HJ 25.3-2019 English PDFUS$1249.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email. HJ 25.3-2019: Technical guidelines for risk assessment of soil contamination of land for construction Status: Valid HJ 25.3: Historical versions
Basic dataStandard ID: HJ 25.3-2019 (HJ25.3-2019)Description (Translated English): Technical guidelines for risk assessment of soil contamination of land for construction Sector / Industry: Environmental Protection Industry Standard Classification of Chinese Standard: Z04 Word Count Estimation: 54,566 Date of Issue: 2019-12-05 Date of Implementation: 2019-12-05 Issuing agency(ies): Ministry of Ecology and Environment HJ 25.3-2019: Technical guidelines for risk assessment of soil contamination of land for construction---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. In the second type of land use, people can be exposed to contaminated soil due to direct skin contact. For carcinogenic and Non-carcinogenic effect, the recommended model for calculating the soil exposure corresponding to this pathway is shown in Appendix A formula (A.23) and formula (A.24). 6.4.3 Inhalation of soil particulate matter Under the second type of land use, people can be exposed to contaminated soil by inhaling airborne particulate matter from the soil. for The carcinogenic and non-carcinogenic effects of pollutants. The recommended model for calculating the soil exposure corresponding to this pathway is shown in Appendix A (A.25). And formula (A.26). 6.4.4 Inhalation of gaseous pollutants from surface soil in outdoor air Under the second type of land use, people can be exposed to pollution due to inhalation of gaseous pollutants from surface soil in outdoor air. Stain the soil. For the carcinogenic and non-carcinogenic effects of pollutants, the recommended model for calculating the soil exposure for this pathway is shown in the appendix A formula (A.27) and formula (A.28). 6.4.5 Intake of gaseous pollutants from the lower soil in the outdoor air Under the second type of land use, people can be exposed to pollutants by inhaling gaseous pollutants from the lower soil in the outdoor air. Stain the soil. For the carcinogenic and non-carcinogenic effects of pollutants, the recommended model for calculating the soil exposure for this pathway is shown in the appendix A formula (A.29) and formula (A.30). 6.4.6 Intake of gaseous pollutants from groundwater in outdoor air Under the second type of land use, people can be exposed to pollution by inhaling gaseous pollutants from groundwater in outdoor air. groundwater. For the carcinogenic and non-carcinogenic effects of pollutants, the recommended model for calculating the corresponding groundwater exposure for this pathway is attached Record A formula (A.31) and formula (A.32). 6.4.7 Inhalation of gaseous pollutants from lower soil in indoor air Under the second type of land use, people can be exposed to pollutants by inhaling gaseous pollutants from the lower soil in the indoor air. Stain the soil. For the carcinogenic and non-carcinogenic effects of pollutants, the recommended model for calculating the soil exposure for this pathway is shown in the appendix A formula (A.33) and formula (A.34). 6.4.8 Intake of gaseous pollutants from groundwater in indoor air Under the second type of land use, people can be exposed to pollution by inhaling gaseous pollutants from groundwater in indoor air groundwater. For the carcinogenic and non-carcinogenic effects of pollutants, the recommended model for calculating the corresponding groundwater exposure for this pathway is attached Record the formula (A.35) and formula (A.36). 6.4.9 Drinking groundwater route Under the second type of land use, people can be exposed to groundwater pollutants due to drinking groundwater. For single pollutants Carcinogenic and non-carcinogenic effects, the recommended model for calculating the corresponding groundwater exposure of this pathway is shown in Appendix A formula (A.37) and (A.38). 7 Technical requirements for toxicity assessment7.1 Analysis of toxic effects of pollutants Analyze the harmful effects of pollutants on human health through different pathways, including carcinogenic effects, non-carcinogenic effects, pollutants The harm mechanism to human health and the dose-response relationship. 7.2 Determination of pollutant-related parameters 7.2.1 Carcinogenicity toxicity parameters Carcinogenicity toxicity parameters include respiratory inhalation unit carcinogenic factor (IUR), respiratory inhalation carcinogenic slope factor (SFi), oral carcinogenic slope factor (SFo), and skin contact carcinogenic slope factor (SFd). Partial pollutant The recommended values of toxicity parameters for carcinogenic effects are shown in Table B.1 of Appendix B. Breathing inhalation carcinogenic slope factor (SFi) according to the respiratory inhalation unit carcinogenic factor (IUR) in Table B.1 of Appendix B Derived; Carcinogenic slope coefficient (SFd) of skin contact according to Table B.1 of Appendix B Extrapolated to obtain. The recommended models for extrapolating SFi and SFd are shown in Appendix B formula (B.1) and formula (B.3), respectively. 