GB/T 9797-2022 English PDFUS$479.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 9797-2022: Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium Status: Valid GB/T 9797: Historical versions
Basic dataStandard ID: GB/T 9797-2022 (GB/T9797-2022)Description (Translated English): Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A29 Classification of International Standard: 25.220.40 Word Count Estimation: 26,276 Date of Issue: 2022-10-14 Date of Implementation: 2023-05-01 Older Standard (superseded by this standard): GB/T 9797-2005, GB/T 9798-2005 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 9797-2022: Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Metallic and other inorganic coatings -- Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium ICS 25.220.40 CCSA29 National Standards of People's Republic of China Replacing GB/T 9797-2005, GB/T 9798-2005 Metal and other inorganic coatings Nickel, NiCr, CuNi and CuNiCr plating (ISO 1456.2009, MOD) Published on 2022-10-12 2023-05-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I Introduction III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Information to be provided by the purchaser to the electroplating party2 4.1 Required Information 2 4.2 Additional Information 3 5 Logo 3 5.1 General requirements 3 5.2 Identification Rule 3 5.3 Service Condition No. 4 5.4 Types of copper substrates 11 5.5 Types of Nickel Plating 11 5.6 Types and thicknesses of chrome plating 11 6 Requirements 12 6.1 Appearance 12 6.2 Plating thickness 12 6.3 Double and triple nickel plating 12 6.4 Bonding strength 12 6.5 Corrosion Resistance [Copper Accelerated Acetic Acid Salt Spray (CASS), Corrosion Paste (CORR) and Acetic Acid Salt Spray (AASS) Tests] 12 6.6 STEP test requirements 13 6.7 Scalability 13 6.8 Heat treatment for stress relief prior to plating 13 6.9 Heat treatment to eliminate hydrogen embrittlement 13 7 Sampling 13 Appendix A (Normative) Determination of Sulfur Content of Nickel Coatings 14 Appendix B (normative) ductility test 15 Appendix C (Informative) Measurement of Crack and Pore Density of Chromium Coatings 16 Appendix D (normative) Thickness measurement method 18 Appendix E (Informative) STEP Test Method 19 Reference 20 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document replaces GB/T 9797-2005 "Nickel-chromium and copper-nickel-chromium electroplating coatings for metal coverings" and GB/T 9798-2005 "Golden Belonging to Overlay Nickel Plating". This document is mainly based on GB/T 9797-2005 and integrates the contents of GB/T 9798-2005.and Compared with GB/T 9797-2005, in addition to structural adjustment and editorial changes, the main technical changes are as follows. --- Added "necessary information" type of nickel coating, type of chromium coating [see 4.1d) and 4.1e)]; --- Combined "Service Condition Number" and "Service Environment Examples Corresponding to Various Service Condition Numbers", and included them in the "Identification" chapter (see 5.3, Chapter 5 and Appendix A of the.2005 edition); --- Added identification rules for heat treatment of coatings (see 5.2); --- Increase the type i of nickel plating without mechanical polishing containing high sulfur bright, semi-bright or dark nickel (see 5.5); --- Increased the requirements for the potential difference of double-layer or triple-layer nickel plating (see Table 5); --- Changed the requirements for the percentage of thickness of each coating in the double-layer or triple-layer nickel coating (see Table 5, Table 7 of the.2005 edition); --- Increased type b black chrome for chrome plating (see 5.6); --- Added constant pressure test for pore density measurement of chromium coating (see Appendix C.3.2.2); --- Added STEP test method (see Appendix E). This document is modified to adopt ISO 1456.2009 "Nickel, nickel-chromium, copper-nickel and copper-nickel-chromium electroplating of metallic and other inorganic coatings Floor". The technical differences between this document and ISO 1456.2009 and their reasons are as follows. --- Regarding normative reference documents, this document has made adjustments with technical differences to adapt to our country's technical documents, the adjustment situation. The