HJ 1038-2019 English PDFUS$1179.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email. HJ 1038-2019: Technical specification for application and issuance of pollutant permit - Hazardous waste incineration Status: Valid
Basic dataStandard ID: HJ 1038-2019 (HJ1038-2019)Description (Translated English): Technical specification for application and issuance of pollutant permit - Hazardous waste incineration Sector / Industry: Environmental Protection Industry Standard Word Count Estimation: 51,599 Date of Issue: 2019-08-27 Date of Implementation: 2019-08-27 Issuing agency(ies): Ministry of Ecology and Environment HJ 1038-2019: Technical specification for application and issuance of pollutant permit - Hazardous waste incineration---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Technical specification for application and issuance of pollutant permit - Hazardous waste incineration National Environmental Protection Standard of the People's Republic Sewage permit application and issuance technical specifications Hazardous waste incineration Technical specification for application and issuance of Pollutant permit-Hazardous waste incineration Published on.2019-8-27 2019-8-27 Implementation Ministry of Ecology and Environment released i directory Foreword...ii 1 Scope...1 2 Normative references...1 3 Terms and Definitions...2 4 Basic requirements for reporting the sewage disposal unit... 2 5 How to determine the discharge port and the allowable emission limit for the production and discharge link...11 6 Feasible technical requirements for pollution prevention...13 7 Self-monitoring management requirements...14 8 Environmental Management Account and Emission Permit Implementation Reporting Requirements...16 9 Actual emissions accounting method...20 10 Compliance Determination Method...22 Appendix A (informative appendix) Possible technical reference for pollution prevention and control...24 Appendix B (informative appendix) Environmental Management Accounting Record Reference Table...27 Appendix C (informative appendix) Form of implementation of pollutant discharge permit...33 Appendix D (informative) Recommended method for accounting for actual discharge of wastewater pollutants...47 ForewordTo implement the Law of the People's Republic of China on Environmental Protection, the Law of the People's Republic of China on Prevention and Control of Atmospheric Pollution, Law of the People's Republic of China on Prevention and Control of Water Pollution, Law of the People's Republic of China on Prevention and Control of Soil Pollution, etc. Notice of the Office on Printing and Distributing the Implementation Plan for Controlling Pollutant Discharge Permit System (Guo Ban Fa [2016] No. 81) and "Sewage Disposal Manageable Measures (Trial) (Organization of the Ministry of Environmental Protection No. 48), improve the technical support system for sewage permit, guidance and regulations This standard is formulated for the application and issuance of pollutant discharge permits for hazardous waste incineration and discharge units. This standard stipulates the requirements for the basic situation of the application and issuance of the pollutant discharge permit for hazardous waste incineration and discharge units. Emission limit determination, actual emissions accounting and compliance determination methods, as well as self-monitoring, environmental management ledgers and discharge permits The environmental management requirements such as the implementation report can be verified, and the feasible technical requirements for pollution prevention and control of hazardous waste incineration and sewage disposal units are put forward. Appendix A to Appendix D of this standard are informative annexes. This standard is the first release. This standard is formulated by the Department of Environmental Impact Assessment and Emission Management of the Ministry of Ecology and Environment, and the Department of Regulations and Standards. This standard is mainly drafted by. Environmental Engineering Evaluation Center of the Ministry of Ecology and Environment, Shenyang Environmental Science Research Institute. This standard is approved by the Ministry of Ecology and Environment on August 27,.2019. This standard has been implemented since August 27,.2019. This standard is explained by the Ministry of Ecology and Environment. 