GB/T 9414.3-2012 English PDF

US$614.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9414.3-2012: Maintainability of equipment -- Part 3: Verification and collection, analysis and presentation of data
Status: Valid

GB/T 9414.3: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 9414.3-2012	614	Add to Cart	3 days	Maintainability of equipment -- Part 3: Verification and collection, analysis and presentation of data	Valid
GB/T 9414.3-1988	319	Add to Cart	3 days	Guide on maintainability of equipment--Prat 3: maintainability programme	Obsolete

Similar standards

GB/T 12325   GB/T 5465.2   GB/T 5169.5   GB/T 9414.5   GB/T 9414.9   GB/T 9414.2   

Basic data

Standard ID: GB/T 9414.3-2012 (GB/T9414.3-2012)
Description (Translated English): Maintainability of equipment -- Part 3: Verification and collection, analysis and presentation of data
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K04
Classification of International Standard: 21.020
Word Count Estimation: 31,322
Older Standard (superseded by this standard): GB/T 9414.5-1988; GB/T 9414.6-1988
Quoted Standard: IEC 60050 (191)-1990; IEC 60300-3-10-2001; IEC 60300-3-12; IEC 60300-3-14; IEC 60706-2; IEC 61160; IEC 61649; IEC 61710
Adopted Standard: IEC 60706-3-2006, IDT
Regulation (derived from): National Standards Bulletin No. 41 of 2012
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the necessary repairs verification aspects, to ensure products meet the requirements of the maintenance requirements, This section also provides the appropriate procedures and test methods. Maintainability Maintainability verificat

GB/T 9414.3-2012: Maintainability of equipment -- Part 3: Verification and collection, analysis and presentation of data

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Maintainability of equipment Part 3. Verification and collection, analysis and presentation of data ICS 21.020 K04 National Standards of People's Republic of China Replacing GB/T 9414.5-1988, GB/T 9414.6-1988 Maintenance - Part 3. Validation and data collection, Analysis and Expression Maintainabilityofequipment-Part 3. Verificationandcolection, analysisand (IEC 60706-3.2006, IDT) Issued on. 2012-12-31 2013-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 maintainability testing Introduction 2 4.1 authentication purposes 2 4.2 Effect of maintainability verification of maintenance support factor 2 4.3 Method 2 verification 4.4 Verification Program 3 4.5 Conditions and limitations 3 4.6 Qualitative and quantitative verification procedures 4 5 5 qualitative validation procedures 5.1 Design Review 5 5.2 Test procedure 5 Review 5 Maintenance 5.3 Degree of difficulty 5.4 Maintenance Task Analysis Review 5 6 5.5 Operating Review process 6 quantitative verification program 6 6.1 Maintainability Prediction 6 6.2 based on demonstration test validation 6 6.3 Based on field data verification 7 7 7 Demonstration 7.1 Introduction 7 7.2 Demonstration program 7 7.3 Demonstration Programme 7 7.4 Conditions and Restrictions 8 7.5 demonstrates improved validation 8 Points 8 validator 8 Data source 8 8.1 Data collection and analysis 8.2 8 8.3 Evaluation 9 10 8.4 Comparison 9 maintenance of data collection, analysis and presentation 10 9.1 Introduction 10 9.2 Maintenance program 10 9.3 Data Sources 11 9.4 product demonstration and field data 11 9.5 Analysis Process 11 9.6 Data Representation 12 Appendix A (normative) Maintainability Demonstration program 15 A.1 Maintenance Test Method 15 A.2 Selection maintenance tasks 15 A.3 fault method of inducing 16 A.4 chooses 16 Appendix B (normative) Maintainability Demonstration Test Method 17 B.1 Introduction 17 B.2 Test Method 117 B.3 Test Method 217 B.4 Test Method 318 B.5 Test Method 418 B.6 Test Method 519 B.7 Test Method 619 B.8 Test Method 720 Annex C (normative) Maintenance-related data analysis 23 C.1 Introduction 23 C.2 Kolmogorov - Smirnov test 23 References 25

