HJ 1110-2020 English PDFUS$1019.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. HJ 1110-2020: Technical specification for application and issuance of pollutant permit - Farm and sideline food processing industry - Feed processing industry, vegetable oil processing industry Status: Valid
Basic dataStandard ID: HJ 1110-2020 (HJ1110-2020)Description (Translated English): Technical specification for application and issuance of pollutant permit - Farm and sideline food processing industry - Feed processing industry, vegetable oil processing industry Sector / Industry: Environmental Protection Industry Standard Word Count Estimation: 44,449 Date of Issue: 2020-02-28 Date of Implementation: 2020-02-28 Issuing agency(ies): Ministry of Ecology and Environment HJ 1110-2020: Technical specification for application and issuance of pollutant permit - Farm and sideline food processing industry - Feed processing industry, vegetable oil processing industry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Technical specification for application and issuance of pollutant permit - Farm and sideline food processing industry - Feed processing industry, vegetable oil processing industry National Environmental Protection Standards of the People's Republic of China Technical specifications for pollutant discharge permit application and issuance Agricultural and sideline food processing industry-feed processing, vegetable oil Processing industry 2020-02-28 release 2020-02-28 Implementation Issued by the Ministry of Ecology and Environment Table of contentsForeword...II 1 Scope of application...1 2 Normative references...1 3 Terms and definitions...2 4 Requirements for the basic information of pollutant discharge units...3 5 Corresponding discharge outlets in the production and discharge process and methods for determining permitted discharge limits...14 6 Feasible technical requirements for pollution prevention...17 8 Environmental Management Ledger Record and Implementation Report Preparation Requirements...19 9 Accounting method of actual emissions...22 10 Compliance Judgment Method...23 Appendix A (informative appendix) Reference method for calculating the allowable discharge of wastewater pollutants...25 Appendix B (informative appendix) Reference table of feasible technologies for wastewater pollution prevention and control...26 Appendix C (Informative Appendix) Reference Table of Available Technologies for Waste Gas Pollution Prevention and Control...27 Appendix D (Informative Appendix) Reference Table for Environmental Management Ledger Records...28 Appendix E (Normative Appendix) Accounting Method of Actual Wastewater Pollutant Discharge...39ForewordIn order to implement the "Environmental Protection Law of the People's Republic of China", "The Air Pollution Prevention Law of the People's Republic of China", "China The Water Pollution Prevention and Control Law of the People’s Republic of China, the Soil Pollution Prevention and Control Law of the People’s Republic of China and other laws and regulations, and the Office of the State Council Notice on Issuing the Implementation Plan of the Permit System for Controlling Pollutant Discharge (Guobanfa [2016] No. 81), Manageable Measures (for Trial Implementation)" (Ministry of Environmental Protection Order No. 48) to improve the technical support system for pollutant discharge permits, guidance and regulations This standard is formulated for the application and issuance of pollution discharge permits for feed processing and vegetable oil processing industries. This standard stipulates the basic conditions for the application and issuance of pollutant discharge permits for feed processing and vegetable oil processing industries. Reporting requirements, determination of permitted emission limits, actual emission accounting and compliance determination methods, as well as self-monitoring, environmental management Environmental management requirements such as accounting and pollution discharge permit implementation report, and put forward the prevention and control of industrial pollution in feed processing and vegetable oil processing Feasible technology reference requirements. Appendix A to Appendix D of this standard are informative appendices, and Appendix E is a normative appendix. This standard is issued for the first time. This standard is formulated by the Department of Environmental Impact Assessment and Emission Management and the Department of Regulations and Standards of the Ministry of Ecology and Environment. The main drafting organizations of this standard. Chinese Academy of Environmental Sciences, Light Industry Environmental Protection Research Institute, Chinese Academy of Agricultural Sciences. This standard was approved by the Ministry of Ecology and Environment on February 28, 2020. This standard will be implemented on February 28, 2020. This standard is interpreted by the Ministry of Ecology and Environment.1 Technical specifications for pollutant discharge permit application and issuanceAgricultural and sideline food processing industry-feed processing, vegetable oil processing industry1 Scope of