1Sewage permit application and issuance technical specification Hazardous waste incineration1 Scope of applicationThis standard stipulates the requirements for the basic situation of the application and issuance of the pollutant discharge permit for hazardous waste incineration and discharge units. Emission limit determination, actual emissions accounting and compliance determination methods, as well as self-monitoring, environmental management ledgers and discharge permits The environmental management requirements such as the implementation report can be verified, and the technical requirements for pollution prevention and control are put forward. This standard applies to the guidance of hazardous waste The incineration and pollutant discharge unit shall fill in the relevant application information in the National Pollution Discharge License Management Information Platform (hereinafter referred to as the Pollution Discharge Permit Platform). It is applicable to guide the issuing authority to review and determine the permit requirements for the pollutant discharge permit of the pollutant discharge unit. This standard is applicable to the discharge of atmospheric pollutants and water pollutants from hazardous waste (including medical waste) incineration and discharge units. License management. This standard applies to hazardous waste centralized incineration disposal units. The sewage disposal unit self-built hazardous waste incineration disposal facilities and If the application for the main industry sewage permit and the technical specifications for the issuance are not relevant, it may be implemented with reference to this standard. Hazardous Waste The technical definition of incineration disposal is implemented in accordance with the Technical Guidelines for Hazardous Waste Disposal Engineering (HJ 2042). This standard does not stipulate but discharges industrial waste gas, waste water or nationally designated toxic and harmful pollutants. The facilities for the production of pollutants and discharges shall be implemented in accordance with the General Rules for the Application and Issuance of Pollution Discharge Permits (HJ 942).2 Normative referencesThis standard refers to the following documents or their terms. For undated references, the valid version applies to this standard. GB 8978 Integrated Wastewater Discharge Standard GB 14554 Odor Pollutant Emission Standard GB 16297 Integrated emission standards for atmospheric pollutants GB 18484 Hazardous Waste Incineration Pollution Control Standard HJ 75 fixed pollution source flue gas (SO2, NOX, particulate matter) continuous monitoring technical specifications HJ 76 Technical requirements and test methods for continuous monitoring system for fixed pollution source flue gas (SO2, NOX, particulate matter) HJ/T 91 Surface Water and Wastewater Monitoring Technical Specifications HJ/T 92 Water Pollutant Total Monitoring Technical Specification HJ/T 176 Technical Specifications for Construction of Hazardous Waste Central Incineration Disposal Project HJ/T 365 hazardous waste (including medical waste) incineration disposal facilities dioxin emission monitoring technical specifications HJ 608 sewage unit coding rules HJ 819 General Guidelines for Self-Monitoring Technical Units of Sewage Units 2HJ 942 General requirements for application and issuance of pollution discharge permits HJ 944 Sewage unit environmental management ledger and discharge permit implementation report technical specification general (trial) HJ 2042 Technical Guidelines for Hazardous Waste Disposal Engineering Measures for the Administration of Hazardous Waste Transfer Joint Orders (Order No. 5 of the State Environmental Protection Administration) Measures for the Management of Pollution Discharge Permits (Trial) (Order No. 48 of the Ministry of Environmental Protection) Technical Requirements for Standardized Remediation of Sewage Discharges (Trial) (Environmental Supervision [1996] No. 470) Measures for the Operation and Management of Automatic Monitoring Facilities for Pollution Sources (Huanfa [2008] No. 6)3 Terms and definitionsThe following terms and definitions apply to this standard. 3.1 Pollutant emission unit of hazardous waste incineration Refers to a hazardous waste disposal unit that incinerates and burns hazardous waste to decompose it and is harmless. 3.2 Permitted emission limits Refers to the maximum emission concentration (or rate) and emissions of pollutants allowed by the discharge unit specified in the discharge permit. 3.3 "3T E" combustion control "3T E" combustion control technique Refers to controlling the combustion temperature (Temperature), smoke residence time (Time), turbulence (Turbulence), Excess-Air is beneficial to the decomposition of harmful substances in incineration and reduces the formation of pollutants such as dioxins in incineration. the way. 3.4 Abnormal situation Refers to abnormal working conditions of production facilities (such as incinerator ovens, start-stop furnaces, equipment maintenance, etc.) and pollution prevention (control) The application is not normal (such as the failure to achieve the desired treatment effect or synchronous operation rate, etc.).4 Basic requirements for reporting the discharge unit4.1 General principles The pollutant discharge unit shall fill in the corresponding information on the discharge permit platform in accordance with the requirements of this standard. Not included in the sewage permitting platform, If the local ecological environment competent department has regulations that need to be reported or the pollutant discharge unit considers it necessary to fill in the report, it may add the content by itself. 