HJ 1257-2022 English PDF

US$529.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
HJ 1257-2022: Chemical substances environmental management - Terminology for testing of chemical substances
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
HJ 1257-2022	529	Add to Cart	5 days	Chemical substances environmental management - Terminology for testing of chemical substances	Valid

Similar standards

HJ 1347.1   HJ 1347.2   HJ 1346.1   

Basic data

Standard ID: HJ 1257-2022 (HJ1257-2022)
Description (Translated English): Chemical substances environmental management - Terminology for testing of chemical substances
Sector / Industry: Environmental Protection Industry Standard
Word Count Estimation: 23,231
Issuing agency(ies): Ministry of Ecology and Environment

HJ 1257-2022: Chemical substances environmental management - Terminology for testing of chemical substances

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Chemical substances environmental management - Terminology for testing of chemical substances National Ecological Environment Standard of the People's Republic of China Chemical Substance Environmental Management Chemical Substance Testing Terminology Chemical substances environmental management-Terminology for testing of chemical substances Posted on 2022-06-06 2022-06-15 Implementation Published by the Ministry of Ecology and Environment directory Foreword...ii 1 Scope...1 2 Terms and Definitions...1 2.1 General terms...1 2.2 Aquatic toxicity test...4 2.3 Toxicity test for terrestrial organisms...5 2.4 Degradability test...6 2.5 Accumulation test...10 Appendix A (Informative Appendix) Chinese Pinyin Index...12 Appendix B (Informative Appendix) Index of English Corresponding Words...15 Chemical Substance Environmental Management Chemical Substance Testing Terminology

1 Scope of application

This standard specifies the chemical substance testing terms and definitions commonly used in the environmental risk assessment of chemical substances. This standard applies to the terminology used in the testing of chemical substances in the field of environmental risk management of chemical substances.