applicationThis standard stipulates the basic conditions for the application and issuance of pollutant discharge permits for feed processing and vegetable oil processing industries. Reporting requirements, determination of permitted emission limits, actual emission accounting and compliance determination methods, as well as self-monitoring and environmental management Environmental management requirements such as the ledger and the implementation report of pollution permits, and proposed the prevention and control of industrial pollution in feed processing and vegetable oil processing. Technical reference requirements. This standard is applicable to guide feed processing and vegetable oil processing industrial pollutants on the national pollutant discharge permit management information platform Fill in the relevant application information, and it is also suitable for guiding the approval authority to review and determine the feed processing and vegetable oil processing industrial pollutants Permit requirements for pollution discharge permits. This standard applies to the air pollutants and water pollutants discharged by the feed processing and vegetable oil processing industries. License management. The production of feed additives is applicable to the food manufacturing industry-convenience Food, food and feed additive manufacturing industry" (HJ 1030.3). In feed processing and vegetable oil processing industrial pollutants, the "Emission Standard for Air Pollutants from Thermal Power Plants" (GB 13223) is implemented The pollution-producing facilities or discharge outlets are applicable to the "Technical Specifications for Application and Issuance of Pollution Permits for Thermal Power Industry"; The pollution-producing facilities and discharge outlets of the “Air Pollutant Discharge Standard” (GB 13271) are applicable to the “Pollution Discharge Permit Application and Issuance” Technical Specification for Boiler (HJ 953). Feed processing and planting that are not specified in this standard but discharge industrial waste water, waste gas or toxic and harmful pollutants prescribed by the state For other pollution-producing facilities and discharge outlets of pollutant oil processing industries, refer to the "General Rules for the Application and Issuance of Pollutant Discharge Permits" (HJ 942).2 Normative referencesThe content of this standard refers to the following documents or their clauses. For undated reference documents, their valid versions are applicable to this standard. GB 8978 Integrated Wastewater Discharge Standard GB 9078 Emission Standard of Air Pollutants for Industrial Furnaces GB 13223 Emission Standard of Air Pollutants for Thermal Power Plants GB 13271 Boiler Air Pollutant Emission Standard GB 14554 Emission Standard of Odor Pollutants GB 16297 Comprehensive Emission Standard of Air Pollutants GB 37822 Unorganized emission control standard of volatile organic compounds GB/T 10647-2008 Feed Industry Terminology HJ 91.1 Technical Specification for Wastewater Monitoring 23 Terms and definitions The following terms and definitions apply to this standard. 3.1 Pollutant emission unit of feed processing industry Refers to the production and processing of agricultural and sideline products and their processed products as raw materials to prepare farms and farmers to raise livestock, poultry, and water The feed product needed for the product or the pollutant discharge unit that feeds the feed product needed for feeding cats, dogs, ornamental fish, birds and other small animals. 3.2 Pollutant emission unit of vegetable oil processing industry Refers to the pollutant discharge units that use various edible or non-edible vegetable oils to produce fats and oils and are engaged in the processing of refined edible oils. 3.3 Permitted emission limits Refers to the maximum discharge concentration (rate) and discharge volume of pollutants that are allowed to be discharged by the pollutant discharge unit specified in the pollution discharge permit. 3.4 Special periods Refers to the environmental quality compliance plan formulated by the local people’s government according to law or other relevant environmental management regulations, The pollutant discharge of pollutants has special requirements for the time period, including the response period of heavy pollution weather and the winter prevention period. HJ 521 Wastewater Discharge Law Code (Trial) HJ 608 Code Rules for Pollutant Discharge Units HJ 860.2 Pollutant Discharge Permit Application and Issuance Technical Specification Agricultural and Sideline Food Processing Industry-Starch Industry HJ 942 General Rules of Technical Specifications for Pollution Discharge Permit Application and Issuance HJ 944 General Rules of Technical Specifications for Environmental Management Ledgers and Pollution Permit Implementation Reports of Pollutant Discharge Units (Trial) HJ 953 Sewage discharge permit application and issuance of technical specifications for boilers HJ 986 Technical Guide for Self-monitoring of Pollutant Discharge Units Agricultural and Sideline Food Processing Industry HJ 1030.3 Technical