7.2.2 Non-carcinogenic effect toxicity parameters Non-carcinogenic effect toxicity parameters include respiratory inhalation reference concentration (RfC), respiratory inhalation reference dose (RfDi), Oral intake reference dose (RfDo) and skin contact reference dose (RfDd). Non-carcinogenic effects of some pollutants Refer to Table B.1 for Appendix B for recommended values. The respiratory inhalation reference dose (RfDi) is extrapolated from the respiratory inhalation reference concentration (RfC) in Table B.1. skin The reference exposure dose (RfDd) was extrapolated from the oral intake reference dose (RfDo) in Table B.1. For extrapolation The recommended models for RfDi and RfDd are shown in Appendix B formula (B.2) and formula (B.4), respectively. 7.2.3 Physicochemical parameters of pollutants The physical and chemical properties of pollution required for risk assessment include dimensionless Henry constant (H) ´, diffusion coefficient in air (Da), water diffusion coefficient (Dw), soil-organic carbon partition coefficient (Koc), and water solubility (S). Partially soiled The recommended values of the physical and chemical properties of the dyes are shown in Table B.2. 7.2.4 Other related parameters of pollutants Other relevant parameters include digestive tract absorption factor (ABSgi), skin absorption factor (ABSd), and oral intake Yield factor (ABSo). Recommendations for digestive tract absorption factor (ABSgi) and skin absorption factor (ABSd) of some pollutants For parameter values, see Table B.1 in Appendix B. For recommended parameter values for oral absorption absorption factor (ABSo), see Table G.1 in Appendix G.8 Technical requirements for risk characterization8.2.3 Carcinogenic risk of single pollutant in groundwater For a single pollutant, calculate the gaseous pollutants drawn from the groundwater drawn into the outdoor air, drawn into the indoor air Recommended models for carcinogenic risk from groundwater gaseous pollutants and drinking groundwater exposure pathways are shown in Appendix C. (C.15), (C.16), (C.17). Calculate the risk of carcinogenicity of a single pollutant in groundwater through the above three exposure routes The recommended model is shown in Appendix C (C.18). 8.2.4 Hazard quotient of single pollutant in groundwater For a single pollutant, calculate the gaseous pollutants drawn from the groundwater drawn into the outdoor air, drawn into the indoor air Gaseous pollutants from groundwater and recommended models of hazards from exposure to drinking groundwater are listed in Appendix C. (C.19), (C.20), and (C.21). Calculate the hazard index of a single pollutant in groundwater through the above three exposure routes The recommended model is shown in Appendix C (C.22). 8.3 Uncertainty analysis 8.3.1 The main sources of uncertainty in the risk assessment results of the plot should be analyzed, including exposure scenario assumptions and assessment models Applicability, model parameter values, etc. 8.3.2 Analysis of Contribution Rate of Exposure Risk Recommended models for analysis of carcinogenic risk and hazard contribution rate of a single pollutant through different exposure routes, see Appendix D, respectively Formula (D.1) and formula (D.2). The greater the percentage calculated from the above formula, the more specific the route of exposure The higher the contribution rate to total risk. 8.3.3 Model parameter sensitivity analysis 8.3.3.1 Principles for determining sensitive parameters The parameter (P) selected for sensitivity analysis should generally be a parameter that has a greater impact on the risk calculation results, such as human Group-related parameters (weight, exposure period, frequency of exposure, etc.), parameters related to the route of exposure (daily soil intake, Soil surface soil adhesion coefficient, daily inhaled air volume, indoor space volume and steam infiltration area ratio, etc.). When the risk contribution rate of a single exposure pathway exceeds 20%, a sensitivity analysis of the population and parameters related to that pathway should be performed. 8.3.3.2 Sensitivity analysis method The sensitivity of model parameters can be expressed by the sensitivity ratio, that is, the change of model parameter values (from P1 to P2) and The ratio of changes in carcinogenic risk or harm quotient (from X1 to X2). The recommended model for calculating the sensitivity ratio is attached Record the D formula (D.3). The greater the sensitivity ratio, the greater the impact of this parameter on risk. Perform model parameter sensitivity analysis Taking into account the actual value range of the parameter, the change range of the parameter value is determined.9 Technical requirements for calculating risk control values9.1 Acceptable Carcinogenic Risk and Harm Quotient When calculating the risk control value of soil and groundwater based on carcinogenic effects, this standard adopts a single pollutant The cancer risk is 10-6; the single pollutant used in calculating soil and groundwater risk control values based on non-carcinogenic effects ... ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HJ 25.3-2019_English be delivered?Answer: Upon your order, we will start to translate HJ 25.3-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of HJ 25.3-2019_English with my colleagues?Answer: Yes. The purchased PDF of HJ 25.3-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version HJ 25.3-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version HJ 25.3-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
