GB/T 9938-2013 English PDF

US$134.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9938-2013: Dentistry -- Designation system for teeth and areas of the oral cavity
Status: Valid

GB/T 9938: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 9938-2013	134	Add to Cart	3 days	Dentistry -- Designation system for teeth and areas of the oral cavity	Valid
GB/T 9938-1988	199	Add to Cart	3 days	Dentistry--Designation system for teeth and areas of the oral cavity	Obsolete

Similar standards

YY/T 1702   YY/T 1692   YY/T 1691   GB 30367   GB 9706.260   GB/T 9937   

Basic data

Standard ID: GB/T 9938-2013 (GB/T9938-2013)
Description (Translated English): Dentistry -- Designation system for teeth and areas of the oral cavity
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: C33
Classification of International Standard: 11.060.10
Word Count Estimation: 7,742
Older Standard (superseded by this standard): GB/T 9938-1988
Adopted Standard: ISO 3950-2009, IDT
Regulation (derived from): National Standards Bulletin No. 21 of 2013
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the use of double-digit mark teeth or mouth area approach.

GB/T 9938-2013: Dentistry -- Designation system for teeth and areas of the oral cavity

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dentistry. Designation system for teeth and areas of the oral cavity ICS 11.060.10 C33 National Standards of People's Republic of China Replacing GB/T 9938-1988 Dentistry teeth and mouth area designation method (ISO 3950.2009, IDT) Issued on. 2013-10-10 2014-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 9938-1988. This standard and GB/T 9938-1988 compared to the main changes and the reasons are as follows. --- Increased introduction; --- 1 Scope deleted "This standard applies to the field of oral clinical, teaching, research and production."; --- Increased by 2 principles and specific content; --- 4 teeth remove teeth marked "Each number must be pronounced separately, for example, constant canine should be read as 1-3,2-3,3-3,4-3. Marking System As shown in Figure 1, where italics deciduous teeth. "; --- 4 teeth tooth marked increase in specific numbers. This standard is identical with ISO 3950.2009 "Dentistry teeth and mouth area marked law." Please note that some of the content of this standard may involve patents. The standard release mechanism does not assume the responsibility to identify these patents. This standard was proposed by the State Food and Drug Administration. This standard by the National Standardization Technical Committee materials and oral appliances and equipment (SAC/TC99) centralized. This standard was drafted. Peking University School of Stomatology, medical equipment and test center. The main drafters of this standard. Lin Hong, Zhang. This standard replaces the standards previously issued as follows. --- GB/T 9938-1988.

Introduction

Increase in computer applications to store information, as well as through the data cable, printer paper and the oral presentation of oral information exchange will To increase resistance, making it necessary to describe the dental positioning system, a new set of basic elements. The standard system described initially prepared by the International Dental Federation (FDI), and access to the World Health Organization (WHO) and ISO /TC106 dental science and technology committee agreed to meet the following requirements. a) easy to understand and easy to professor; b) dialogue and oral easy to pronounce; c) when printing and easy through the data cable to communicate; d) easily translated into a computer "input"; e) in the dental clinical easily attached to the standard layout. Dentistry teeth and mouth area designation method

1 Scope

This standard specifies the double digit mark teeth or oral area approach.

2 Principles

With respect to the sagittal plane and bite, normal anatomical location of the dental arch can be reasonably mouth into four equal parts, and six equal parts. This standard, a quadrant (1/4) represents a quarter of the dental arch. This standard, 1/6, represents one-sixth of the dental arch. Teeth and mouth area to double-digit coding marked. At least one of the two numbers is "0", it is meant oral area. 9 replaced by a 0 indicates there is an abnormality in the oral region. Encoding does not contain 0 represents a single tooth. Wherein the encoding of the first digit indicates the quadrant where the teeth and the deciduous and permanent phase Distinction, second digit indicates tooth itself.

3 Oral Regional Flag

Oral region marked in Figure 1. 00 represents the whole mouth 01 represents maxillary region 02 represents the mandibular region 10 represents the upper right quadrant 20 shows the upper left quadrant 30 shows the lower left quadrant 40 shows the lower right quadrant 03 represents the upper right 1/6 04 indicates the front 1/6 05 for the upper left 1/6 06 represents the lower left 1/6 07 represents the front 1/6 08 represents the lower right 1/6

4 teeth tooth mark

Teeth teeth indicated in Figure 1. a) The first digit Numbers 1-4 indicate permanent dentition, digital 5-8 represents deciduous dentition. The oral representations were made from the upper right region starting clockwise Ascending. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9938-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9938-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9938-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9938-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9938-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9938-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.