Specification for Application and Issuance of Pollution Discharge Permit Food Manufacturing Industry-Convenience Food, Food And feed additive manufacturing industry "List of Classification Management of Discharge Permits for Fixed Pollution Sources" "Administrative Measures for Pollution Discharge Permits (Trial)" (Ministry of Environmental Protection Order No. 48) "Technical Requirements for Standardized Remediation of Sewage Outlets (Trial)" (Environmental Supervision [1996] No. 470) "Announcement on Implementation of Special Emission Limits for Air Pollutants" (Announcement No. 14 of.2013 by the Ministry of Ecology and Environment) "Reply to Issues Concerning the Implementation of Special Emission Limits for Air Pollutants" (Huanban Qiqihan [2016] No. 1087) "Announcement on the Implementation of Special Emission Limits for Air Pollutants in Beijing-Tianjin-Hebei Air Pollution Transmission Channel Cities" (Environmental Protection Ministry of Health Announcement No. 9 of.2018) "Catalogue of Feed Ingredients" 3.5 Production period Refers to the time period from the start of production to the end of each production season of the pollutant discharge unit, calculated on a daily basis.4 Requirements for basic information of pollutant discharge units4.1 Basic principles Feed processing and vegetable oil processing industrial pollutants shall, in accordance with the requirements of this standard, establish a national pollutant discharge permit management information level. The station declaration system fills in the corresponding information form. Those that are not included in the reporting system, are required by the local ecological and environmental authorities, or If the pollutant discharge unit thinks it is necessary to fill in the report, it can add content by itself. Local ecological and environmental authorities at or above the municipal level with districts may increase the The content specified in the permit, and fill in the “local health authority with the right to issue” in the declaration system of the national pollution discharge permit management information platform Management content added by the environmental and environmental authorities" column. 4.2 Basic information of pollutants The basic information of the feed processing and vegetable oil processing industry pollutants should be filled with the name of the unit, whether rectification is required, and the permit for pollutant discharge Certificate management category, postal code, industry category (select "agricultural and sideline food processing industry-feed processing industry or vegetable oil Processing industry"), whether it is put into operation, the date of start-up, the latitude and longitude of the center of the production and operation site, and whether the location is environmentally sensitive Area (such as total phosphorus and total nitrogen control area, etc.), whether it is located in an industrial park, the name of the industrial park to which it belongs, the environmental impact assessment of the construction project Price document approval document number (recording number), local government’s identification of illegal projects or documenting document number, total number of major pollutants Document number of the quantity distribution plan, total chemical oxygen demand indicator (t/a), total ammonia nitrogen indicator (t/a), other pollution involved Total material indicators, etc. 4.3 Main products and production capacity 4.3.1 General principles The name of the main production unit, main process name, production facility name, production facility number, facility parameters, Product name, production capacity, unit of measurement, design year production time and others. The following "4.3.2-4.3.6" is required, "4.3.7" It is optional. 4.3.2 Names of main production units, main processes and production facilities Names of main production units, main processes and production facilities of feed processing and vegetable oil processing industries See Table 1.For the production of other products of feed processing and vegetable oil processing industries, please refer to Table 1.Sewage unit needs To fill in production units, production processes and production facilities other than those in Form 1, you can select the “other” item in the declaration system to fill in. 4.3.3 Production facility number Feed processing and vegetable oil processing industrial pollutants should fill in the internal production facility number or number and fill in according to HJ 608. 4.3.4 Product name 4.3.4.1 Feed processing industry According to the provisions of 6 of GB/T 10647-2008, the products of the feed processing industry include compound feed, concentrated feed, refined Feed supplement, pre-mixed feed (additive pre-mix, compound pre-mix, vitamin pre-mix, trace element pre-mix), other. 4.3.4.2 Vegetable oil processing industry The products of the vegetable oil processing industry include soybean oil, palm oil, rapeseed oil, peanut oil, cottonseed oil, sunflower oil, oil Tea seed oil, corn oil, rice bran oil, linseed oil, corn germ oil, sesame oil, pepper oil, tung oil, castor oil, catalpa oil, other. 