GBZ42085-2022 English PDF

US$834.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GBZ42085-2022: Pneumatic fluid power - Assessment of component reliability by accelerated life testing - General guidelines and procedures
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/Z 42085-2022	834	Add to Cart	7 days	Pneumatic fluid power - Assessment of component reliability by accelerated life testing - General guidelines and procedures	Valid

Similar standards

GB/T 42155   GB/T 40565.3   GB/T 40565.2   GB/T 42086.3   GB/T 42086.1   

Basic data

Standard ID: GB/Z 42085-2022 (GB/Z42085-2022)
Description (Translated English): Pneumatic fluid power - Assessment of component reliability by accelerated life testing - General guidelines and procedures
Sector / Industry: National Standard
Classification of Chinese Standard: J20
Classification of International Standard: 23.100.01
Word Count Estimation: 46,416
Date of Issue: 2022-12-30
Date of Implementation: 2022-12-30
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GBZ42085-2022: Pneumatic fluid power - Assessment of component reliability by accelerated life testing - General guidelines and procedures

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB /Z 42085-2022 ICS 23.100.01 CCSJ20 National Standardization Guidance Technical Document of the People's Republic of China Pneumatic components based on accelerated life tests General Guidelines and Procedures for Reliability Assessment (ISO /T R16194.2017, IDT) Posted on 2022-12-30 2022-12-30 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Symbols and units of measurement 2 5 Overview of Reliability and Accelerated Life Testing 2 6 Failure mechanism and mode 3 7 Accelerated Life Test Strategy 3 8 Accelerated life test design 4 9 Trial Termination 6 10 Statistical Analysis 7 11 Evaluation of reliability characteristics from test data 9 12 Test Report 9 Appendix A (informative) Stress levels for time-dependent stress models 10 Appendix B (Informative) Life-Stress Model 13 Appendix C (informative) Verification of Weibull slope after compromise19 Appendix D (Informative) Calculation Procedures for Censored Data 23 Appendix E (informative) Examples of the use of accelerated life testing in industrial applications 25 Appendix F (Informative) Palmglenn-Meiner Law 27 Appendix G (Informative) Result of Cylinder Accelerated Life Test 29 Reference 42

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is equivalent to ISO /T R16194.2017 "General Guidelines for Pneumatic Component Reliability Evaluation Based on Accelerated Life Test and "Procedure", the document type has been adjusted from the ISO technical report to my country's national standardization guiding technical document. The following minimal editorial changes have been made to this document. ---Corrected a small amount of editorial errors in ISO /T R16194.2017, and changed the Boltzmann constant K value in the formula (B.4) from "8.623×10-5eVK-1" was changed to "8.6171×10-5eVK-1"; ---Corrected a small amount of editorial errors in ISO /T R16194.2017, changed "S3=1/2(S2-S1)" in 8.2 to "S3= S22/S1"; --- Corrected a small amount of editorial errors in ISO /T R16194.2017, and changed "'y' as absolute pressure" in Appendix C to "'x' is listed as absolute pressure". Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Hydraulic Pneumatic Standardization Technical Committee (SAC/TC3). This document is drafted by. National Pneumatic Product Quality Inspection and Testing Center, Tianjin University, Jiangsu University, Ningbo Lida Pneumatic Complete Set Co., Ltd. Division, Ningbo Fenghua District Pneumatic Industry Association, Zhejiang Songqiao Pneumatic Hydraulic Co., Ltd., Ningbo Intelling Pneumatic Technology Co., Ltd., Albes (Changxing) Technology Co., Ltd., Wenzhou Jinye Pneumatic Technology Co., Ltd., Beijing University of Aeronautics and Astronautics, China University of Mining and Technology, Ningbo University, Zhejiang Provincial Institute of Standardization, Beijing Machinery Industry Automation Research Institute Co., Ltd. The main drafters of this document. Liu Lijiao, Ren Zhisheng, Zhao Ling, Qian Pengfei, Mao Xubo, Yin Hongbai, Lou Zhongyu, Lin Kaifeng, Hu Wenjing, Lin Nanxiang, Shi Yan, Meng Deyuan, Zhan Lizhong, Cao Qiaohui.

Introduction

In a pneumatic system, power is transmitted and controlled by compressed air in a circuit. Pneumatic system is composed of various components, which are various An important part of type mechanical equipment. Efficient and economical production requires highly reliable machinery. The reliability of pneumatic components can be evaluated in the laboratory according to the test methods under normal service conditions stipulated in national standards. Pneumatic components usually have a long service life. In order to quickly grasp their life characteristics, overstress can be used to conduct accelerated tests to make the components break out in advance. Failure, and determine the relationship between the reliability of the component under the accelerated life test and the reliability under normal service conditions. Pneumatic components based on accelerated life tests General Guidelines and Procedures for Reliability Assessment

1 Scope

This document establishes general procedures for evaluating the reliability of pneumatic components based on accelerated life testing. This document applies to directional valves, with piston Rod cylinders, pressure regulating valves and components covered by ISO.19973 (all parts). This document does not establish specific procedures for accelerated life testing of pneumatic components. This document gives the accelerated life test method of pneumatic components Variable conditions, and provide guidance for the development of accelerated life test methods for pneumatic components. This document applies to the first failure of pneumatic components without maintenance.

2 Normative references

This document has no normative references.

3 Terms and Definitions

The terms and definitions defined in ISO 5598, ISO.19973-1 and the following apply to this document. ISO and IEC maintain terminology databases for standardization at. 3.1 BX life BXlife The component or assembly has not been repaired after leaving the factory, and the reliability is (100-x)% of the life, or (100-x)% of the samples have not failed time. Note. The cumulative failure rate is x%. For example, x=10, then the cumulative failure probability of B10 life is 10%. 3.2 Acceleration factor accelerationfactor AF The ratio of life at normal service stress levels to life at accelerated stress levels. 3.3 Accelerated life test acceleratedlifetest; ALT A method of testing for components to fail more rapidly than under normal service conditions. 3.4 destroy limit destructlimit The level of stress at which one or more operating characteristics of a component no longer meet requirements, or where the component is damaged and cannot recover when the stress is reduced. Note. The damage limit is divided into the lower limit of damage and the upper limit of damage. 3.5 failure mechanism failure mechanism Physical or chemical process that causes instantaneous or cumulative damage to component materials. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GBZ42085-2022_English be delivered?

Answer: Upon your order, we will start to translate GBZ42085-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GBZ42085-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GBZ42085-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.