3 The local ecological environment competent department at or above the municipal level in the district may increase the need for sewage discharge according to local regulations on environmental protection. The contents stated in the permit, and filled in the sewage permitting platform, "the increase of the local ecological environment authority with nuclear powers "Contents" column. 4.2 Basic information of sewage disposal units The basic information of the pollutant discharge unit should be filled in the name of the unit, whether it needs to be corrected, the type of sewage permit management, postal code, Industry category, whether it is put into production and the date of production, whether the center of the production and operation site is latitude and longitude, and whether the location is an environmentally sensitive area (such as Atmospheric key control area, total phosphorus total nitrogen control area, etc.), whether it is located in the industrial park and its industrial park name, environmental impact The evaluation approval document number (record number), the local government's identification of the illegal project or the filing document number, major pollution Total amount allocation plan document number, total particulate matter index (t/a), total sulfur dioxide index (t/a), total nitrogen oxides Volume index (t/a), total chemical oxygen demand index (t/a), total ammonia nitrogen index (t/a), total amount of other pollutants involved Indicators, etc. When reporting the industry category, the hazardous waste incineration and discharge unit should select the “ecological protection and environmental management industry (N77)” The “7724 Hazardous Waste Management” category in the Environmental Management Industry (N772). 4.3 Main products and production capacity 4.3.1 General principles The pollutant discharge unit shall report the main production unit name, main process name, and main process name in the discharge permit platform according to the requirements of this standard. Production facility name, production facility number, facility parameters, product name, production capacity and unit of measurement, annual production time and other information. 4.3.2 Main production units, main processes, production facilities and facility parameters See Table 1 for the main production units, main processes, production facilities and facility parameters of the sewage disposal unit. 4 Table 1 List of main production units, main processes, production facilities and facilities parameters Main production unit main process production facility facility parameter measurement unit Incineration production unit incineration and waste heat utilization Incineration and waste heat Utilization system Incinerator system Incinerator type (rotary kiln, Pyrolysis furnace, other) Disposal capacity t/d Incinerator temperature °C Second burner temperature °C Three burner temperature (if any) °C Smoke retention time s Combustion efficiency% Incineration removal rate% Thermal burn rate% Waste heat boiler (if any) Rated evaporation t/h Waste heat generator set (if any) Rated power MW Softened water preparation facility processing capacity t/h Loading and unloading pre-location Unit Loading and unloading Pretreatment Analytical laboratory // Physical, chemical, and curing/stabilization facility // Compatibility pit (feed hopper) design effective volume m3 Storage Hazardous waste storage (zone) incineration storage Independent hazardous waste storage tank incineration storage Fuel tank or other fuel storage facility designed for effective volume m3 Deacidification storage tank (warehouse) designed effective volume m3 Denitrification storage tank (storage) (ammonia storage tank, liquid) Ammonia storage tank, urea storage tank) Design effective volume m3 Fly ash storage tank (bag) design effective volume t Fly ash, incineration residue storage area m2 Design and treatment capacity of integrated sewage treatment facilities in auxiliary unit sewage treatment plant t/d 4.3.3 Production Facility Number The sewage unit fills in the internal production facility number. If the sewage unit has no internal production facility number, it will enter according to HJ 608. Line number and report. 4.3.4 Production capacity and unit of measurement Production capacity for incineration disposal capacity and design of main product capacity for hazardous waste, excluding national or local governments Disposal or banned disposal capacity and capacity. The unit of measurement capacity is t/d; the measurement of thermal capacity in the main product capacity The unit is GJ/a, and the power capacity measurement unit is kWh/a. 4.3.5 Design annual production time According to the environmental impact assessment documents and approval opinions or the local government’s identification of the illegal projects or the burning of the filing documents The furnace year is reported in hours, and the unit is h. If there is no relevant document or the relevant content is not clearly defined in the document, follow the incinerator 5 The actual number of hours of use is reported. 4.3.6 Product Name Including electricity, heat, such as not involving electricity, heat and other products can not be reported. 