GB/T 985.1-2008 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 985.1-2008	70	Add to Cart	Auto, < 3 mins	Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding	Valid
GB/T 985-1988	719	Add to Cart	5 days	Basic forms and sizes of weld grooves for gas welding manual arc welding and gas--Shielded arc welding	Obsolete

Similar standards

GB/T 2651   GB/T 2650   GB/T 2652   GB/T 983   GB/T 985.4   GB/T 985.2   

Basic data

Standard ID: GB/T 985.1-2008 (GB/T985.1-2008)
Description (Translated English): Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J33
Classification of International Standard: 25.160.01
Word Count Estimation: 17,182
Date of Issue: 2008-03-31
Date of Implementation: 2008-09-01
Older Standard (superseded by this standard): GB/T 985-1988
Quoted Standard: GB/T 324; GB/T 5185; GB/T 16672
Adopted Standard: ISO 9692-1-2003, MOD
Regulation (derived from): National Standard Approval Announcement 2008 No.5 (Total No.118)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the groove welded steel forms and sizes. This section applies to welding, SMAW, gas welding and beam welding.

GB/T 985.1-2008: Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding ICS 25.160.01 J33 National Standards of People's Republic of China Replacing GB/T 985-1988 Gas welding, SMAW, GMAW And high-energy beam welding is recommended groove (ISO 9692-1.2003, Weldingandaliedprocesses-Recommendationsforjoint preparation-Part 1. Manualmetalarcwelding, gas-shieldarcwelding, gaswelding, TIGweldingandbeamweldingofsteels, MOD) Posted 2008-03-31 2008-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 985 is divided into the following four parts. --- GB/T 985.1 gas welding, arc welding, gas welding and beam welding Recommended groove; --- GB/T 985.2 SAW recommendation groove; --- GB/T 985.3 aluminum and aluminum alloy gas welding recommendation groove; --- GB/T 985.4 clad steel recommendation groove. This section GB/T 985.1. The partial modification of the use of ISO 9692-1.2003 "Welding and allied processes recommended welding groove - Part 1. Arc welding of steel Welding, gas metal arc welding, gas welding, TIG welding and beam welding of high-energy "(in English). This section according to ISO 9692-1.2003 redrafted. This standard and ISO 9692-1.2003 as compared to the technical content amended as follows. --- Added Appendix A. For ease of use, this section made the following editorial changes. --- Deleted international standards foreword; --- The standard name changed to "gas welding, arc welding, gas welding and beam welding Recommended groove"; --- To ISO 9692-1.2003 and other international standards referenced, or modified have been adopted as the equivalent of a standard by our standards Instead of the corresponding international standards; --- Table numbers were adjusted. This Part replaces GB/T 985-1988 "welding, SMAW basic form and GMAW welding groove and the size." Section compared with the GB/T 985-1988 The main changes are as follows. --- Increasing the scope of high-energy beam welding head; --- Groove in accordance with the one-sided and double-sided welding welding division; --- Recommended for each groove corresponding welding method; --- Increased the narrow gap welding groove. Appendix A of this section is an informative annex. This part of the National Standardization Technical Committee welded and centralized. This section is drafted. Harbin Welding Institute, Dongfang Boiler (Group) Co., Ltd. The main drafters of this section. Pudong Guang, PAN Qian Gang, storage following the monarch. This part of the standard replaces the previous editions are. --- GB 985-1967, GB 985-1980, GB/T 985-1988. Gas welding, SMAW, GMAW And high-energy beam welding is recommended groove

1 Scope

GB/T 985 provisions of this part of the steel welding groove forms and sizes. This section applies to gas welding, arc welding, gas protection Welding protection and energy-beam welding.

2 Normative references

The following documents contain provisions which, through reference GB/T 985 of this text, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 324 Weld notation (GB/T 324-1988, eqv ISO 2553. 1984) GB/T 5185 Welding and allied processes method code (GB/T 5185-2005, ISO 4063.1998, IDT) GB/T 16672 Weld tilt and swivel working position definitions (GB/T 16672-1996, idt ISO 6947.1993)

3 General

This section on the principle of full penetration of the provisions of the butt joint groove forms and sizes. For incomplete penetration butt joints, allowing Xu other forms of welding groove. Welding symbols see GB/T 324. Welding position See GB/T 16672.

4 welding method

Table 1 to Table 4 provides all kinds of groove for the appropriate welding method. If necessary, it can also be used in combination of two or more applicable methods welding. Welding code See GB/T 5185.

5 groove bottom grinding

From the process point of view, without the blunt edge of the groove can be polished to its roots base, retain a certain amount of blunt edges (2mm Or less).

6 groove recommendation forms and sizes

6.1 single-sided butt weld groove Table provides single-sided butt welding groove forms and dimensions 1. When the cross-position welding, bevel (or groove face angle) may be appropriate to increase, And allow asymmetric. Given clearance also apply to tack welding conditions. 6.2 double-sided butt weld groove Table 2 provides double-sided butt welding groove forms and sizes. When the cross-position welding, bevel (or groove face angle) may be appropriate to increase, And allow asymmetric. Given clearance also apply to tack welding conditions. 6.3 single-sided fillet weld Table 3 specifies the form of joint-sided fillet welds. 6.4 double-sided fillet welds Table 4 provides a form fitting double fillet welds. ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 985.1-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 985.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 985.1-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 985.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 985.1-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 985.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.