HJ 1116-2020 English PDF
Basic dataStandard ID: HJ 1116-2020 (HJ1116-2020)Description (Translated English): Technical specification for application and issuance of pollutant permit - Manufacture of paint, ink, pigments and allied products Sector / Industry: Environmental Protection Industry Standard Word Count Estimation: 142,111 Date of Issue: 2020-03-04 Date of Implementation: 2020-03-04 Issuing agency(ies): Ministry of Ecology and Environment HJ 1116-2020: Technical specification for application and issuance of pollutant permit - Manufacture of paint, ink, pigments and allied products---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Technical specification for application and issuance of pollutant permit - Manufacture of paint, ink, pigments and allied products National Environmental Protection Standards of the People's Republic of China Technical specifications for pollutant discharge permit application and issuance Coatings, inks, pigments and similar products manufacturing 2020-03-04 released 2020-03-04 Implementation Issued by the Ministry of Ecology and Environment Table of contentsForeword...II 1 Scope of application...1 2 Normative references...1 3 Terms and definitions...4 4 Key pollution management units...6 4.1 Requirements for the declaration of the basic situation of the pollutant discharge unit...6 4.2 Corresponding discharge outlets in the production and discharge process and the determination method of the permitted discharge limit...34 4.3 Feasible technical requirements for pollution prevention and control...42 4.4 Self-monitoring management requirements...47 4.5 Requirements for preparation of environmental management ledgers and pollution discharge permit execution reports...54 4.6 Accounting method of actual emissions...58 4.7 Compliance Judgment Method...61 5 Simplified management of sewage units...64 5.1 Requirements for the declaration of the basic situation of pollutant discharge units... 5.2 Corresponding discharge outlets in the production and discharge process and the determination method of the permitted discharge limit...86 5.3 Feasible technical requirements for pollution prevention...89 5.4 Self-monitoring management requirements...94 5.5 Requirements for the preparation of environmental management ledger and pollution discharge permit implementation report...102 5.6 Accounting method of actual emissions...104 5.7 Compliance Judgment Method...104 Appendix A (informative appendix) product name and basic information of pollutants...108 Appendix B (Informative Appendix) Environmental Management Ledger Records (Key Management Pollutant Discharge Units)...119 Appendix C (informative appendix) Reference table of environmental management ledger records (simplified management of pollutant discharge units)...125 Appendix D (Informative Appendix) Form of Annual Implementation Report of Pollution Discharge Permit (Key Management Pollutant Discharge Units)...127 Appendix E (informative appendix) Form of annual report on the implementation of pollutant discharge permit (simplified management of pollutant discharge units) 135ForewordIn order to implement the "Environmental Protection Law of the People's Republic of China", "The Air Pollution Prevention Law of the People's Republic of China", "China The Water Pollution Prevention and Control Law of the People’s Republic of China, the Soil Pollution Prevention and Control Law of the People’s Republic of China and other laws and regulations, the Office of the State Council Notice of the Office on Issuing the Implementation Plan for the Control of Pollutant Discharge Permit System (Guobanfa (2016﹞81), "Pollution Permit Manageable Measures (for Trial Implementation) (Ministry of Environmental Protection Order No. 48) and the List of Classified Management of Discharge Permits for Fixed Pollution Sources, Improve the technical support system for pollutant discharge permits, and guide and standardize the pollutant discharge of paint, ink, pigment and similar product manufacturing industries The work of permit application and issuance is to develop this standard. This standard specifies the basis for the application and issuance of pollutant discharge permits for the manufacturing of paint, ink, pigment and similar products. In this case, the requirements for filling in, the determination of permitted emission limits, the methods of actual emission accounting and compliance determination, as well as self-monitoring, Environmental management requirements such as the environmental management account and the implementation report of pollution permits, and put forward coatings, inks, pigments and similar products Feasible technical requirements for pollution prevention and control in the manufacturing industry. Appendix A to Appendix E of this standard are informative appendices. This standard is issued for the first time. This standard is formulated by the Department of Environmental Impact Assessment and Emission Management and the Department of Regulations and Standards of the Ministry of Ecology and Environment. The main drafting