GB/T 8012-2013 English PDFUS$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8012-2013: Casting tin-lead solders Status: Valid GB/T 8012: Historical versions
Basic dataStandard ID: GB/T 8012-2013 (GB/T8012-2013)Description (Translated English): Casting tin-lead solders Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H62 Classification of International Standard: 77.150.60 Word Count Estimation: 11,184 Older Standard (superseded by this standard): GB/T 8012-2000 Quoted Standard: GB/T 8170; GB/T 10574.1; GB/T 10574.2; GB/T 10574.3; GB/T 10574.4; GB/T 10574.5; GB/T 10574.6; GB/T 10574.7; GB/T 10574.8; GB/T 10574.9; GB/T 10574.10; GB/T 10574.11; GB/T 10574.12; GB/T 10574.13 Adopted Standard: ASTM B32-2008, NEQ; ISO 9453-2006, NEQ; JIS Z3282-2006, NEQ Regulation (derived from): National Standards Bulletin No. 25 of 2013 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies requirements for casting tin-lead solder, test methods, inspection rules, marking, packaging, transportation, storage and quality certificates and contracts (or orders) content. This standard applies to wet, fire refining the produ GB/T 8012-2013: Casting tin-lead solders---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Casting tin-lead solders ICS 77.150.60 H62 National Standards of People's Republic of China Replacing GB/T 8012-2000 Casting tin-lead solder Issued on. 2013-12-17 2014-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 8012-2000 "casting tin-lead solder." This standard compared with GB/T 8012-2000, the main technical content Changes are as follows. --- Grade 40 by the reduced 37. A class adds two grades codenamed 15A, 5A's. Class B Delete codenamed 35B, 30B, 25B, 20B of the four grades. Containing silver solder delete codenamed 63Ag, 60Ag, 50Ag of three grades, increase codenamed Ag1.5, Ag2.5 the two grades; --- Chemical composition partly modified. Code 63AA of impurity elements in bismuth by the ≤0.005% revised to ≤0.008%; A class codenamed 63A, 60A, 55A, 50A, solder containing silver solder and phosphorus content of bismuth by the modification of ≤ ≤0.01% 0.020%, codenamed Ag2 containing silver solder silver content from 1% to 4% (specific content agreed by both parties) is amended as 1.80% - 2.20%; --- Delete the original standard "in addition to Sb, Bi, Cu, impurity is not greater than the sum of 0.08%" requirement; --- The requirement to remove physical properties; --- Increased production sampling requirements of the product; --- Deleted "Article weight, 250 ± 25g" provisions. The standard reference used by the US ASTMB32-2008 "solder metal standards", the international standard ISO 9453-2006 "solder Alloy chemical composition and shape "and the Japanese standard JISZ3282-2006" solder chemical composition and shape. " Various grades of impurities Limited are stricter than the corresponding grades above standard limits of impurities. Reference to the physical properties of cast tin-lead solder in Appendix A, and ASTMB32-2008 grades contrast Appendix B. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Yunnan Tin Group Co., Ltd. Participated in the drafting of this standard. Guangxi China Tin Group Co., Ltd. Yunnan Tin tin timber. The main drafters of this standard. Baijia Jiang, soup Lan, Li Zhihong, Tan Zuo Ming, Liu rights, Tan Yong, Chen Yun, Zhao Junfeng. This standard replaces the standards previously issued as follows. --- GB/T 8012-2000; GB/T 8012-1987. Casting tin-lead solder1 ScopeThis standard specifies the requirements for casting tin-lead solder, test methods, inspection rules, marking, packaging, transportation, storage and quality certificates as well as Contract (or purchase order) content. This standard applies to wet, fire refining production casting tin-lead solder.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment GB/T 10574 (all parts), chemical analysis of tin Method3 Requirements3.1 Categories Casting by tin-lead solder alloy composition is divided into 37 grades, as shown in Table 1. 3.2 Chemical composition 3.2.1 Casting lead solder chemical composition shall comply with the requirements in Table 1. 3.2.2 demand side, such as the chemical composition of cast tin-lead solder with special requirements, agreed upon by both parties. 3.3 appearance quality Cast tin-lead solder surface should be clean, non-corrosive, not a slag, burrs and foreign inclusions. 3.4 (article) Quality 3.4.1 casting tin-lead solder ingots (bars) single ingot (bars) should meet the quality specified in Table 2. Table 2 Xiqianhanliao casting ingot (bars) Quality Ingot weight/kg 25 ± 3 10 ± 1 5 ± 0.5 Article weight/g 1000 ± 100 500 ± 50 - 3.4.2 When the shape and quality of the cast tin-lead solder with special requirements, agreed upon by both parties. Test Method 4 Arbitration chemical composition analysis 4.1 casting tin-lead solder according to the provisions of GB/T 10574 performed. 4.2 casting tin-lead solder as required elements other than those specified in Table 1 is detected by the supply and demand sides determined in consultation analysis. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8012-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 8012-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8012-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8012-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8012-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8012-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |