GBZ5169.48-2024 English PDF

US$594.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GBZ5169.48-2024: Fire hazard testing for electric and electronic products - Part 48: Glowing/hot-wire based test methods - Hot wire coil test method - Apparatus, verification, test method and guidance
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/Z 5169.48-2024	594	Add to Cart	5 days	Fire hazard testing for electric and electronic products - Part 48: Glowing/hot-wire based test methods - Hot wire coil test method - Apparatus, verification, test method and guidance	Valid

Similar standards

GB/T 5169.19   GB/T 5169.21   GB/T 5169.16   GB/T 5169.49   GB/T 5169.47   GB/T 5169.44   

Basic data

Standard ID: GB/Z 5169.48-2024 (GB/Z5169.48-2024)
Description (Translated English): Fire hazard testing for electric and electronic products - Part 48: Glowing/hot-wire based test methods - Hot wire coil test method - Apparatus, verification, test method and guidance
Sector / Industry: National Standard
Classification of Chinese Standard: K04
Classification of International Standard: 13.220.40; 29.020
Word Count Estimation: 30,338
Date of Issue: 2024-09-29
Date of Implementation: 2025-04-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GBZ5169.48-2024: Fire hazard testing for electric and electronic products - Part 48: Glowing/hot-wire based test methods - Hot wire coil test method - Apparatus, verification, test method and guidance

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB /Z 5169.48-2024.Fire hazard testing for electric and electronic products Part 48.Basic test methods for glowing wire/hot wire Hot wire loop test apparatus, confirmation test methods and guidelines ICS 13.220.40;29.020 CCSK04 Guiding technical documents of the People's Republic of China on national standardization Fire hazard test for electrical and electronic products Part 48.Basic test methods for glow-wire/hot-wire Hot wire loop test equipment, confirmation test methods and guidelines (IEC /T S60695-2-20.2021,Firehazardtesting-Part 2-20.Glowing/hot-wire Published on September 29, 2024, implemented on April 1, 2025 State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Test Principle 3 5 Device 4 6 Sample 7 7 State Adjustment 8 8 Test Procedure 8 9 Observation and Measurement11 10 Evaluation of test results 12 11 Test Report 12 Appendix A (Informative) Guidelines for effectively wrapping the heating wire around the specimen 13 Appendix B (Normative) Hot Wire Test (HWCT) --- Performance Level Category (PLC) 14 Appendix C (Informative) Standard curve for determining test current (Ic) drawn by a spreadsheet program 15 Appendix D (Informative) Precision 16 Appendix NA (Informative) Components of the national standard "Fire hazard test for electrical and electronic products" 20 Reference 22 Figure 1 Layout of test fixture (example) 4 Figure 2 Sample winding style 4 Figure 3 Sample fixing device (example) 5 Figure 4 Heating wire winding device (example) 6 Figure 5 Experimental circuit layout for heating wire calibration 7 Figure 6 Calibration curve 10 Figure 7 Decision Tree 11 Figure A.1 Illustration of winding method A13 Figure A.2 Illustration of winding method B 13 Figure C.1 Tabular calibration curve for determining Ic15 Table 1 Nominal Thickness Tolerance 7 Table B.1 Hot Wire Test (HWCT) --- Performance Level Category (PLC) 14 Table D.1 Test results of material 1A 16 Table D.2 Test results of material 1B 17 Table D.3 Test results of material 2A 17 Table D.4 Test results of material 2B 18 Table D.5 Test results of material 3 18 Table D.6 Test results of material 4 19 Table D.7 PLC level in cycle test 19

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 48 of "Fire Hazard Tests for Electrical and Electronic Products". See Appendix NA for part. This document is equivalent to IEC /T S60695-2-20.2021 "Fire hazard tests - Part 2-20.Basic test method for glowing wire/hot wire" The document type was adjusted from IEC technical specifications to my country's national standardization. Guiding technical documents. The following minimal editorial changes were made to this document. --- To be consistent with the existing series of standards, the name of this document is changed to "Fire hazard tests for electric and electronic products - Part 48.Hot Basic test methods for wire/hot wire. hot wire coil test equipment, confirmation test methods and guidelines"; --- Move some informative references in the normative references in Chapter 2 to the references; --- Add informative appendix NA to list the published parts of "Fire hazard test for electric and electronic products". Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Technical Committee for Standardization of Fire Hazard Testing for Electrical and Electronic Products (SAC/TC300). This document was drafted by. China Electric Power Research Institute Co., Ltd., Hisense Rongsheng (Guangdong) Refrigerator Co., Ltd., Shenzhen Inspection Institute of Quarantine Science, Tsinghua University Shenzhen International Graduate School, Kingfa Technology Co., Ltd., Weikai Testing Technology Co., Ltd., Guodian Nanfang Beijing Automation Co., Ltd., Huangpu Customs Technology Center, China Academy of Building Materials (Beijing) Testing and Certification Co., Ltd., Huitong New Materials Co., Ltd. China Southern Power Grid Co., Ltd.,... Huadian Telecom Co., Ltd., China Household Electrical Appliances Research Institute, Beijing Tairui Testing Technology Service Co., Ltd., Honor Terminal Co., Ltd., China Southern Power Grid Co., Ltd. Ultra-high Voltage Transmission Company Dali Bureau, Tianjin Jinhang Computing Technology Research Institute, Shenzhen Customs Industrial Products Inspection Technology Technology Center. The main drafters of this document are. Jie Ganxin, He Shengtao, Zhou Yi, Jia Zhidong, Tan Jiaxiang, Liu Xiuzhen, Gui Yi, Yang Zhiyong, Zheng Shaofeng, Wan Cheng, Chen Xin, Deng Jun, Zhang Yuanqin, Wang Peiru, Peng Qiang, Gao Lingsong, Zou Weilong, Xie Zhicheng, Wang Xilin, Liu Shizeng, Zhang Tuqiang, and Xie Kaiyu.

Introduction

The design of all electrical and electronic products needs to consider the risk of fire and potential fire hazards. The design of components, circuits and parts The purpose of material selection is to reduce the potential fire risk to an acceptable level even if foreseeable misuse, malfunction or failure occurs. The purpose of the Fire Hazard Test for Electrical and Electronic Products is to save lives by reducing the number of fires or the severity of fires. It can do so by. ---Prevent ignition of live parts as much as possible. If ignition occurs, limit the scope of the fire to the casing of the electrical and electronic products; --- Minimize the spread of flames outside the product enclosure and the generation of harmful combustion products such as heat, smoke, toxic or corrosive gases. Minimize harmful impact. The Fire Hazard Test for Electrical and Electronic Products now consists of 40 parts, divided into three major areas. --- Fire hazard test assessment guidelines and terminology standards, including 1 terminology and 8 assessment guidelines, the purpose is to provide a professional field Provide guidance and reference procedures for fire hazard assessment; ---Fire test standards, including 5 basic glow wire/hot wire test methods, 9 flame test methods, and 2 abnormal heat resistance Test methods, 1 arc ignition test method, the purpose is to introduce suitable for electrical and electronic equipment manufacturers and testing institutions to use A small-scale test method using a specific heat source to simulate the heat source that causes a fire; ---Hazard assessment criteria for combustion flow, including 2 items of corrosiveness, 2 items of smoke blurring, 5 items of toxicity, 3 items of heat release, and 2 items of flame surface The purpose is to provide measurement of combustion toxicity, corrosiveness, smoke haze and heat release of electrical and electronic products and their materials. Guidelines and current technical status of test methods. This test method is applicable to solid electrical insulating materials for which specimens are available. It is applicable to materials that do not deform during the preparation of the specimens, especially In particular, the material of the specimen is wrapped with heating wire in accordance with 5.5. Deformations for which this test method is not applicable include. a) During the time when the heating wire is wrapped around the specimen, the specimen bends laterally or longitudinally, or twists, to an extent visible to the eye; or b) Visible indentation of the specimen by the heating wire. The classification method described in Appendix B can be used for pre-selection of materials. Fire hazard test for electrical and electronic products Part 48.Basic test methods for glow-wire/hot-wire Hot wire loop test equipment, confirmation test methods and guidelines

1 Scope

This document describes a test method applicable to test specimens made of solid electrical insulating material. The test measures the The time required for ignition when the heat of the heating wire on it is affected. If the sample produces molten droplets, record the time of dripping. The test method can be used to provide quality assurance classification and pre-selection of product materials as described in IEC 60695-1-30, or to verify the quality of finished products. The minimum grade required for the material to be used. This document is intended for use by product committees in the preparation of standards in accordance with the principles set out in IEC Guide 104 and ISO /IEC Guide 51. One of the tasks of the product committee is to use this series of standards wherever applicable when writing standards in this field. Unless otherwise specifically mentioned or listed in the standard, the requirements, test methods or test conditions of this document shall not apply.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 5169.1-2015 Fire hazard testing for electric and electronic products Part 1.Fire hazard testing terminology (IEC 60695-4. 2012, IDT) Note. GB/T 9352-2008 Compression moulding of thermoplastic material specimens (ISO 293.2004, IDT) ISO 294 (all parts) Plastics-Injection moulding of thermoplastic materials Note. GB/T 17037 (all parts) Plastics - Preparation of injection moulding test specimens for thermoplastic materials [ISO 294 (all parts)] Note. GB/T 5471-2008 Plastics Compression molding of thermosetting plastic specimens (ISO 295.2004, IDT) ISO 13943.2023 Fire safety vocabulary testspecimens) IEC 60695-1-30 Fire hazard testing Part 1-30.Guidelines for fire hazard assessment of electrical products Preselection test procedures (Fire Note. GB/T 5169.9-2021 Fire hazard testing for electric and electronic products Part 9.Pre-selection test procedures for fire hazard assessment guidance (IEC 60695- 1-30.2017) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GBZ5169.48-2024_English be delivered?

Answer: Upon your order, we will start to translate GBZ5169.48-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GBZ5169.48-2024_English with my colleagues?

Answer: Yes. The purchased PDF of GBZ5169.48-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.