GB/T 8767-2010 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8767-2010: Ingots of zirconium and zirconium alloy Status: Valid GB/T 8767: Historical versions
Basic dataStandard ID: GB/T 8767-2010 (GB/T8767-2010)Description (Translated English): Ingots of zirconium and zirconium alloy Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H63 Classification of International Standard: 77.150.99 Word Count Estimation: 9,923 Date of Issue: 1/14/2011 Date of Implementation: 11/1/2011 Older Standard (superseded by this standard): GB/T 8767-1988 Quoted Standard: GB/T 231.1; GB/T 231.2; GB/T 231.3; GB/T 231.4; GB/T 13747.1; GB/T 13747.2; GB/T 13747.3; GB/T 13747.4; GB/T 13747.5; GB/T 13747.6; GB/T 13747.7; GB/T 13747.8; GB/T 13747.9; GB/T 13747.10; GB/T 13747.11; GB/T 13747.12; GB/T 13747.13; GB/T 13747.14; GB/T 13747.15; GB/T 13747.16; GB/T 13747.17; GB/T 13747.18; GB/T 13747.19; GB/T 13747.20; GB/T 13747.21; GB/T 13747.22; GB/T 13747.23; GB/T 13747.24; GB/T 26314 Regulation (derived from): Announcement of Newly Approved National Standards No. 2 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the diameter of not more than 820 mm of general industrial and nuclear industry with zirconium and zirconium alloy ingot requirements, test methods, inspection rules, marking, packaging, transportation, storage and contract (or orders) requirements. This Standard is applicable to vacuum consumable arc furnace production of zirconium and zirconium alloy ingot. GB/T 8767-2010: Ingots of zirconium and zirconium alloy---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Ingots of zirconium and zirconium alloy ICS 77.150.99 H63 National Standards of People's Republic of China Replacing GB/T 8767-1988 Zirconium and Zirconium Alloy Ingots Issued on. 2011-01-14 2011-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 8767-1988 "nuclear industry Zirconium and Zirconium Alloy Ingots." This standard compared with GB/T 8767-1988, mainly in the following changes. --- Standard name from the "nuclear industry Zirconium and Zirconium alloy ingots" to "zirconium and zirconium alloy ingots"; --- Increased Normative documents project; --- Remove the chemical composition table ingot, references GB/T 26314 "Zirconium and Zirconium Alloy and chemical ingredients"; --- Increasing the general industrial Zirconium and Zirconium Alloy ingots requirements; --- Increased requirements for chemical analysis methods; --- Increased ingot packing method; --- Increasing the contract (or purchase order) requirements; --- The chemical composition of samples were re-specified; --- Added Appendix A. Appendix A of this standard is the data appendix. The standard proposed by China Nonferrous Metals Industry Association. This standard Nonferrous Metals by the National Standardization Technical Committee. This standard by the Baoji Titanium Group Ltd., Baoji Titanium Industry Co., Ltd. is responsible for drafting. This standard by Guangdong Eastern zirconium Technology Co., Ltd. participated in the drafting. The main drafters of this standard. Fengjun Ning, Chen Feng, Zhang Jian, Lixian Jun, Huang Yongguang, Mao Lingling, Sun Yaguang. The standard standard replaces the previous editions. --- GB/T 8767-1988. Zirconium and Zirconium Alloy Ingots1 ScopeThis standard specifies the diameter of not more than 820mm of general industrial and nuclear industry Zirconium and Zirconium Alloy ingot requirements, test methods, inspection Rules, marking, packaging, transportation, storage and contracts (or orders) requirements. This standard applies to vacuum consumable arc furnace production of zirconium and zirconium alloy ingot.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 231 (all parts) Brinell hardness test GB/T 13747 (all parts) zirconium and zirconium alloy chemical analysis method GB/T 26314 Zirconium and Zirconium alloy grades and chemical composition3 Requirements3.1 Chemical composition 3.1.1 grade, chemical composition Zirconium and zirconium alloy ingot including general industrial use Zr-1, Zr-3, Zr-5 and the nuclear industry Zr-0, Zr-2, Zr-4 of 6 grades. Its chemical Component shall comply with GB/T 26314 of. 3.1.2 component tolerances When the demand side, the chemical composition retest analysis, the component tolerances shall comply with the provisions of GB/T 26314 of. 3.2 Dimensions and tolerances 3.2.1 ingot diameter tolerances shall comply with the provisions in Table 1. Table 1 millimeters Diameter range ≤350 > 350 ~ 550 > 550 ~ 720 > 720 ~ 820 Tolerance -30 -40 -50 -60 3.2.2 ingot length and weight and tolerance is determined by the supply and demand sides negotiated and specified in the contract (or purchase order) in. 3.2.3 ingot head, tail ends should be chamfered edges, chamfers should not be less than 20mm. Difference between maximum and minimum diameter of the same ingot 3.2.4 should not exceed 10% of the maximum diameter. 3.3 Brinell hardness When the demand side and specified in the contract (or purchase order) when the ingot should be measured Brinell hardness and meets the requirements of Table 2. Table 2 Nuclear Industry General Industrial Classification Grade Zr-0 Zr-2 Zr-4 All grades HBW10/3000 ≤160 ≤200 ≤200 Found ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8767-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 8767-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8767-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8767-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8767-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8767-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
