HJ 1104-2020 English PDFUS$1289.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. HJ 1104-2020: Technical specification for application and issuance of pollutant permit - Daily chemical products manufacturing industry Status: Valid
Basic dataStandard ID: HJ 1104-2020 (HJ1104-2020)Description (Translated English): Technical specification for application and issuance of pollutant permit - Daily chemical products manufacturing industry Sector / Industry: Environmental Protection Industry Standard Word Count Estimation: 56,558 Date of Issue: 2020-02-28 Date of Implementation: 2020-02-28 Issuing agency(ies): Ministry of Ecology and Environment HJ 1104-2020: Technical specification for application and issuance of pollutant permit - Daily chemical products manufacturing industry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Technical specification for application and issuance of pollutant permit - Daily chemical products manufacturing industry National Environmental Protection Standards of the People's Republic of China Technical specifications for pollutant discharge permit application and issuance Household chemical products manufacturing industry 20 2 0-0 2-2 8 release 20 2 0-0 2-2 8 Implementation Issued by the Ministry of Ecology and Environment Table of contentsForeword...ii 1 Scope of application...1 2 Normative references...1 3 Terms and definitions...2 4 Requirements for the basic information of pollutant discharge units...3 5 Corresponding discharge outlets in the production and discharge process and the determination method of the permitted discharge limit...15 6 Feasible technical requirements for pollution prevention...18 7 Self-monitoring management requirements...20 8 Requirements for preparation of environmental management ledger records and pollution discharge permit execution report...23 9 Accounting Method of Actual Emissions...28 10 Compliance Judgment Method...30 Appendix A (Informative Appendix) Reference Table of Pollution Prevention and Control Feasible Technologies...33 Appendix B (Informative Appendix) Reference Table for Environmental Management Ledger Records...35 Appendix C (Informative Appendix) Reference Table for Preparation of Pollution Discharge Permit Implementation Report...40ForewordIn order to implement the "Environmental Protection Law of the People's Republic of China", "The Air Pollution Prevention Law of the People's Republic of China", "China The Water Pollution Prevention and Control Law of the People’s Republic of China, the Soil Pollution Prevention and Control Law of the People’s Republic of China and other laws and regulations, the Office of the State Council Department’s Notice on Issuing the Implementation Plan for the Control of Pollutant Discharge Permit System (Guobanfa [2016] No. 81) and the "Pollution Permit Manageable Measures (for Trial Implementation)" (Ministry of Environmental Protection Order No. 48) to improve the technical support system for pollutant discharge permits, guidance and regulations This standard is formulated for the application and issuance of industrial pollutant discharge permits for the manufacture of daily chemical products. This standard stipulates the basic conditions for the application and issuance of the pollutant discharge permit of the industrial pollutant discharge unit of the daily chemical product manufacturing industry. Requirements, allowable emission limit determination, actual emission accounting and compliance determination methods, as well as self-monitoring, environmental management Environmental management requirements such as accounting and pollution discharge permit implementation report, and put forward feasible technologies for the prevention and control of industrial pollution in the manufacture of daily chemical products Claim. Appendix A to Appendix C of this standard are informative appendices. This standard is issued for the first time. This standard is formulated by the Department of Environmental Impact Assessment and Emission Management and the Department of Regulations and Standards of the Ministry of Ecology and Environment. The main drafting organizations of this standard. Light Industry Environmental Protection Research Institute, China Laundry Products Industry Association, China Environmental Science Research Institute, China Fragrance, Fragrance and Cosmetics Industry Association, Light Industry Hangzhou Electromechanical Design and Research Institute Co., Ltd. Clean Care Products Industry Association. This standard was approved by the Ministry of Ecology and Environment on February 28, 2020. This standard will be implemented on February 28, 2020. This standard is interpreted by the Ministry of Ecology and Environment.1 Technical specifications for pollutant discharge permit application and issuanceHousehold chemical products manufacturing industry1 Scope of applicationThis standard stipulates the basic conditions for the application and issuance of the pollutant discharge permit of the industrial pollutant discharge unit of the daily chemical product manufacturing industry. Requirements, allowable emission