GB/T 9460-2023 English PDFUS$369.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 9460-2023: Solid wires and rods for fusion welding of copper and copper alloys Status: Valid GB/T 9460: Historical versions
Basic dataStandard ID: GB/T 9460-2023 (GB/T9460-2023)Description (Translated English): Solid wires and rods for fusion welding of copper and copper alloys Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J33 Classification of International Standard: 25.160.20 Word Count Estimation: 18,173 Date of Issue: 2023-11-27 Date of Implementation: 2024-06-01 Older Standard (superseded by this standard): GB/T 9460-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 9460-2023: Solid wires and rods for fusion welding of copper and copper alloys---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 25:160:20 CCSJ33 National Standards of People's Republic of China Replace GB/T 9460-2008 Copper and copper alloy welding wire Published on 2023-11-27 2024-06-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPrefaceⅠ 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Model 1 5 Technical requirements 2 6 Test methods 5 7 Amendment Rules 5 8 Inspection Rules 5 9 Technical conditions of supply 6 Appendix A (informative) Comparison table between this document and ISO 24373:2018 structure number 7 Appendix B (informative) Technical differences between this document and ISO 24373:2018 and their reasons 8 Appendix C (informative) Brief description of welding wire 9 Appendix D (informative) Welding wire model comparison 11 Appendix E (informative) Instructions for control of welding wire composition for different welding methods 13 Reference 14ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document replaces GB/T 9460-2008 "Copper and Copper Alloy Welding Wires": Compared with GB/T 9460-2008, except for structural adjustments and editing In addition to sexual changes, the main technical changes are as follows: a) Added a model of SCu5285 (see 5:3); b) Changed some chemical composition requirements (see 5:3, 4:1 of the:2008 edition); c) Changed the chemical composition codes of SCu6560 and SCu6560A, and the character codes of SCu6810A (see 5:3,:2008 edition 4:1); d) Changed the regulations for sampling when conducting chemical composition analysis of welding wire (see 6:3, 5:1:1 of the:2008 edition); e) Added contract modification rules (see Chapter 7); f) The inspection rules have been changed (see Chapter 8, Chapter 6 of the:2008 edition); g) The requirements for “packaging, marking and quality certificate” are deleted (see Chapter 7 of the:2008 edition); h) Added the requirement of "Technical Conditions of Supply" (see Chapter 9): This document is modified to adopt ISO 24373:2018 "Welding Materials Classification of Solid Welding Wires and Filling Wires for Fusion Welding of Copper and Copper Alloys": Compared with ISO 24373:2018, this document has many adjustments in structure: A comparison list of structural number changes between the two documents See Appendix A: Compared with ISO 24373:2018, there are many technical differences between this document and the clauses involved in the outer margin of the page: Single lines (|) are marked: A list of these technical differences and their causes is provided in Appendix B: The following editorial changes have been made to this document: ---In order to coordinate with the existing standards, the standard name is changed to "Copper and Copper Alloy Welding Wire"; ---Added Appendix C (informative) "Brief Description of Welding Wire": Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed and coordinated by the National Welding Standardization Technical Committee (SAC/TC55): This document was drafted by: Harbin Welding Research Institute Co:, Ltd: of China National Machinery Research Institute Group, Xinlide (Tianjin) Welding Materials Co:, Ltd: Company, Shanghai SMIC Welding Materials Co:, Ltd:, Hangzhou Huaguang Welding New Materials Co:, Ltd:, Kunshan Jingqun Welding Materials Technology Co:, Ltd:, Tianjin University Bridge Welding Materials Group Co:, Ltd:, Sichuan Atlantic Welding Materials Co:, Ltd:, Shandong Suolide Welding Materials Co:, Ltd:, Changshu Longteng Welding Materials Technology Co:, Ltd:, Beijing Jinwei Welding Materials Co:, Ltd:, Yichang Monkey King Welding Wire Co:, Ltd:, Jiangsu Jiuzhou New Materials Technology Co:, Ltd:, Guo Home welding materials quality inspection and testing center: The main drafters of this document: Shi Baicheng, Yu Changquan, Wu Bin, Huang Weiqing, Tong Tianwang, Yang Zijia, Wen Jin, Xu Xiaolong, Guan Changyong, Ji Bingyuan, Wang Xuedong, Li Hongmei, Liu Siyao: This document was first published in 1988, revised for the first time in:2008, and this is the second revision: Copper and copper alloy welding wire1 ScopeThis document specifies the models, technical requirements, test methods, rounding rules, inspection rules and supply of copper and copper alloy solid welding wires and filler wires: Goods technical conditions and other contents: This document applies to copper and copper alloy solid welding wires and filler wires for fusion welding such as gas shielded arc welding, gas welding and plasma arc welding (hereinafter Referred to as "welding wire"):2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 5121 (all parts) Chemical analysis methods for copper and copper alloys GB/T 8170-2008 Numerical rounding rules and representation and determination of limit values GB/T 25775 Technical conditions for supply of welding materials Product type, size, tolerance and marking (GB/T 25775-2010, ISO 544:2003,MOD) GB/T 25778 Welding Materials Procurement Guide (GB/T 25778-2010, ISO 14344:2010, MOD)3 Terms and definitionsThere are no terms or definitions to be defined in this document:4 models4:1 Model classification Welding wire models are divided according to the chemical composition of the welding wire: One wire model may be suitable for several welding processes: For a brief description of welding wire, see Appendix C: For a comparison of the welding wire models of this document and other relevant standards, see Appendix D: For instructions on controlling the composition of welding wire for different welding methods, see Appendix E: 4:2 Model compilation method The welding wire model should consist of two parts: a) Part 1: Use the letter “S” to indicate welding wire; b) Part 2: Use “Cu” plus 4 digits or a combination of 4 digits and letters to represent the character code for the chemical composition classification of copper-based welding wires: No:, see 5:3: In addition to the above mandatory codes, optional codes can be appended in parentheses after the second part: The chemical composition code is represented by "Cu" plus the chemical symbol and nominal content of the main added elements, see 5:3: Examples of welding wire models in this document are as follows: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9460-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 9460-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 9460-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9460-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 9460-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9460-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