4.3.5 Production capacity and measurement unit The production capacity is the design capacity of the main product, excluding the production capacity that the national or local can. If there is no design capacity data, it is calculated based on the average actual output of the past three years. The unit of measurement for production capacity is t/a. 4.3.6 Design year production time According to the environmental impact assessment documents and their approval, review opinions or in accordance with relevant national regulations Fill in the annual production time in the relevant certification materials that meet the requirements of the management and rectification. If there is no relevant document or the document is not clear To confirm the production time, fill in the actual production time. 4.3.7 Other If the feed processing and vegetable oil processing industry pollutant discharge units need to explain the content, they can fill in it. 4.4 Main raw and auxiliary materials and fuels 4.4.1 General principles The main raw and auxiliary materials should be filled in with the type of raw and auxiliary materials, the designed annual usage and the unit of measurement; others. The following "4.4.2-4.4.4" It is required, "4.4.5" is optional. 4.4.2 Types of raw and auxiliary materials and fuels According to the “Catalogue of Feed Ingredients”, the types of feed materials used for feed processing include grains and their processed products, oilseeds And its processed products, leguminous crop seeds and processed products, dairy products and their by-products, terrestrial animal products and their by-products, Fish, other aquatic organisms and their by-products, minerals, microbial fermentation products and by-products, and others. The types of auxiliary materials include feed Material additives (vitamins, trace elements, protein, functional additives), sewage treatment dosing agents, and others. The types of raw materials for vegetable oil processing include soybean, peanut, rapeseed, cottonseed, sesame, sunflower seed, linseed, and tea oil Seeds, olive oil, castor bean, tung oil seeds, others. The types of auxiliary materials include organic solvents (n-hexane, cyclohexane, etc.), liquid caustic soda, Activated clay, phosphoric acid, dosing chemicals for sewage treatment, and others. Fuel types include coal, heavy oil, diesel, natural gas, biomass, and others. 64.4.3 Designed annual usage and unit of measurement The designed annual usage is the annual usage of raw and auxiliary materials matching the production capacity. The measurement units of the designed annual consumption are t/a, Nm3/a, etc. 4.4.4 Fuel ash, sulfur, volatile and calorific value Fill in the fuel ash, sulfur, volatile and calorific value (low calorific value) according to the design value or the actual production value of the previous year. Burn Fill in the sulfur content for oil and gas (liquid fuel is based on sulfur content; gas fuel is based on total sulfur, which includes organic sulfur and inorganic sulfur) and Calorific value (low calorific value). The reported value of solid fuel and liquid fuel is based on the received basis. 4.4.5 Other Other content that needs to be explained by the feed processing and vegetable oil processing industry pollutants can be filled in. 4.5 Production and discharge nodes, pollutants and pollution prevention facilities 4.5.1 Wastewater 4.5.1.1 General principles The type of wastewater, pollution control items, discharge destination, discharge rules, pollution prevention facilities, and whether it is a feasible technology should be reported. Whether the technology, discharge port number, discharge port settings meet the requirements, and discharge port type. The following "4.5.1.2-4.5.1.6" is required. 4.5.1.2 Types of wastewater, pollution control items and pollution prevention facilities The types of waste water discharged by the feed processing and vegetable oil processing industries, pollution control items, discharge destinations and pollution prevention See Table 2 for the filled-in content of governance facilities. Water pollution control project of feed processing and vegetable oil processing industry pollutants according to GB 8978 determine. After the release of water pollutant discharge standards for food processing and manufacturing industries, pollutant discharge units or production facilities within the scope of their Regulations. Where there are stricter local emission standards, it shall be determined strictly in accordance with the local emission standards. 4.5.1.3 Emission destination and emission law Feed processing and vegetable oil processing industry pollutants should clarify the destination and rules of waste water discharge. The discharge destination is divided into no discharge; directly in......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HJ 1110-2020_English be delivered?Answer: Upon your order, we will start to translate HJ 1110-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of HJ 1110-2020_English with my colleagues?Answer: Yes. The purchased PDF of HJ 1110-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