limit determination, actual emission accounting and compliance determination methods, as well as self-monitoring, environmental management Environmental management requirements such as accounting and pollution discharge permit implementation report, and put forward feasible technical requirements for the prevention and control of industrial pollution in the manufacture of daily chemical products. This standard is applicable to guide the daily chemical product manufacturing industrial pollutant units to fill in the national pollutant discharge permit management information platform Report relevant application information, which is suitable for guiding the issuing authority to review and determine the pollutant discharge permit of the industrial pollutant discharge unit of the daily chemical product manufacturing industry Licensing requirements. This standard is applicable to the permits for the discharge of water pollutants and air pollutants discharged by the industrial pollutant discharge unit of the daily chemical product manufacturing industry Management, specifically including soap and detergent manufacturing (C2681) and manufacturing in the "Classification of National Economic Industries" (GB/T 4754) Spice and flavor manufacturing (C2684). In the household chemical product manufacturing industrial sewage unit, the soap (including oil The production of fatty acid and glycerin contained in soap, soap noodles, soap powder) is applicable to the production of this standard. Industrial fatty acids, industrial fatty amines, surfactants, as well as special chemical products such as turpentine, rosin, and forest oils The pollution-producing facilities and discharge outlets for the production of chemical products shall be applicable to the "Special chemical product manufacturing process Industry" (HJ 1103); pollution-producing facilities or discharge outlets that implement the "Boiler Air Pollutant Emission Standard" (GB 13271), Applicable to "Sewage Discharge Permit Application and Issuance Technical Specification Boiler" (HJ 953). This standard does not make provisions, but discharges industrial waste water, waste gas, or daily chemicals that are toxic and harmful pollutants specified by the state For other pollution-producing facilities and discharge outlets of the product manufacturing industry, refer to the "General Rules for the Application and Issuance of Pollutant Discharge Permits" (HJ 942).2 Normative referencesThe content of this standard refers to the following documents or their clauses. For undated references, the effective version is suitable Used in this standard. GB 8978 Integrated Wastewater Discharge Standard GB 13271 Boiler Air Pollutant Emission Standard GB 14554 Emission Standard of Odor Pollutants GB 16297 Comprehensive Emission Standard of Air Pollutants GB 18597 Pollution Control Standard for Hazardous Waste Storage GB 18599 General industrial solid waste storage and disposal site pollution control standards GB 37822 Unorganized emission control standard of volatile organic compounds GB/T 16157 Determination of particulate matter in exhaust from stationary sources and sampling method for gaseous pollutants HJ 38 Determination of total hydrocarbons, methane and non-methane total hydrocarbons in stationary pollution sources gas chromatography 2HJ/T 55 Technical Guidelines for Monitoring Unorganized Emissions of Air Pollutants HJ 91.1 Technical Specification for Wastewater Monitoring HJ/T 353 Water Pollution Source Online Monitoring System Installation Technical Specification (Trial) HJ/T 354 Technical Specification for Acceptance of Online Water Pollution Source Monitoring System (Trial) HJ/T 355 Water Pollution Source Online Monitoring System Operation and Assessment Technical Specification (Trial) HJ/T 356 Technical Specification for Data Validity Judgment of Online Water Pollution Source Monitoring System (Trial) HJ/T 373 Fixed pollution source monitoring quality assurance and quality control technical specifications (trial implementation) HJ/T 397 Fixed source exhaust gas monitoring technical specification HJ 494 Technical Guide for Water Quality Sampling HJ 495 Technical Regulations for Water Quality Sampling Scheme Design HJ 521 Wastewater Discharge Law Code (Trial) HJ 604 Determination of Ambient Air Total Hydrocarbons, Methane and Non-Methane Total Hydrocarbons Direct Sampling-Gas Chromatography HJ 608 Code Rules for Pollutant Discharge Units HJ 819 General Rules of Technical Guidelines for Self-monitoring of Pollutant Discharge Unit HJ 942 General Rules of Technical Specifications for Pollution Discharge Permit Application and Issuance HJ 944 General Rules of Technical Specifications for Environmental Management Ledger and Pollution Discharge Permit Implementation Report of Pollutant Discharge Units (Trial) HJ 953 Sewage discharge permit application and issuance of technical specifications for boilers "Notice of the State Council on Printing and Distributing the Three-Year Action Plan for Winning the Blue Sky Defense War" (Guo Fa [2018] No. 22) "National Hazardous Waste List" "List of Classification