GB/T 8215-2009 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8215-2009: Methods of inspection for bristles Status: Valid GB/T 8215: Historical versions
Basic dataStandard ID: GB/T 8215-2009 (GB/T8215-2009)Description (Translated English): Methods of inspection for bristles Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B45 Classification of International Standard: 67.120.01 Word Count Estimation: 8,877 Date of Issue: 2009-07-08 Date of Implementation: 2009-12-01 Older Standard (superseded by this standard): GB/T 8215-1987 Quoted Standard: GB/T 2828.1 Regulation (derived from): National Standard Approval Announcement 2009 No.9 (Total No.149) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms and definitions bristles, inspection sampling program, inspection items and methods. This standard applies to all kinds of different specifications of the test bristles. GB/T 8215-2009: Methods of inspection for bristles---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Methods of inspection for bristles ICS 67.120.01 B45 National Standards of People's Republic of China Replacing GB/T 8215-1987 Bristle test methods Posted 2009-07-08 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 8215-1987 "Test Method export bristle." This standard compared with GB/T 8215-1987, the main changes are as follows. --- Remove the "export" word, known as "bristle test methods"; --- In addition to the use of GB/T 8215-1987 "export bristle test methods" in the terms and definitions, but also increased some of the terminology and definitions, Such as batch sampling, sample or the like; --- Increased rate of dust and color fastness determination; --- Increased upright mane test. This standard is proposed and managed by the China Certification and Accreditation Regulatory Commission. This standard is mainly drafted by. People's Republic of China Sichuan Exit Inspection and Quarantine. The main drafters of this standard. Hu Xiaoning, Shi Jian, Fang Jing. This standard replaces the standards previously issued as follows. --- GB/T 8215-1987. Bristle test methods1 ScopeThis standard specifies the terms and definitions bristles, inspection sampling plans, test items and methods. This standard applies to all kinds of different specifications of the test bristles.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 The main brush can be adapted to use the pig bristles collectively. 3.2 A group from the same supplier of the same varieties and specifications of the bristles. 3.3 Samples extracted from the laboratory to meet the required single sample test items. 3.4 Finished bristles from the top to the base, also known as size. 3.5 The size of the portion being above the bristles. 3.6 The size of the positive wire bristles in the following sections. 3.7 From the prescribed proportion of red mane foot section until only partially reduced scale, also known as full scale rate. 3.8 From a scale prescribed limit play then condensing (second gear) or to re-condensing (third gear) only the provisions bristle range, also known as soft feet. 3.9 The bristle tip flush with the main line by the size, also known as flat feet. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8215-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 8215-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8215-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8215-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8215-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8215-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