2 Terms and Definitions

2.1 General terms 2.1.1 test substances The single chemical substance or mixture being tested. 2.1.2 Poorly water-soluble substances Substances with a solubility in water of less than 0.1 g/L at 20 °C. 2.1.3 Substances of unknown or variable composition, complex reaction products or biological materials; UVCB Substances, complex reaction products, or biological materials of unknown or variable composition. 2.1.4 difficult test chemicals Chemical substances in testing that are difficult to test by conventional standardized methods. It is mainly manifested that the conventional processing methods are not applicable, etc., which can be passed through Valid test results are obtained by partially modifying or supplementing standard test methods. 2.1.5 test organisms Test animals, plants, microorganisms, etc. in the system. Also called test organism. 2.1.6 test solution The mixture formed by a medium such as water or culture medium in which the test substance is dissolved or suspended and the test substance. 2.1.7 parent animals In a breeding trial, the parent used for breeding at the start of the test is tested. 2.1.8 offspring offspring In breeding experiments, larvae produced by the parent. 2.1.9 loading rate When preparing the test solution of the test substance that is insoluble in water, the ratio of the test substance to the test medium is usually expressed in mg/L. for unstable Test object, the bearing rate is expressed by the test object itself. In fish-related tests, it also refers to the wet weight of fish per unit volume of water. 2.1.10 octanol-water partition coefficient; Kow; Pow The concentration ratio of the test substance when it reaches equilibrium in a two-phase medium of n-octanol and water. 2.1.11 adsorption coefficient; Koc The ratio of the concentration of the test substance when it reaches equilibrium in an organic medium (soil or sediment) and an aqueous two-phase medium. 2.1.12 water-accommodated fraction; WAF The total dispersion of a multi-component test substance in water, including the dissolved, suspended and/or emulsified fractions. 2.1.13 water soluble fraction; WSF The water-loaded fraction is subjected to separation steps (eg, centrifugation, filtration) to remove insoluble suspended and emulsified fractions. 2.1.14 static test During the test, the test mode of the test solution is not updated. 2.1.15 semi-static renewal test In the test, in order to ensure a certain concentration of the test substance, there is a plan to replace the test solution regularly. 2.1.16 flow-through test A test in which a test organism is exposed to a continuous or intermittent flow of a test solution. 2.1.17 limit test A test given an upper dose or concentration. Usually the test substance is expected to be less toxic or less soluble and no predictor was observed in pilot studies Limit test can be carried out when the period effect is not observed. 2.1.18 photoperiod photoperiod Alternate cycles of light and dark conditions within 24 hours. 2.1.19 test endpoint Compared with the control group, the measurable characteristic index that the test substance changes the test organism, the commonly used test endpoints are mortality, inhibition rate Wait. 2.1.20 mortality mortality The proportion of the number of test organisms with no signs of life activity to the total number of test organisms, usually expressed as a percentage. 2.1.21 biomass biomass Dry weight of living material present in a population under test, may also refer to number of leaves, leaf area, number of cells per unit volume or fluorescence Alternative indicators such as light value. 2.1.22 growth yield The difference between the biomass at the end of the test and the start of the test. 2.1.23 Reproductive output The total number of surviving offspring produced by the parent during the test period. 2.1.24 hatchability Percentage of hatched eggs (eggs) in a breeding test such as birds or fish. 2.1.25 embryo viability Percentage of hatched eggs that have begun embryonic development after fertilization in reproductive testing. 2.1.26 behavioral symptoms The abnormal behavior of the test organism after exposure to the test substance is one of the indicators of harmful effects. 2.1.27 coefficient of variation coefficient of variation; CV The ratio of the standard deviation to the mean, dimensionless, usually expressed as a percentage. 2.1.28 dosedose The amount of the test substance that enters the test organism and interacts with metabolic processes or important receptors. When testing, usually refers to the administration of the test substance amount or input. 2.1.29 dose-response (effect) relationship Quantitative relationship between dose and biological response (effect) in a test. 2.1.30 no lethal concentration; LC0 The highest concentration of the test substance that did not cause the death of any test organism during a given test period. 2.1.31 total lethal concentration; LC100 The lowest concentration of the test substance that causes 100% of the test organisms to die during a given test period. 2.1.32 median effect concentration; EC50 The concentration of the test substance that causes an observed effect in 50% of the test organisms during a given test period. 2.1.33 effect concentration; ECx The concentration of the test substance that results in an observed effect in x% of the test organisms compared to the control group during a given test period. 2.1.34 median lethal dose (concentration); LD50; LC50; The dose or concentration of the test substance that causes the death of 50% of the test organisms during a given test period. 2.1.35 median lethal dietary dose; LDD50 At the end of the oral acute/chronic toxicity test, the ingested dose that caused the death of 50% of the tested organisms. 2.1.36 x% decay time disappearance time x; DTx The time required for the concentration of the test substance to decrease to x% of the initial concentration. If the transformation process of the test substance follows the first-order kinetic equation, The 50% decay time (DT50) is the same as the half-life (t1/2). 2.1.37 Half-life half-life; t1/2 The time required for the concentration of the test substance to decrease to 50% is generally used to describe the first-order reaction rate. Half-life and degradation rate constant (k) The relation is t1/2 = ln 2/k. 2.1.38 lowest observed effect concentration; LOEC The lowest level that produced a statistically significant (p< 0.05) effect on the test organism compared to the control group during a given test period Test substance concentration. 2.1.39 no observed effect concentration; NOEC The most statistically non-significant effect (p≥0.05) on the test organism compared to the control group for a given test period High test substance concentrations. 2.1.40 maximum tolerated concentration; MTC The maximum concentration that does not result in the death of the test organism during a given test period, usually expressed as 10% of the median lethal concentration (LC50). 2.1.41 predicted no effect concentration; PNEC The highest concentration of the test substance that is expected to have no adverse effect on the test organism in the environmental unit of interest under current cognitive conditions. 2.1.42 domestication acclimation The physiological or behavioral adaptation process of the tested organism to the tested environmental conditions. 2.1.43 hydrolysis The chemical decomposition of a test substance in water. 2.1.44 Reference (toxic) substances reference toxicants; reference materials; reference substances; reference chemicals A chemical substance used in a test to confirm or deny a certain characteristic of the test substance or to judge the effectiveness of the test system, which has a certain toxicity properties, stability and analytical methods. It can be used between different laboratories, at different times within the same laboratory, or between different people. Comparable evaluation. 2.2 Aquatic toxicity test 2.2.1 acute aquatic toxicity The lethality, activity inhibition or growth inhibition of aquatic organisms after short-term (hours or days) exposure to relatively high concentrations of the test substance good effect. Toxicity endpoints are usually expressed by the lethality rate, activity inhibition rate or growth inhibition rate of the tested organisms, and the 96 h LC50 of fish, Crustaceans 48 h EC50, algae 72 h or 96 h EC50. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of HJ 1257-2022_English be delivered?

Answer: Upon your order, we will start to translate HJ 1257-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of HJ 1257-2022_English with my colleagues?

Answer: Yes. The purchased PDF of HJ 1257-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.