GB/T 7926-2015 English PDFUS$569.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 7926-2015: NC reciprocating traveling type wire electrical-discharge machines -- Testing of the accuracy Status: Valid GB/T 7926: Historical versions
Basic dataStandard ID: GB/T 7926-2015 (GB/T7926-2015)Description (Translated English): NC reciprocating traveling type wire electrical-discharge machines -- Testing of the accuracy Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J59 Classification of International Standard: 25.080.99 Word Count Estimation: 27,234 Date of Issue: 2015-12-10 Date of Implementation: 2016-07-01 Older Standard (superseded by this standard): GB/T 7926-2005 Regulation (derived from): National Standard Announcement 2015 No.38 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 7926-2015: NC reciprocating traveling type wire electrical-discharge machines -- Testing of the accuracy---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. NC reciprocating traveling type wire electrical-discharge machines - Testing of the accuracy ICS 25.080.99 J59 National Standards of People's Republic of China Replacing GB/T 7926-2005 CNC wire EDM wire cutting back and forth go Machine accuracy test Issued on. 2015-12-10 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 Name 3 major components and machine axes 1 3.1 Cross table Single column machines 1 3.2 pairs of column machines 2 4 requirements 3 4.1 Unit 3 4.2 Referring to GB/T 17421.1-1998 3 4.3 Test sequence 3 Implementation of inspection 4 4.4 4.5 Measuring Instruments 4 4.6 minimum tolerance 4 4.7 positioning accuracy test and reference GB/T 17421.2-2000 4 4.8 Processing Inspection 4 Geometric tests 4 5 5.1 Basic linear motion 4 5.2 workbench or workpiece mounting frame 9 Motion 5.3 U axis and V axis 13 5.4 wire storage tube 15 16 6 Positioning accuracy test 7 20 Processing Inspection References 22ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 7926-2005 "WEDM (Reciprocating traveling type) - Testing of the accuracy." This standard compared with GB/T 7926-2005, the main changes are as follows. Name --- standard has been modified; --- Without reducing the technical requirements, no formal adoption of international standards; The main components of the machine --- English term control deleted 2005 edition of French and German, retaining only the English (see Chapter 3, Chapter 3 of the 2005 edition); --- Figures 1, 2 to redraw, Tables 1 and 2 have been adjusted (see Chapter 3, Section 3 of the 2005 edition); --- "Description" to "requirements", the contents vary (see Chapter 4, 2005, Chapter 4); --- Increase the test items "Z-axis movement and a) X-axis movement; b) to check the verticality between the Y-axis movement." (See Chapter 5 G4); G4); --- 2005 version of the G5 changes to G8 (see Chapter 5, Chapter 5, 2005); --- Remove the 2005 edition of the G6 (see Chapter 5, 2005); --- 2005 edition of the G7 and G8 and G9, respectively change G10 (see Chapter 5, Chapter 5, 2005); --- "Wire storage tube axis radial runout inspection" with "wire storage tube axial movement within the whole beating a) a horizontal plane;. B) a vertical plane" --- Project "positive Octahedron workpiece size deviation and surface roughness inspection a) the size of the deviation on a longitudinal section; b) a cross-section The size of the deviation; c) surface roughness. "To" positive Octahedron workpiece dimensional accuracy and surface roughness inspection a) longitudinal and transverse Section nominal size limit deviation; b) longitudinal and cross-sectional size of the difference; c) surface roughness. "Technical requirements have been modified (see para. --- Project "Positive octagonal table and workpiece size bias large end taper deviation checking a) the size of the big end of deviation;. B) taper deviation" more To "positive octagonal table workpiece size difference and the large end taper deviation checking a) the difference between the size of the large end; b) taper deviation." Technical requirements do --- Remove the Appendices A and B (see the 2005 edition of Appendix A and Appendix B). The standard proposed by China Machinery Industry Federation. The standard machine tools by the National Standardization Technical Committee (SAC/TC161) centralized. This standard was drafted. Suzhou EDM Machine Tool Research Institute Co., Ltd., Suzhou Sanko Technology Co., Ltd. The main drafters of this standard. Ye Jun, Yu Zhi three Qiuyu Xiu, Wang Ying, Xu, Lu Dawei, high Ye. This standard replaces the standards previously issued as follows. --- GB/T 7926-1987, GB/T 7926-2005. CNC wire EDM wire cutting back and forth go Machine accuracy test1 ScopeThis standard specifies a numerical control cutting reciprocating forming geometric precision wire walking WEDM inspection, CNC axis positioning accuracy And repeat positioning accuracy testing and inspection process, but also provides the above-mentioned test corresponds to the value of tolerance. This standard also specifies the name of the main components of the machine, and with reference to GB/T 19660-2005 named axis. This standard applies to a reciprocating cutting shaping CNC wire walking WEDM, including cross-table and single column machines Double column machines (hereinafter referred to as. the machine).2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 1958-2004 Geometrical Product Specifications (GPS) shape and position tolerance testing requirements GB/T 17421.1-1998 Test code for machine tools - Part 1. under no-load or finishing conditions Geometric accuracy of machines GB/T 17421.2-2000 Test code for machine tools - Part 2. CNC axis positioning accuracy and repeatability of determination Name 3 major components and machine axes 3.1 Cross table Single column machines Figure 1 and Table 1. figure 1 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7926-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 7926-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 7926-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7926-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 7926-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7926-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