situation is reflected in Chapter 2 "Normative References", and the specific adjustments are as follows. ● Replace ISO 2080 with GB/T 3138 which is equivalent to adopting international standards (see Chapter 3); ● Replace ISO 2177 with GB/T 4955 which is equivalent to adopting international standards (see Appendix D and Appendix E); ● Replace ISO 2819 with GB/T 5270 which is equivalent to adopting international standards (see 6.4); ● Replace ISO 10289 with GB/T 6461 which is equivalent to adopting international standards (see 6.5); ● Replace ISO 1463 with GB/T 6462 which is equivalent to adopting international standards (see 5.5, Appendix D); ● Replace ISO 3882 with GB/T 6463 which is equivalent to adopting international standards (see Appendix D); ● Replace ISO 4541 with GB/T 6465 which is equivalent to adopting international standards (see 6.5); ● Replace ISO 9227 with GB/T 10125 which is equivalent to adopting international standards (see 6.5); ● Replace ISO 2064 with GB/T 12334 which is equivalent to adopting international standards (see Chapter 3); ● Replace ISO 4519 with GB/T 12609 which is equivalent to adopting international standards (see 6.10); ● Replace ISO 2361 with GB/T 13744 which is equivalent to adopting international standards (see Appendix D); ● Replace ISO 3497 with GB/T 16921 which is equivalent to adopting international standards (see Appendix D); ● Replace ISO 9587 with GB/T 19349 which is equivalent to adopting international standards (see Chapter 3, 6.8); ● Replace ISO 9588 with GB/T 19350 which is equivalent to adopting international standards (see Chapter 3, 6.9); ● Replace ISO 3543 with GB/T 20018 which is equivalent to adopting international standards (see Appendix D); ● Replace ISO 10587 with GB/T 26107 which is equivalent to adopting international standards (see 6.9); ● Replace ISO 9220 with GB/T 31563 modified to adopt international standards (see Appendix D); ● Replace ISO 27831-2 with GB/T 34626.2 modified to adopt international standards (see 5.4, Appendix C); ● Replace ISO 16348 with GB/T 34627 which is equivalent to adopting international standards (see Chapter 3); --- Changed "salt spray test" to "AASS test" (see 6.5 and Table 6), and clarified the salt spray test method; --- Changed the standard documents cited in the CASS test and AASS test to the normative reference document GB/T 10125 "Artificial Gas Atmospheric Corrosion Test Salt Spray Test" replaces informative references. The following editorial changes have been made to this document. --- Correct the coating identification "Zn/Cu15a/Ni15/Crr" to "Zn/Cu15a/Ni15b/Crr", "Zn/Cu20s/Ni30s/Crr" It is "Zn/Cu20a/Ni30s/Crr" (see Table 2); --- According to the order mentioned in the text, the numbers of Appendix A, Appendix B, Appendix C and Appendix D have been adjusted; --- The 6.10 sampling, adjusted to Chapter 7 sampling. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Metal and Non-Metallic Coatings (SAC/TC57). This document was drafted by. Wuhan Institute of Materials Protection Co., Ltd., Guangzhou Sanfu New Material Technology Co., Ltd., Hefei Huaqingfang Xing Surface Technology Co., Ltd., Dongguan Jinluan Hardware Products Co., Ltd., Tongxiang Tiesheng Circuit Equipment Co., Ltd., Wuhan Aobang Surface Technology Co., Ltd., Wuhan Institute of Standardization, Jingda (Jingzhou) Auto Parts Co., Ltd., Jinhua Guanyu Luggage Co., Ltd., Lixin Yichuang Auto Tools Co., Ltd., Fujian Biaoxin Group (Zhangzhou) Canning Co., Ltd. The main drafters of this document. Mao Zuozu, Zhang Dezhong, Tian Zhibin, Liu Wanqing, Lin Yunfeng, Zhao Tao, Huang Yong, Zhan Yiteng, He Yuan, Yi Juan, Chu Qifeng, Lu Mingwei, Lu Zhi, Ren Xinghai, Zhang Huaping, Tao Jin, Chen Qing, Wang Leilei, Lu Zhirong. The previous versions of the documents replaced by this document are as follows. ---GB/T 9797, first published in 1988, first revised in.1997, second revised in.2005; ---GB/T 9798, first published in 1988, first revised in.1997, second revised in.2005.IntroductionThis document merges GB/T 9797-2005 "Metal Overlay Nickel-Chromium and Copper Nickel-Chromium Electroplating Coatings" and GB/T 9798-2005 "Nickel Electroplating Coatings for Metallic Coatings", revised. Decorative nickel, copper-nickel