GB/T 9075-2008 English PDFUS$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 9075-2008: Code for examination and discard of ropes for ropeway Status: Valid GB/T 9075: Historical versions
Basic dataStandard ID: GB/T 9075-2008 (GB/T9075-2008)Description (Translated English): Code for examination and discard of ropes for ropeway Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J81 Classification of International Standard: 53.040.20 Word Count Estimation: 14,112 Date of Issue: 2008-10-13 Date of Implementation: 2009-05-01 Older Standard (superseded by this standard): GB 9075-1988 Quoted Standard: GB 8918; GB 12141; GB 12352-2007; GB/T 12738; GB/T 19401; GB/T 19402; GB/T 20188; YB/T 5295 Regulation (derived from): National Standard Approval Announcement 2008 No.17 (Total No.130) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the cableway installation of wire rope inspection, inspection, maintenance and disposal standards. This standard applies to passenger, freight ropeway, terrestrial cable car, towing wire rope lifts, freight lifts and does not apply to temporary forestry cableway wire rope, Note: This standard provisions, unless otherwise specified, " tramway ", " passenger aerial cableway ", " ground cable car ", " towing lifts " was the four common, if not specifically described as" carrying rope ", " carrying cable ", " dragline ", " balanced plan ", " tension cable ", " towing cable ", was six kinds of rope GM. GB/T 9075-2008: Code for examination and discard of ropes for ropeway---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Code for examination and discard of ropes for ropeway ICS 53.040.20 J81 National Standards of People's Republic of China Replacing GB 9075-1988 Cableway wire rope inspection and scrap specification Posted 2008-10-13 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions General provisions 2 4 4 5 scrapped 6 wire rope usage information processing 6 7 wire rope inspection records 6 8 rope storage 6 Appendix A (informative) Typical examples of splicing wire rope 7 records Internal Annex B (informative) wire rope inspection 8 Typical examples Annex C (informative) wire rope inspection records 10ForewordThis standard replaces GB 9075-1988 "aerial tramway wire rope inspection and discard norms." This standard compared with GB 9075-1988 The main changes are as follows. --- The standard name from "aerial tramway wire rope inspection and discard specification" to "cableway wire rope inspection and discard norms"; --- Increased passenger ground cable car, ropeway towing wire rope inspection and retirement provisions; --- Increasing the content of terms and definitions; --- Increased splicing size; --- Increased repair splice area; --- Increased beyond repair splice area; --- Increased external broken wires determination and disposal standards under special circumstances; --- Increasing the fixed end of the scrapping regulations. This standard Annex A, Annex B, Annex C is informative appendix. This standard by the national ropeway, amusement and recreational facilities under the jurisdiction of Standards and Technology Committee. This standard was drafted. Beijing Materials Handling Research Institute, Mount cableway operations center, Tai'an City cableway installation company. The main drafters. Zhang Haiqiao, Huangpeng Zhi, Li Gang, Huang Yuefeng, Wang Xiaoqing, Qin Miao, Xupei Sheng, Yun Ping, Wang Xu. This standard replaces the standards previously issued as follows. --- GB 9075-1988. Cableway wire rope inspection and scrap specification1 ScopeThis standard specifies the cableway wire rope inspection and installation, inspection, maintenance and decommissioning standards. This standard applies to passenger and freight ropeway, ground cable car, ropeway towing wire rope, do not apply to temporary tramway and forestry cableway Wire rope. Note. This standard provision, unless otherwise specified, "tramway", "passenger ropeway", "ground cable car", "Towing cableway" compared with the four common. If no specific Description is "skyline", "carrying cable", "pulling cable", "balanced Cable", "tension cords", "towing cable", compared with six kinds of common wire rope.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 8918 important uses rope GB 12141 Safety rules for freight ropeway GB 12352-2007 aerial tramway safety norms GB/T 12738 ropeway terminology GB/T 19401 passenger ropeway towing specifications GB/T 19402 Ground Passenger lifts Technical Specifications GB/T 20118 General Purpose Wire Rope YB/T 5295 Sealing rope3 Terms and DefinitionsGB/T 12738 and established the following terms and definitions apply to this standard. 3.1 Show and fixed rope end of the sleeve should not be used, to the extent of failure. 3.2 3.3 Consider showing broken wires, corrosion and wear of the results, with the nominal rope metallic cross-section compared to the percentage reduction. 3.4 When the case advocated tightening device failure, so that the rope tensioning tensioning device is still valid. 3.5 Ply twisted rope end fixed attachment means. The outer tapered sleeve, the cone, flexible aluminum wire, cone holder, elastic sleeve and connected Fork contact (see Figure 1). Commonly known as the anchor head wound. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9075-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 9075-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 9075-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9075-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 9075-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9075-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
