GBZ30374-2013 English PDFUS$294.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GBZ30374-2013: Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products Status: Valid
Basic dataStandard ID: GB/Z 30374-2013 (GB/Z30374-2013)Description (Translated English): Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products Sector / Industry: National Standard Classification of Chinese Standard: K04 Classification of International Standard: 13.020.50 Word Count Estimation: 15,148 Quoted Standard: IEC 62430-2009 Adopted Standard: IEC/TR 62476-2010, IDT Regulation (derived from): National Standards Bulletin 2013 No. 27 Issuing agency(ies): Ministry of Health of the People's Republic of China Summary: This standard specifies the use of internationally recognized standards, tools and practices for electrical and electronic products industry in the evaluation of restricted substances program. This standard also applies to electrical and electronic produc GBZ30374-2013: Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products ICS 13.020.50 K04 People's Republic of China national standardization of technical guidance documents Electronic and Electrical Products Limited Material Evaluation Guide (IEC /T R62476.2010, IDT) 2013-12-31 released 2015-03-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordThis instructional document has been drafted in accordance with the rules given in GB/T 1.1-2009. This guidance document uses the translation method equivalent to IEC /T R62476.2010, "Guidelines for the Evaluation of Restricted Substances in Electrical and Electronic Products". The following technical amendments to this document have been made in accordance with IEC /T R62476.2010. --- Increasing the normative references "IEC 62430.2009 environmental design of electrical and electronic products" (see Chapter 2); --- According to the latest development of international standards, the original text of the reference "IEC 62321" was revised to "GB/T 26125-2011 electricity Determination of six restricted substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers) of sub - electrical products (IEC 62321). 2008, IDT) "(see references); --- According to the latest development of international standards, the original text of the reference "IEC 62474 Electronic and Electrical Products Material Declaration" repair Replaced by IEC 62474.2012 Material Declaration for the Electrical Industry or for Products in the Electrical Industry (see references); --- According to the latest development of international standards, the original text of the reference "IEC /PAS62596" was revised to "IEC /PAS62596. 2009 "(see references); --- According to the latest developments in international standards, delete the original reference "IEC /PAS61906 electrical and electronic products Material Declaration Procedure "(see IEC /T R62476 References). This guidance document is proposed by the National Technical Committee for Environmental Standardization of Electrical and Electronic Products and Systems (SAC/TC297) Focused. The guiding technical documents drafting unit. Jiangsu Province Institute of Inspection and Quarantine Science and Technology, People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine The epidemic, the People's Republic of China Guangdong Exit Inspection and Quarantine, China Quality Certification Center, Hebei University of Technology. The main drafters of this guidance document. He Chonghui, Xiao Qian, horse chrysanthemum, Yan Hong, Li Xue, Cao Lihua, Wang Yinsheng, Pan Shenglin.IntroductionRegulatory and customer requirements for restricted substances in electrical and electronic products are receiving increasing attention. Therefore, manufacturers urgently need to establish procedures to fill Electronic material products limited requirements. Due to the complexity of the supply chain in the electrical and electronics industry, different programs need to be established to adapt to them The same type of electrical and electronic products and parts manufacturers. Different regulations and customer requirements for restricted substances may not be the same. Under normal circumstances, the "compliance assumption." However, when necessary, the manufacturer provides the relevant documents as additional evidence to the interested parties. These materials can be derived from analyzing test results. However, for complex products, it is difficult to complete all the analysis and testing; therefore, the need to use other The evaluation method, such as from the supply chain information. This guidance document is based on international standards and industry practice and is intended to provide an overview of the scope of application of the evaluation method and related technical documents guide. Different manufacturers determine the appropriate evaluation method for different products. This guidance document provides restricted substance control programs Some basic content Electronic and Electrical Products Limited Material Evaluation Guide1 ScopeThis guidance document provides the use of internationally accepted standards, tools and industry practices for the use of restricted substances in electrical and electronic products Evaluation of the program. This standard also applies to non-limited electronic and electrical products should be declared substance. This Guidance Document provides guidance on how to select and apply technical documents for restricted substances in electronic and electrical products And related guidelines for evaluation and control methods. This guidance document does not intend to create a new regulatory framework or use for certification purposes. However, where possible, special products The method of evaluation and control of substances can be integrated into the existing management system.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. Environmental Awareness Design for Electrical and Electronic Products3 Terms and definitionsIEC 62430-2009 defined and the following terms and definitions apply to this document. For ease of use, the following list is repeated Certain terms and definitions in IEC 62430-2009. 3.1 Restricted substances restrictedsubstance Restrictions on the use of the product, part or material in accordance with the regulations or the customer's contract. 3.2 Declare the substance declarablesubstance Substances to be declared in the product according to the regulations or the customer's contract. 3.3 Producer producer Organizations that accept suppliers' materials, components and components and provide products to customers. Note 1. The manufacturer in this Guidance Document has the responsibility of evaluating the material requirements of the product. Note 2. This guidance document has been prepared from the perspective of the producer on the supply chain. In the supply chain when the manufacturer to provide products to the downstream when its producers The role will be transformed into a supplier. 3.4 Supplier Provide materials, components and/or components to downstream producers' organizations. 3.5 Customer customer The organization or individual who accepts the product. Remark GB/T 19000-2008, the definition 3.3.5. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GBZ30374-2013_English be delivered?Answer: Upon your order, we will start to translate GBZ30374-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GBZ30374-2013_English with my colleagues?Answer: Yes. The purchased PDF of GBZ30374-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