plating (with or without copper underlayer and chrome-free finish), suitable for use to avoid friction or touch, or with chrome It is also suitable for workpieces that do not require high discoloration. Corrosion resistance depends on the thickness and type of coating. Decorative nickel-chromium and copper-nickel-chromium coatings are used to enhance product appearance and corrosion resistance. Corrosion resistance depends on the thickness of the coating and type. Generally speaking, multi-layer nickel has better corrosion resistance than single-layer nickel of the same thickness. Have better protection performance. Metal and other inorganic coatings Nickel, NiCr, CuNi and CuNiCr plating WARNING - This document may be inconsistent with certain national health, safety and environmental regulations, and some substances and The process, if appropriate measures are not taken, can present a health hazard. This document does not discuss any health hazards involved in the use of the document hazards, safety or environmental matters and regulations. It is the responsibility of the user of this document to establish appropriate and practicable health, safety and environmental regulations and to take appropriate When measures are taken to comply with national, local and international regulations and regulations. Compliance with this document does not imply release from legal obligations.1 ScopeThis document specifies the requirements for decorative nickel, nickel-chromium, copper-nickel and copper on steel, zinc and zinc alloys, copper and copper alloys, and aluminium and aluminium alloys. Requirements for nickel-chromium electroplating, which is used to provide a beautiful appearance and enhanced protection. This document also specifies different thicknesses and types of coatings , and provides guidelines for the selection of the coating level of the electroplated parts exposed to the corresponding service environment. This document does not specify the surface condition of the base metal prior to electroplating. This document applies to steel, zinc and zinc alloys, copper and copper alloys, and decorative nickel, nickel-chromium, copper-nickel and copper on aluminium and aluminium alloys Nickel-chromium plating. This document does not apply to the electroplating of unfinished sheet, strip, wire, nor to the electroplating of threaded fasteners or coil springs. GB/T 12600 specifies the requirements for copper-nickel-chromium electroplating on plastics. GB/T 12332 and GB/T 11379 respectively stipulate the work requirements for engineering nickel and engineering chromium plating.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 3138 Metal and other inorganic coating surface treatment terms (GB/T 3138-2015, ISO 2080.2008, IDT) GB/T 4955 Metal Covering Covering Thickness Measurement Anodic Dissolution Coulometric Method (GB/T 4955-2005, ISO 2177. 2003, IDT) GB/T 5270 Review of Test Methods for Adhesion Strength of Electrodeposited and Electroless Deposited Metallic Coatings on Metal Substrates (GB/T 5270-2005, ISO 2819.1980, IDT) GB/T 6461 Rating of Specimens and Specimens After Corrosion Tests of Metal and Other Inorganic Coatings on Metal Substrates (GB/T 6461-2002, ISO 10289.1999, IDT) GB/T 6462 Metal and oxide coating thickness measurement microscopy (GB/T 6462-2005, ISO 1463.2003, IDT) Review of GB/T 6463 Metal and Other Inorganic Coating Thickness Measurement Methods (GB/T 6463-2005, ISO 3882.2003, IDT) GB/T 6465 Metal and other inorganic coating corrosion paste corrosion test (CORR test) (GB/T 6465-2008, ISO 4541.1978, IDT) GB/T 10125 Artificial Atmosphere Corrosion Test Salt Spray Test (GB/T 10125-2021, ISO 9227.2017, MOD) GB/T 12334 Definition and General Rules for Thickness Measurement of Metals and Other Non-Organic Coatings (GB/T 12334- 2001, ISO 2064.1996, IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9797-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 9797-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 9797-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9797-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 9797-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9797-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
