GB/T 8013.2-2018 English PDFUS$399.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8013.2-2018: Anodic oxide coatings and organic polymer coatings on aluminium and its alloys -- Part 2: Combined coatings Status: Valid GB/T 8013.2: Historical versions
Basic dataStandard ID: GB/T 8013.2-2018 (GB/T8013.2-2018)Description (Translated English): Anodic oxide coatings and organic polymer coatings on aluminium and its alloys -- Part 2: Combined coatings Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H60 Classification of International Standard: 25.220.01 Word Count Estimation: 20,271 Date of Issue: 2018-05-14 Date of Implementation: 2019-02-01 Older Standard (superseded by this standard): GB/T 8013.2-2007 Regulation (derived from): National Standards Announcement No. 6 of 2018 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 8013.2-2018: Anodic oxide coatings and organic polymer coatings on aluminium and its alloys -- Part 2: Combined coatings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Anodic oxide and organic polymer films for aluminium and aluminium alloys - Part 2. Anodized composite films) ICS 25.220.01 H60 National Standards of People's Republic of China Replace GB/T 8013.2-2007 Aluminum and aluminum alloy anodized film and organic polymer film Part 2. Anodized composite film Part 2. Combinedcoatings Published on.2018-05-14 Implementation of.2019-02-01 State market supervision and administration China National Standardization Administration issued ForewordGB/T 8013 "Aluminum and aluminum alloy anodized film and organic polymer film" is divided into three parts. ---Part 1. Anodized film; ---Part 2. Anodized composite film; --- Part 3. Organic polymer coating. This part is the second part of GB/T 8013. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 8013.2-2007 "Aluminum and aluminum alloy anodized films and organic polymer films - Part 2. Anod. Film." Compared with GB/T 8013.2-2007, the main technical changes in this part are as follows. --- Revised the applicable "scope" of this section (see Chapter 1, Chapter 1 of the.2007 edition); ---Modified "normative references" (see Chapter 2, Chapter 2 of the.2007 edition); --- Removed "terms, definitions" (see Chapter 3 of the.2007 edition); --- Modify the "anodic oxidation composite membrane classification" to "classification" (see Chapter 3, Chapter 4 of the.2007 edition); ---Modified the contents of the "Classification" (see 3.1 and 3.2, Chapter 4 of the.2007 edition); --- In the "appearance", modify the "standard" to "model" (see 4.1, version 5.1 of.2007); --- Change "color and color difference" to "color difference" (see 4.2, 5.2 of.2007 edition); --- Modified the performance requirements and test methods for "color difference" (see 4.2 and 5.2,.2007 and 5.2 and 6.2); --- Revised the performance requirements of the local film thickness of the oxide film, the local film thickness of the paint film and the local film thickness of the composite film (see 4.4, 5.4) of the.2007 edition; --- Modified the performance requirements of "hardness" (see 4.5, 5.5 of.2007); --- In the "wear resistance" modified the performance requirements of the jet grinding method, modified the performance requirements and test methods of the falling sand method (see 4.6 and 5.6, Versions 5.6 and 6.6 of.2007; --- Revised the performance requirements and test methods for boiling water resistance (see 4.8 and 5.8,.2007 editions 5.8 and 6.8); --- Increased performance requirements and test methods for temperature and water resistance (see 4.9 and 5.9); --- Added "resistant to UV salt spray and fog" "resistant to cyclic acid sea salt salt spray corrosion" "salt-resistant dry and wet cycle corrosion" "salt resistance Performance requirements and test methods for "corrosion of solution" and "corrosion resistance of flow-resistant mixed gas", and "resistance to salt spray corrosion" and "resistance to Sulfur oxide humid atmosphere corrosive" collectively referred to as "environmental corrosion resistance", and modified "salt salt corrosion resistance" and "sulphur dioxide resistance Performance requirements for wet atmospheric corrosivity (see 4.10 and 5.10,.2007 editions 5.10, 5.11, 6.10 and 6.11); --- Increased the "man-resistant sweat resistance", "alcohol resistance" and "resistance to salt water" performance requirements and test methods, and "alkali resistance" and "resistance to mortar" "Nitrate resistance", "Nitrate resistance", "Detergent resistance" and "Solvent resistance" are collectively referred to as "chemical resistance" and "Alkaline resistance" is modified. Performance requirements and test methods (see 4.11 and 5.11,.2007 editions 5.12, 5.13, 5.14, 5.15, 5.16 and 5.17); ---Incorporating "moisture and heat resistance" into "temperature and humidity resistance", adding "constant temperature