4.3.7 Other If the pollutant discharge unit needs to explain the contents, it can be reported. 4.4 Main fuels and accessories 4.4.1 General principles The pollutant discharge unit shall report the main fuel and auxiliary materials, design and disposal in the pollutant discharge permitting platform according to the requirements of this standard. Consumption and measurement units, fuel and auxiliary materials information. 4.4.2 Type Type of fuel. hazardous waste, other solid/liquid/gas fuels (including coal, oil, gas, etc.). Excipient types. chemical agents added during the process and prevention of waste gas and wastewater pollution, including deacidification agents (hydrogen and oxygen) Sodium, calcium hydroxide, etc., denitrification agent (urea, ammonia, etc.), activated carbon, other alkalis, sodium salts, refractory materials, sewage Water treatment, dosing, etc. 4.4.3 Annual disposal (consumption) quantity and unit of measurement The unit of fuel disposal (consumption) is t/a or m3/a, and the unit of measurement for excipients is t/a. Fill in the design value. 4.4.4 Fuel and Excipient Information The incineration of hazardous waste is reported as moisture, ash, sulfur content, organic chlorine content, calorific value, and waste category. In the auxiliary (mixed) fuel, the coal is reported for ash, sulfur, volatile matter, and low calorific value. Fuel and gas to report sulfur The fraction (liquid fuel is based on sulfur; gaseous fuel is based on total sulfur, including organic sulfur and inorganic sulfur) and low calorific value. The solid fuel and liquid fuel fill values are based on the receiving base (the volatiles are reported as dry ash-free bases). The activated carbon is used to report the consumption of dangerous waste in the furnace, and the unit of measurement is kg/t. Fill in the design value. 4.5 Production and sewage disposal, pollutants and pollution prevention facilities 4.5.1 General principles The pollutant discharge unit shall separately report the information on the production and discharge of waste gas and waste water, pollutants and pollution prevention facilities. Exhaust gas includes production and discharge links corresponding to production facilities, types of pollutants, forms of emissions (organized, unorganized), and pollution Dyeing prevention facilities (name and process of pollution prevention facilities, numbering, whether it is feasible technology), organized discharge port number and name It is said that the discharge port setting meets the requirements and the type of discharge port. Wastewater includes wastewater category, pollutant type, pollution prevention facilities (name and process of pollution prevention facilities, number, design Application parameters, whether it is feasible technology), discharge destination, discharge port number and name, discharge port setting meet requirements and row 6 type of mouth release, etc. 4.5.2 Exhaust gas 4.5.2.1 Production and sewage links, types of pollutants, emission forms and pollution prevention facilities The pollutant discharge unit of the sewage unit, the type of pollutants, the form of discharge, the pollution prevention facilities and the type of discharge port are filled in. See Table 2. The types of pollutants are determined according to GB 18484, GB 16297, GB 14554 and other standards, and volatile organic compounds are The non-methane total hydrocarbons in GB 16297 are used as comprehensive control indicators, and the competent department of ecological environment under the State Council issues or revise the relevant After the implementation of the standards for the emission of organic matter, it is specified. Local pollutant discharge implementation standards have stricter requirements, from which they are specified. 4.5.2.2 Pollution Prevention Facility Number The pollution prevention facility number can be reported to the internal number of the sewage disposal unit. If the sewage disposal unit has no internal number, it is based on HJ 608. Number and fill in the report. 4.5.2.3 Is it a viable technology? Refer to Chapter 6 of this standard, “Technical Requirements for Pollution Prevention and Control”. 4.5.2.4 Organized vent number The number of organized discharges should be reported to the existing number of the local ecological environment authority. If there is no existing number, then according to HJ 608 is numbered and reported. 4.5.2.5 Discharge port setting requirements According to the "Technical Requirements for Standardization and Remediation of Sewage Discharge Ports (Trial)", the relevant discharge standards implemented by the pollutant discharge unit The provisions of the standardized setting and local related management requirements, and report whether the exhaust gas di......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HJ 1038-2019_English be delivered?Answer: Upon your order, we will start to translate HJ 1038-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of HJ 1038-2019_English with my colleagues?Answer: Yes. The purchased PDF of HJ 1038-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