Management of Discharge Permits for Fixed Pollution Sources" "Administrative Measures for Pollution Discharge Permits (Trial)" (Ministry of Environmental Protection Order No. 48) "Technical Requirements for Standardized Remediation of Sewage Outlets (Trial)" (Environmental Supervision [1996] No. 470 of the State Environmental Protection Administration) "Announcement on the Implementation of Special Emission Limits for Air Pollutants" (Announcement No. 14 of.2013 by the Ministry of Environmental Protection) "Reply to Issues Concerning the Implementation of Special Emission Limits for Air Pollutants" (Huanban Qiqihan [2016] No. 1087) "List of Priority Controlled Chemicals" (Ministry of Environmental Protection, Ministry of Industry and Information Technology, National Health and Family Planning Commission (Announcement No. 83 of.2017) "Announcement on the Implementation of Special Emission Limits for Air Pollutants in Beijing-Tianjin-Hebei Air Pollution Transmission Channel Cities" (Environmental Protection Ministry Announcement No. 9 of.2018)3 Terms and definitionsThe following terms and definitions apply to this standard. 3.1 Pollutant emission unit of daily chemical products manufacturing industry Refers to the sewage disposal unit engaged in the manufacture of soap and detergents, spices, flavors and other products. The manufacture of soap and detergent refers to applying to the skin, utensils, fabrics, hard surfaces by spraying, smearing, soaking, etc. Rinse and wash, it has the functions of cleaning, decontamination, penetration, emulsification, dispersion, care, disinfection and sterilization. It is widely used in household, Products in the fields of personal hygiene, fabric cleaning and care, industrial cleaning, public facilities and environmental hygiene cleaning (solid, liquid, 3) Manufacturing of powders, pastes, tablets, capsules, etc.). Spice manufacturing refers to the production of materials with aroma and (or) fragrance, including natural and synthetic fragrances, for blending Fragrance and other uses. Flavor manufacturing refers to the use of a variety of natural flavors and (or) synthetic flavors as the main raw materials, together with other auxiliary materials according to reasonable A complex mixture with a certain scent prepared by the formula and craftsmanship, mainly used for daily use, edible and other flavored products Production Activities. 3.2 Natural fragrance and flavor ingredient Using plants, animals, microorganisms or intermediates obtained from processing as raw materials, through physical methods, enzymatic methods, microbial methods or Spices processed by traditional food technology. 3.3 Synthetic fragrance and flavor substance Substances with clear aroma and/or fragrance characteristics formed by chemical synthesis. 3.4 Thermal reaction fragrance compound and flavorings Using protein nitrogen sources, carbohydrate sources, fats or fatty acid sources as the main raw materials The product obtained from the reaction under certain conditions (specific temperature and time), with or without addition of spices and (or) permitted by regulations Excipients, complex mixtures with specific aromas and/or fragrances prepared by reasonable blending. 3.5 Non-methane hydrocarbons (NMHC) Using the specified monitoring method, the hydrogen flame ionization detector responds to the total amount of gaseous organic compounds other than methane And, in terms of the mass concentration of carbon. 3.6 permitted emission limits Refers to the maximum discharge concentration (or discharge rate) and discharge volume of pollutants that are allowed to be discharged by the pollutant discharge unit as specified in the pollution discharge permit. 3.7 special periods Refers to the environmental quality compliance plan established by the local people’s government in accordance with the law or other relevant environmental management documents. The pollutant discharge situation of the polluting unit has special requirements, including the period of response to heavy pollution weather. 3.8 production period Refers to the period of time from the start of production to the end of each production season of the daily chemical product manufacturing industrial sewage unit, calculated on a daily basis.4 Requirements for basic information of pollutant discharge units4.1 Basic principles The pollutant discharge unit of the daily chemical product manufacturing industry shall apply for the national pollutant discharge permit management information platform in accordance with the requirements of this standard. Report the system to fill in the corresponding information table.4 The local ecological and environmental authorities at or above the municipal level with districts may increase theThe content specified in the permit, and fill in the “local health authority with the right to issue” in the declaration system of the national pollution discharge permit management information platform Management content added by the environmental and environmental authorities" column. 