organizations of this standard. East China University of Science and Technology, Beijing Academy of Environmental Sciences, Environmental Engineering of the Ministry of Ecology and Environment Process Evaluation Center, China Coatings Industry Association, Ink Branch of China Daily Chemical Industry Association, Shanghai Environmental Monitoring Center. This standard was approved by the Ministry of Ecology and Environment on March 04, 2020. This standard will be implemented on March 04, 2020. This standard is interpreted by the Ministry of Ecology and Environment. Pollutant discharge permit application and issuance of technical specifications for paints, inks, pigments and similar Product manufacturing1 Scope of applicationThis standard specifies the basis for the application and issuance of pollutant discharge permits for the manufacturing of paint, ink, pigment and similar products. In this case, the requirements for filling in, the determination of permitted emission limits, the actual emission accounting and compliance determination methods, as well as self-monitoring, environmental Environmental management requirements such as the environmental management account and the implementation report of pollution permits, and proposed the system of paint, ink, pigment and similar products. Feasible technical requirements for pollution prevention and control of industrial pollutants. This standard is applicable to guide the management of pollutant discharge permits for paint, ink, pigment and similar product manufacturing industries in the country The information platform fills in relevant application information, which is suitable for guiding the issuing authority to review and determine the manufacture of paints, inks, pigments and similar products. Permit requirements for pollution discharge permits for manufacturing pollutants. This standard is applicable to the emission of air pollutants and water pollutants by pollutants from the manufacturing industry of paint, ink, pigment and similar products Management of pollution permits. The pollution discharge units of paint, ink, pigment and similar product manufacturing in this standard include paint manufacturing, ink and similar products Manufacturing, industrial pigment manufacturing, arts and crafts pigment manufacturing, dye manufacturing (including organic pigment manufacturing, dye pigment intermediate manufacturing), The pollutant discharge unit of the manufacturing category of packing and similar products for sealing. In the paint, ink, pigment and similar products manufacturing industry, the implementation of the "thermal power plant air pollutant emission standards" (GB 13223) production facilities or discharge outlets, apply the "Technical Specification for Application and Issuance of Pollution Permits for Thermal Power Industry"; For production facilities or discharge outlets that implement the "Boiler Air Pollutant Emission Standard" (GB 13271), the "Pollution Permit" is applicable Application and issuance of technical specifications for boilers (HJ 953); implementation of "Synthetic Resin Industry Pollutant Emission Standards" (GB 31572) For production facilities or discharge outlets, the "Pollution Discharge Permit Application and Issuance Technical Specification for Petrochemical Industry" (HJ 853) shall apply; The production facilities or emissions of zinc oxide and other production facilities that implement the "Emission Standard of Pollutants for the Inorganic Chemical Industry" (GB 31573) Inorganic Chemical Industry (HJ 1035) is applicable to the "Technical Specification for Pollution Discharge Permit Application and Issuance" (HJ 1035); The production facilities or discharge outlets of dye and pigment intermediates according to the Industrial Pollutant Discharge Standard (GB 31571) shall be applicable to the License application and issuance of technical specifications for the petrochemical industry (HJ 853). Paints, inks, paints, inks, etc. that are not specified in this standard but discharge industrial waste water, waste gas or toxic and hazardous pollutants specified by the state For other pollution-producing facilities and discharge outlets of the pollutant discharge unit of the paint and similar product manufacturing industry, refer to the "Pollution Discharge Permit Application and Issuing Techniques" "General Rules of Technical Specifications" (HJ 942) requires implementation.2 Normative referencesThis standard quotes the following documents or their clauses. For undated references, the effective version applies to this standard. GB 8978 Integrated Wastewater Discharge Standard GB 9078 Emission Standard of Air Pollutants for Industrial Furnaces GB 13223 Emission Standard of Air Pollutants for Thermal Power Plants GB 13271 Boiler Air Pollutant Emission Standard GB 14554 Emission Standard of Odor Pollutants GB 16297 Comprehensive Emission Standard of Air Pollutants GB 18597 Pollution Control Standard for Hazardous Waste Storage GB 18599 General industrial solid waste storage and disposal site pollution control standards GB 25463 