Foreword

GB/T 9414 "maintainability" or has plans to release the following sections. --- Part 1. Application guide; --- Part 2. design and development stage of the maintenance requirements and research; --- Part 3. Validation and data collection, analysis and representation; --- Part 4. Service and maintenance of security program guidelines; --- Part 5. diagnostic tests. This section GB/T 39414 Part of. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 9414.5-1988 "Guide on maintainability of equipment Part VI. Repair verification" and GB/T 9414.6- 1988 "Guide on maintainability of equipment Part 7. Collection of data, analysis and representation." This portion of the GB/T 9414.5-1988 And GB/T 9414.6-1988 compared to the main changes are as follows. --- Standard name "Guide on maintainability of equipment" unified to "repair" of; --- Standard structure using IEC 60706-3.2006; --- There is content in the relevant clauses of the Amendment, such as increasing the corrective maintenance (see 9.6.2); --- Adds two appendices. B maintainability demonstration test method Appendix, C maintainability data analysis appendix. This section uses the translation method is equivalent to using IEC 60706-3. validation and data collection, analysis. "Equipment Maintenance - Part 32006 And representation. " Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 2900.13-2008 Electrotechnical terminology credibility and quality of service (IEC 60050 (191).1990, IDT) --- GB/T 7828-2012 Design Review (IEC 61160Ed.2.2005, IDT) --- GB/T 9414.1-2012 Maintenance - Part 1. Application guide (IEC 60300-3-10.2001, IDT) --- GB/T 9414.2-2012 Maintainability Part 2. Design and development phase and research requirements (IEC 60706-2.2006, IDT) This part of the National Electrotechnical Standardization Technical Committee Electronic Product Reliability and Maintainability (SAC/TC24) centralized. This section is drafted. Beijing University of Posts and Telecommunications Ministry of Information Industry and Industrial Research Institute of Posts and Telecommunications Standardization. The main drafters of this section. Hu Yi-hong, Wu Bingmei, Natsumi round, Zeng Zhimin, FENG Chun-yan, Zhang Tiankui, Leiyue Jun, He Xinying, Qiu Yu, Liu Qi, Hong Liang, Wang Kang, Zhang Xu. This part of the standard replaces the previous editions are. --- GB/T 9414.5-1988; --- GB/T 9414.6-1988.

Introduction

Product design requirements including effective maintenance technology to ensure that products continue to work properly. Before the product is put into use, it is necessary Verify that the proposed maintenance program can perform like that design, data collection and analysis of the entire verification process is an indispensable part. Data used for authentication can have many sources, data source used in a particular case depends on many factors, including the availability of history Data and design status. Verify that the maintenance of the target has been achieved, better than the product test data generated in product validation. Historical data are classified into related topics from which to choose useful data, analyzes the data to provide the required information. This section GB/T 9414 related to the use of technical analysis explains some of the verification process. Design verification program to verify maintenance procedures, Tools and instruments needed for maintenance, technical information and product maintenance ease. This maintenance program can be improved, if necessary, to modify the product To improve its maintainability. It is important to be as early as possible, preferably before the start of production of the desired product to product design Changes contained in, in order to minimize costs. In most cases, this preliminary analysis is based on statistical analysis of small sample data. Thus, after the products into use, the best Continue to collect and analyze data to enable accurate verification process improvement. Since the initial validation of analytical evaluation is not easy, so these data heavy To, will decide whether there is enough maintenance support. This section contains the credibility of the standard system, the system will be described in detail below. GB/T 6992.1 and GB/T 6992.2 standard is the top technical credibility, which is how the credibility (including reliability, availability And maintainability) combine to provide guidance on product manufacturing. IEC 60300-3-10 is the top standard of maintenance, it is as an application guide 6992.2 part of the task is described in GB/T , it can be used to implement complete, including product design, development and maintenance of the planned session. This part also to achieve the best maintenance of the maintenance tasks to consider how to provide guidance. Maintenance - Part 3. Validation and data collection, Analysis and Expression

1 Scope

This section GB/T 9414 gives the various aspects of maintainability testing necessary to ensure that products meet the prescribed maintenance requirements; This section also provides the appropriate procedures and test methods. Maintainability testing should be any maintainability program an essential part (see IEC 60300-3-10.2001), for each different occasions need to select the appropriate method carefully, to ensure that the overall cost-effectiveness. This section also relates to a product during the design, the design is completed, the collection and use during production, it may require repairs related data points Analysis and presentation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. IEC 60050 (191).1990 Electrotechnical terminology credibility and quality of service (InternationalElectrotechnicalVocabulary (IEV) -Chapter191. Dependabilityandqualityofservice) IEC 60300-3-10.2001 Dependability management - Part 3-10. Application guide (Dependabilitymanagement-Part 3- 10. Applicationguide-maintainability) IEC 60300-3-12 Dependability management - Part 3-12. Application guide Integrated Logistics Support (Dependability management-Part 3-12. Applicationguide-Integratedlogisticsupport) IEC 60300-3-14 Dependability management - Part 3-14. Application guide repair and maintenance support (Dependability management-Part 3-14. Applicationguide-MaintenanceandMaintenancesupport) IEC 60706-2 Maintenance - Part 2. Design and development phase requirements and Research (Maintainabilityofequipment- Part 2. Maintainabilitystudiesduringthedesignphase) IEC 61160 Design Review (Designreview) Lower confidence limit IEC 61649 Weibull distribution data, confidence intervals and goodness of fit tests (Goodness-of-fittests, confidenceintervalsandlowerconfidencelimitsforWeibuldistributeddata) Goodness of fit test IEC 61710 power law model and estimation methods (Powerlawmodel-Goodness-of-fittestsand estimationmethods)

3 Terms and Definitions

IEC 60050 (191).1990 and as defined in the following terms and definitions apply to this document. 3.1 User selected device customerselectedequipment Product portion designated by the user. Note. In general, this part of the supplier of the service can not be controlled, but in the product design process and should consider its maintainability. Obviously needs of users and Cooperation between suppliers. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9414.3-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9414.3-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9414.3-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9414.3-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9414.3-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9414.3-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.