GB/T 8834-2016 English PDFUS$334.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8834-2016: Fibre ropes -- Determination of certain physical and mechanical properties Status: Valid GB/T 8834: Historical versions
Basic dataStandard ID: GB/T 8834-2016 (GB/T8834-2016)Description (Translated English): Fibre ropes -- Determination of certain physical and mechanical properties Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B56 Classification of International Standard: 59.080.50 Word Count Estimation: 17,136 Date of Issue: 2016-06-14 Date of Implementation: 2017-01-01 Older Standard (superseded by this standard): GB/T 8834-2006 Quoted Standard: GB/T 21328-2007; ISO 139; ISO 1968 Adopted Standard: ISO 2307-2005, IDT Regulation (derived from): National Standard Announcement No. 8 of 2016 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the following methods for determining the characteristics of a rope: linear density, twist pitch, braiding distance, elongation, breaking strength. The first three properties (linear density, twist pitch and braiding distance) are the values ??of the rope measured at a specific tension. This tension is called pre-tension. Elongation is the length increment at which the tension of the rope is increased from the initial value (pre-tension) to 50% of the nominal minimum breaking strength of the rope. The breaking strength is the maximum load that is recorded (or reached) during the fracture test on a tensile tester in which the moving part is moving at a constant speed. The breaking strength values ??listed in the rope specification table are valid only when using the above type of testing machine. When the entire rope can not be tested, the tests described in Annex B may be carried out with the consent of the parties concerned. At the customer's request, Ben GB/T 8834-2016: Fibre ropes -- Determination of certain physical and mechanical properties---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Fibre ropes.Determination of certain physical and mechanical properties ICS 59.080.50 B56 National Standards of People's Republic of China Replace GB/T 8834-2006 Determination of physical and mechanical properties of fiber ropes (ISO 2307..2005, IDT) 2016-06-14 release 2017-01-01 Implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 8834-2006 "Determination of physical and mechanical properties of ropes", except for editorial changes. As follows. - in the scope of the provisions of the increase in the twist of the relevant instructions (see Chapter 1); - in the normative reference documents, the addition of GB/T 21328-2007 and ISO 1968 (see Chapter 2); - Added "terms and definitions" (see Chapter 3); - an increase in the "twist distance measurement" (see 4.2); - increased sample size and sampling units (see 6.1 and 6.2); - an overview is added (see 9.1 and 10.1); - increased water resistance, determination of lubricating oil and treatment agent, heat setting of polyamide and polyester ropes (see Chapter 12, Chapter 13, Chapter 14 and 10.1); --- Added appendix "Alternative method for initial measurement of large rope". This standard uses the translation method equivalent to ISO 2307..2005 "Determination of physical and mechanical properties of fiber ropes" (English version). This standard is proposed by the Ministry of Agriculture of the People's Republic of China. This standard by the National Aquatic Standardization Technical Committee of fishing gear and fishing gear Sub-Technical Committee (SAC/TC156/SC4) and the national (SAC/TC302/SC2) Joint Code for the Standardization Technical Committee for Home Textiles. The drafting of this standard. China Academy of Fishery Sciences East China Sea Fisheries Research Institute, the Ministry of Agriculture rope with a product quality supervision and inspection test Heart, Weihai good transport network with Technology Co., Ltd., Zhejiang four brothers rope Co., Ltd. The main drafters of this standard. Shi Jiangao, Tang Zhenming, Chai Xiufang, Li Maojiu, Zhang Xiaoxian, Xu Xueming. This standard replaced the previous version of the standard release. --- GB/T 8834-1988, GB/T 8834-2006. Determination of physical and mechanical properties of fiber ropes1 ScopeThis standard specifies the following method of measuring the characteristics of the rope. ---Linear density; --- twist; - twist; ---elongation; Broken strength. The first three characteristics (line density, twist pitch, and twist distance) are the values measured by the rope under a specific tension, which is called the preload tension. Appendix A. The elongation is the length of the tension applied by the rope to the initial value (pre-tensioned) to 50% of the minimum rated breaking strength of the rope. The breaking strength is the amount of the sample that is recorded (or reached) during the fracture test on the moving parts of the moving parts Maximum load. The value of the rupture strength listed in the rope specification table is valid only when using the above type test machine. When the entire rope can not be tested, with the consent of the parties concerned, can be used as described in Appendix B to test. At the customer's request, this standard also provides a method for determining the water resistance, lubricating oil and treatment agent content and heat setting treatment of the rope.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 21328-2007 General requirements for fiber ropes (ISO 9554..1991, IDT) ISO 139 Standard conditions for temperature and humidity regulation and testing of textiles (Textiles-Standardatmospheresfor conditioning ISO 1968 Fiber ropes Terms and definitions (Fibreropes-Generalspecification)3 terms and definitionsThe terms and definitions defined in ISO 1968 apply to this document.4 principle4.1 Calculation of linear density The line density is obtained by the quality of the test sample after the temperature and humidity conditioning treatment and the length under pre-tensioning (see Chapter 9 and Appendix C). 4.2 Measurement of twist pitch and twist pitch The measurement of the lay length and the twist distance is made when the preload tension is applied. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8834-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 8834-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8834-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8834-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8834-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8834-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