and humidity test", "high and low temperature cycle test" and "temperature and humidity cycle test" Performance requirements and test methods (see 4.12 and 5.12, see.2007 version 5.9); --- Revised the test method for natural weatherability (see 5.13.1,.2007 version 6.18.1); --- Revised the performance requirements and test methods for accelerated weathering of xenon lamps (see 4.13.2.1 and 5.13.2.1, 5.18.2.1 for.2007 edition) And 6.18.2.1); --- Modified the content of the inspection rules (see Chapter 6, Chapter 7 of the.2007 edition). This part was proposed by the China Nonferrous Metals Industry Association. This part is under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC243). This section drafted by. National Nonferrous Metals Quality Supervision and Inspection Center, Guangdong Industrial Analysis and Testing Center, Guangdong Jianmei Aluminum Profile Factory (Group) Co., Ltd., Guangya Aluminum Co., Ltd., Sichuan Samsung New Material Technology Co., Ltd., Guangdong Xingfa Aluminum Co., Ltd., Fujian Minfa Aluminum Industry Co., Ltd., Nonferrous Metals Technology and Economic Research Institute, Tianjin New Aaron Technology Co., Ltd., Jiangyin Hengxing Coating Co., Ltd. Sishan Nanshan Aluminum Co., Ltd., Lier Aluminum Co., Ltd., Foshan Sanshui Feng Aluminum Co., Ltd., Nanping Aluminum, Fujian Province Industry Co., Ltd., Guangdong Haomei New Material Co., Ltd., Guangdong Huachang Aluminum Factory Co., Ltd., Guangdong Xinhe Aluminum Industry Emerging Co., Ltd. The main drafters of this section. Fan Zhiyi, Hao Xuelong, Zhan Hao, Dai Yuexing, Xie Guoan, Wang Zheng, Xia Xiuqun, Wang Yusheng, Ge Lixin, Yu Quanhe, Lin Yilong, Li Wei, Qi Jinxing, Chen Hui, Xie Zhijun, Chen Fen, Tang Xingyu, Feng Ping, Sun Fengxian. The previous versions of the standards replaced by this section are. ---GB/T 8013.2-2007. Aluminum and aluminum alloy anodized film and organic polymer film Part 2. Anodized composite film1 ScopeThis part of GB/T 8013 specifies the classification, performance requirements, test methods and inspection rules for anodized composite films of aluminum and aluminum alloys. Then wait. This section applies to aluminum anodized composite membranes used in machinery, municipal, transportation, electrical, packaging, construction and decoration.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 629 chemical reagent sodium hydroxide GB/T 1733 paint film water resistance test method GB/T 1740 paint film moisture resistance test GB/T 1766 Paint and varnish coating aging rating method GB/T 1865-2009 Painted and varnish artificial weathering and artificial radiation exposure filtered xenon arc radiation GB/T 2423.51 Environmental testing - Part 2. Test method test Ke. Flow mixed gas corrosion test GB/T 4957 Non-conductive coating on non-magnetic base metal, thickness measurement of eddy current method GB/T 6461 Metal and other inorganic coatings on metal substrates after corrosion test samples and test pieces GB/T 6462 metal and oxide coating thickness measurement microscopy GB/T 6682 Analytical laboratory water specifications and test methods GB/T 6739 Paint and varnish pencil method for determination of film hardness Aluminium and aluminium alloy anodized films and organic polymeric films - Part 1 Aluminium and aluminium alloys - Determination of thickness of anodized oxide film - Part 1 GB/T 9276 coating natural weather exposure test method GB/T 9286 color and varnish paint film cross-cut test GB/T 9754 Determination of 20°, 60° and 85° specular gloss of paints and varnishes without metallic pigments Visual colorimetric test of GB/T 9761 paint and varnish GB/T 9789 Metal and other inorganic coatings are usually tested for sulfur dioxide corrosion under condensation conditions GB/T 10125 artificial atmosphere corrosion test salt spray test GB/T 11186.2 Measurement methods for colour of coatings - Part 2. colour measurement GB/T 11186.3 Method of measurement of coating colours Part 3. Calculation of colour difference Aluminium and aluminium alloys - Determination of anodic oxide film - Part 1 Abrasion resistance Aluminium and aluminium alloys - Determination of anodic oxide film - Part 3. Copper accelerated acetate spray test (CASS test) Aluminium and aluminium alloys - Determination of anodic oxide film - Part 6 Poor and appearance quality Aluminium and aluminium alloys - Determination of anodic oxide film - Part 7 Grindability ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8013.2-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 8013.2-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8013.2-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8013.2-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8013.2-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8013.2-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
