 The content of soluble heavy metal bismuth in the product shall not exceed 500mg/kg. 5.3.2 The content of volatile organic compounds in the product shall not exceed 10g/m2. 5.3.3 The content of vinyl chloride monomer in polyvinyl chloride (PVC) wallpaper shall not exceed 0.2mg/kg. 5.3.4 The coating of polyvinyl chloride (PVC) wallpaper shall not exceed 300g/m2. 5.4 The manufacturer shall clearly state in the product instruction manual. a) The adhesive used in the construction process shall comply with the requirements of the water-based adhesive for construction in HJ/T 220; b) The interface treatment agent for the base layer used in the construction process shall comply with the requirements of the interior wall paint in HJ/T 201.

6 Test methods

6.1 Technical content 5.1.1 The test is carried out in accordance with the method specified in HJ/T 371. 6.2 The technical content of 5.1.2 is tested in accordance with the method specified in HJ/T 220. 6.3 Technical content The detection of 5.3.1 and 5.3.3 is carried out in accordance with the method specified in GB 18585. 6.4 Technical content 5.3.2 The test shall be carried out in accordance with the method specified in 5.5 of GB 18586-2001. 6.5 Other indicators in the technical content are verified by means of document review combined with on-site inspection.
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of HJ 2502-2010_English be delivered?

Answer: Upon your order, we will start to translate HJ 2502-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of HJ 2502-2010_English with my colleagues?

Answer: Yes. The purchased PDF of HJ 2502-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.