Discharge Standard of Water Pollutants for Ink Industry GB 31571 Pollutant Emission Standard for Petrochemical Industry GB 31572 Pollutant Emission Standard for Synthetic Resin Industry GB 31573 Inorganic Chemical Industry Pollutant Discharge Standard GB 37822 Unorganized emission control standard of volatile organic compounds GB 37824 Emission Standard of Air Pollutants for Coating, Ink and Adhesive Industry GB/T 4754-2017 Classification of National Economic Industries GB/T 16157 Determination of particulate matter in exhaust from stationary sources and sampling method for gaseous pollutants GB/T 16758 Classification and technical conditions of exhaust hoods HJ 75 Technical specification for continuous monitoring of emission of stationary pollution source flue gas (SO2, NOX, particulate matter) HJ 76 Technical requirements and testing methods for continuous monitoring system for emission of stationary pollution source flue gas (SO2, NOX, particulate matter) HJ 91.1 Technical Specification for Wastewater Monitoring Technical requirements and testing methods of HJ 101 ammonia nitrogen water quality online automatic monitor HJ 353 water pollution source online monitoring system (CODcr, NH3-N, etc.) installation technical specifications HJ 354 Water Pollution Source Online Monitoring System (CODcr, NH3-N, etc.) Acceptance Technical Specification HJ 355 water pollution source online monitoring system (CODcr, NH3-N, etc.) operation technical specifications HJ 356 Technical Specification for Data Validity Judgment of Water Pollution Source Online Monitoring System (CODcr, NH3-N, etc.) HJ 377 Chemical Oxygen Demand (CODCr) Water Quality Online Automatic Monitor Technical Requirements and Testing Methods HJ 493 Technical Regulations for Storage and Management of Water Quality Samples HJ 494 Technical Guide for Water Quality Sampling HJ 495 Technical Regulations for Water Quality Sampling Scheme Design HJ 608 Code Rules for Pollutant Discharge Units HJ 819 General Rules of Technical Guidelines for Self-monitoring of Pollutant Discharge Unit HJ 820 Technical Guide for Self-monitoring of Sewage Discharge Units Thermal Power and Boilers HJ 836 Gravimetric method for determination of low-concentration particulate matter in waste gas from stationary sources HJ 853 Pollutant Discharge Permit Application and Issuance Technical Specification Petrochemical Industry HJ 905 Technical Specification for Environmental Monitoring of Odor Pollution HJ/T 91 Technical specification for surface water and sewage monitoring HJ 942 General Rules of Technical Specifications for Pollution Discharge Permit Application and Issuance HJ 944 General Rules of Technical Specifications for Environmental Management Ledger and Pollution Discharge Permit Implementation Report of Pollutant Discharge Units (Trial) HJ 947 Technical Guidelines for Self-monitoring of Pollutant Dischargers Petrochemical Industry HJ 953 Sewage discharge permit application and issuance of technical specifications for boilers HJ 1013 Technical requirements and testing methods for continuous monitoring system of non-methane hydrocarbons in waste gas from stationary sources HJ 1035 Pollutant Discharge Permit Application and Issuance Technical Specification Inorganic Chemical Industry HJ 1087 Technical Guide for Self-monitoring of Pollutant Discharge Unit HJ/T 55 Technical Guidelines for Monitoring Unorganized Emissions of Air Pollutants HJ/T 164 Technical Specification for Groundwater Environmental Monitoring HJ/T 166 Technical Specification for Soil Environmental Monitoring HJ/T 373 Fixed pollution source monitoring quality assurance and quality control technical specifications (trial implementation) HJ/T 397 Fixed source exhaust gas monitoring technical specification AQ/T 4274 Technical specification for wind speed detection and evaluation of local exhaust facilities control "List of Classification Management of Discharge Permits for Fixed Pollution Sources" "Notice of the State Council on the Three-Year Action Plan for Winning the Blue Sky Defense War" (GuoFa﹝2018﹞No.22) "Administrative Measures for Pollution Discharge Permits (Trial)" (formerly Ministry of Environmental Protection Order No. 48) "National Hazardous Waste List" (Order No. 39 of the Ministry of Environmental Protection) "Administrative Measures for the Transfer of Hazardous Wastes" (State Environmental Protection Administration Order No. 5) "Technical Requirements for Standardized Remediation of Sewage Outlets (for Trial Implementation)" (Huan Jian [1996] No. 470) "Administrative Measures for the Operation of Pollution Source Automatic Monitoring Facilities" (Huanfa [2008] No. 6) "Announcement on the Implementation of Special Emission Limits for Air Pollutants" (formerly Ministry of Environmental Protection Announcement No. 14 of.2013) "Reply to Issues Concerning the Implementation of Special Emission Limits for Air Pollutants" (Huanban Qiqihan [2016] No. 1087) "Announcement on the Implementation of Special Emission Limits for Air Pollutants in Beijing-Tianjin-Hebei Air Pollution Transmission Channel