4.2 Basic information of pollutants The basic information of the pollutant discharge unit in the daily chemical product manufacturing industry should be filled in with the name of the unit, whether it needs to be corrected, and the discharge permit management. Management category, postal code, industry category, whether to start production, date of production, latitude and longitude of the center of the production Whether it belongs to an environmentally sensitive area (such as a key atmospheric control area, a total phosphorus and total nitrogen control area, etc.), whether it is located in an industrial park, Industrial park name, construction project environmental impact assessment document approval (review) comment number (record number), local government The document number of the identification or filing document of the illegal project, the document number of the total distribution plan of major pollutants, and the total particulate matter indicator (T/a), total sulfur dioxide indicator (t/a), total nitrogen oxide indicator (t/a), total chemical oxygen demand indicator (t/a), Total ammonia nitrogen indicator (t/a), total indicators of other pollutants involved, etc. When filling in the industry category in the basic information on the national sewage permit management information platform, the daily chemical product manufacturing industry The pollutant discharge unit fills in "Chemical Raw Material and Chemical Product Manufacturing (C26)" and "Daily Chemical Product Manufacturing" according to the actual situation. (C268)" "Soap and detergent manufacturing (C2681)", "Perfume and flavor manufacturing (C2684)" industry categories. 4.3 Main products and production capacity 4.3.1 General principles Daily chemical product manufacturing industrial pollutants should fill in the name of the main production unit, main process name, and production facility name Scale, production facility number, facility parameters, product name, production capacity, unit of measurement, design year production time and others. The following "4.3.2~4.3.6" are required items, and "4.3.7" are optional items. 4.3.2 Names of main production units, main processes and production facilities The names of main production units, main processes and production facilities of household chemical products manufacturing industrial pollutants are shown in the table 1~Table 5.For the production of other products in the daily chemical product manufacturing industry, please refer to the report. The pollutant discharge unit needs to fill in the forms other than Form 1~ The production unit, production process and production facilities of the company can be filled in by selecting the "other" item in the declaration system. 4.3.3 Production facility number Daily chemical product manufacturing industrial pollutant discharge unit shall fill in the internal production facility number, or number and fill in according to HJ 608. 4.3.4 Product name a) Soap and detergent manufacturing 7.Soap, soap, soap powder, soap granules, synthetic washing powder, liquid detergent, etc. b) Manufacturing of spices and flavors Natural flavors, synthetic flavors, thermally reactive flavors, non-thermally reactive flavors, and others. 4.3.5 Production capacity and measurement unit Production capacity is the design capacity of the main products, excluding the capacity eliminated or banned by the state or local government. Production capacity The unit of force measurement is t/a. 4.3.6 Design year production time According to the environmental impact assessment documents and their approval (review) opinions or in accordance with relevant national regulations Fill in the annual production time in the relevant certification materials that meet the requirements of the management and rectification. If there is no relevant document or the document is not clear To confirm the production time, fill in the actual production time. 4.3.7 Other If the household chemical product manufacturing industrial pollutant discharge unit has other content that needs to be explained, it can add it by itself. 4.4 Main raw and auxiliary materials and fuels 4.4.1 General principles The main raw and auxiliary materials and fuels should be filled with the types of raw and auxiliary materials and fuels, the designed annual usage and the unit of measurement, poisonous and harmful Substance composition and proportion, among which toxic and hazardous substances refer to the list of toxic and hazardous substances included in the "List of Priority Control Chemicals" Chemical substances. Fuel composition includes ash, sulfur, volatile, calorific value, and others. The following "4.4.2~4.4.5" are required Item, "4.4.6" is optional. 4.4.2 Types of raw and auxiliary materials and fuels 4.4.2.1 Raw and auxiliary materials a) Soap and detergent manufacturin......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HJ 1104-2020_English be delivered?Answer: Upon your order, we will start to translate HJ 1104-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of HJ 1104-2020_English with my colleagues?Answer: Yes. The purchased PDF of HJ 1104-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