Cities" (formerly Ministry of Health Announcement No. 9 of.2018) "Volatile Organic Compounds (VOCs) Pollution Prevention Technology Policy" (formerly Ministry of Environmental Protection Announcement.2013 No. 31) "Comprehensive Treatment Plan for Volatile Organic Compounds in Key Industries" (Huantaiqi﹝2019﹞53) "Announcement on the Special Emission Limits of Water Pollutants in the Taihu Lake Basin Implementing National Emission Standards" (No. 28,.2008 of the Ministry of Environmental Protection) "Announcement on the Scope of Administrative Areas for the Implementation of National Pollutant Discharge Standards and Water Pollutant Discharge Limits in the Taihu Lake Basin" (Environmental Ministry of Environmental Protection Announcement No. 30 of.2008) "Announcement on Issuing the "List of Toxic and Hazardous Air Pollutants (2018)" (Ministry of Ecology and Environment, National Health Health Committee Announcement No. 4 of.2019) "Announcement on Issuing the "List of Toxic and Hazardous Water Pollutants (First Batch)" (Ministry of Ecology and Environment Announcement No. 28,.2019) "Announcement on Issuing the List of Priority Controlled Chemicals (First Batch)" (formerly Ministry of Environmental Protection Announcement No. 83 of.2017)3 Terms and definitionsThe following terms and definitions apply to this standard. 3.1 Manufacturing of paint, ink, pigments and allied products Refers to the C264 paint, ink, pigment and similar product manufacturing industry specified in GB/T 4754-2017, including C2641 Paint manufacturing, C2642 ink and similar product manufacturing, C2643 industrial pigment manufacturing, C2644 arts and crafts pigment manufacturing, C2645 dye manufacturing, C2646 sealing filler and similar products manufacturing. See Appendix A for specific product categories and definitions. 3.2 Pollutant emission units or facilities of paint, ink, pigment and similar product manufacturing industry manufacture of paint,ink, pigments and allied products Refers to sewage disposal units or production facilities engaged in the manufacturing of paints, inks, pigments and similar products. 3.3 manufacturing of paints and coatings Refers to the production of covering materials made by adding pigments, solvents and auxiliary materials to natural resins or synthetic resins. Production activities, including the preparation of paint and its thinner, paint remover and other auxiliary materials. 3.4 manufacturing of ink and allied products Refers to a dispersion system composed of colorants, binders, auxiliary agents, etc., which are transferred to the substrate during the printing process Coloring substances, and computer printing, copier ink and other production activities. 3.5 manufacturing of industrial pigments Refers to the production activities of inorganic pigments and similar materials used in coatings, inks, ceramics, enamel, glass and other industries, mainly See Appendix A for products and classifications. 3.6 manufacturing of arts and crafts pigments Refers to the manufacture of artistic pigments such as oil paintings, gouache paintings, and advertisements. 3.7 manufacturing of dyes and organic pigments Refers to the production activities of organic synthesis, plant or animal pigments, and organic pigments. Including dyes and organic pigments For the definition of specific product categories, see Appendix A. 3.8 dyes Refers to colored organic compounds that can be dissolved in water or other media to make a solution or dispersion, and can be directly or through a mordant It is a substance that can color fibers and have certain fastness and vividness after dyeing. 3.9 organic pigments Refers to an organic compound that colors a coloring substance in a state of highly dispersed particles. The pigment itself does not dye the fiber When using, it mainly relies on the action of the polymer binder to stick the tiny particles of the pigment on the surface or inside of the fiber. 3.10 dye and pigment intermediates Refers to various aromatic derivatives used in the production of dyes and organic pigments. See Appendix A for specific product categories. 3.11 Manufacturing of packing and allied products for sealing Refers to the production activities used in the manufacture of architectural coatings, sealing and painters, and other similar chemical materials. 3.12 key pollutant emission unit Refers to the pollutant discharge units that are included in the "List of Classified Management of Permits for Discharge of Fixed Pollution Sources". 3.13 Simplified pollutant emission unit Refers to the pollutant discharge units that are included in the "List of Classification Management of Permits for Discharge of Fixed......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HJ 1116-2020_English be delivered?Answer: Upon your order, we will start to translate HJ 1116-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 10 ~ 14 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of HJ 1116-2020_English with my colleagues?Answer: Yes. The purchased PDF of HJ 1116-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
