GB/T 786.3-2021 English PDF

US$264.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 786.3-2021: Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3: Symbol modules and connected symbols in circuit diagrams
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 786.3-2021	264	Add to Cart	3 days	Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3: Symbol modules and connected symbols in circuit diagrams	Valid

Similar standards

GB/T 2351   GB/T 2350   GB/T 3766   GB/T 2878.1   GB/T 9065.2   GB/T 786.1   

Basic data

Standard ID: GB/T 786.3-2021 (GB/T786.3-2021)
Description (Translated English): Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3: Symbol modules and connected symbols in circuit diagrams
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J20
Word Count Estimation: 14,184
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 786.3-2021: Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3: Symbol modules and connected symbols in circuit diagrams

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fluid power systems and components-Graphical symbols and circuit diagrams-Part 3.Symbol modules and connected symbols in circuit diagrams ICS 23.100.01 CCSJ20 National Standards of People's Republic of China Graphical symbols and circuit diagrams of fluid transmission systems and components Part 3.Symbolic modules and Connection symbol (ISO 1219-3.2016, IDT) Released on 2021-05-21 2021-12-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Rules for creating symbolic modules 2 4.1 Outer frame line width 2 4.2 Frame size 3 4.3 The distance between the outer frame and the line 3 4.4 Symbol module direction 3 4.5 Representation of closed pipeline 3 5 Application rules of symbol modules in loop diagram 3 5.1 Typical Layout of Symbol Module 3 5.2 Connection of Symbol Module 4 5.3 Spacing of symbol modules 4 5.4 Frame 4 of the connected symbol module 5.5 Decomposition of Symbolic Module 4 5.6 Expansion of Symbol Module 4 5.7 Positioning and alignment of connected symbol modules 5 5.8 The name of the connection point of the symbolic module interface 5 6 Example of a circuit diagram with symbolic blocks 5 7 Marking description 5 Appendix A (informative) Example of a pneumatic circuit diagram for a valve with an external connection point on the top 6 Appendix B (informative) Hydraulic circuit diagram example 8 Appendix C (informative) Pneumatic circuit diagram example 9 Appendix D (informative) Example of pneumatic circuit diagram 10 Reference 11

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is the third part of GB/T 786 "Fluid Transmission Systems and Components Graphic Symbols and Circuit Diagrams". GB/T 786 has been issued The following parts are distributed. ---Part 1.Graphical symbols; ---Part 2.Circuit diagram; ---Part 3.Symbol modules and connection symbols in the circuit diagram. This document is equivalent to ISO 1219-3.2016 ``Graphic symbols and circuit diagrams of fluid transmission systems and components-Part 3.Circuit diagrams Symbol modules and connection symbols in ". The following editorial changes have been made to this document. ---Appendix A~Appendix D are rearranged in the order mentioned in the standard text. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3). Drafting organizations of this document. Xuzhou Xugong Hydraulic Parts Co., Ltd., Xiamen Yinhua Machinery Co., Ltd., Hefei Handebel Attachment Technology Co., Ltd. Company, Zhejiang Haihong Hydraulic Technology Co., Ltd., Foshan Shenghua Auto Parts Manufacturing Co., Ltd., Guangdong Yanfei Technology Co., Ltd., Guangdong Hengxinya Technology Co., Ltd., Fujian Shengda Machinery Co., Ltd., Beijing Machinery Industry Automation Research Institute Co., Ltd. The main drafters of this document. Zhang Qiang, Su Yongding, Liu Qingjiao, He Xianjian, Bao Xunquan, Wang Jun, Wang Li, Hu Xiaojun, Yang Lingling, Long Xinhua, Zhang Xiaodong, Cao Qiaohui.

Introduction

In a fluid transmission system, power is transmitted and controlled through a pressurized fluid (liquid or gas) in a closed circuit. Through normative expressions The circuit diagram is helpful to understand the design and description of functional modules, and can avoid confusion and confusion during planning, manufacturing, installation and maintenance. error. GB/T 786 has unified specifications and requirements for the graphic symbols and circuit diagrams of fluid transmission systems and components from the technical level. Part of the composition. ---Part 1.Graphical symbols. The purpose is to determine the basic elements of various symbols and fluid transmission components and symbols in the circuit diagram. Design rules. ---Part 2.Circuit diagram. The purpose is to determine the rules for drawing hydraulic and pneumatic circuit diagrams. ---Part 3.Symbol modules and connection symbols in the circuit diagram. The purpose is to determine the creation and creation of connectable component symbols in the circuit diagram. The rules for combination and the rules for the creation and combination of symbols corresponding to the modules that constitute the function unit. Unless other rules are defined in this document, all rules are in accordance with GB/T 786.1.The symbols and arrangement of connectable components in this document The column relationship has been slightly modified based on the provisions of GB/T 786.2. Graphical symbols and circuit diagrams of fluid transmission systems and components Part 3.Symbolic modules and Connection symbol

1 Scope

This document supplements GB/T 786.1 and GB/T 786.2, and specifies the creation and combination of connectable component symbols in circuit diagrams The rules to reduce the design workload and the number of pipelines in the circuit diagram. This document specifies the rules for the creation and combination of symbols corresponding to the modules that constitute functional units, such as oil circuit block assemblies or superimposed valves Valve group or gas source processing device (FRL device). The rules of this document are not only conducive to the design of circuit diagrams, but also conducive to understanding the use of symbolic models. The block represents the circuit diagram of the combined component. This document contains examples of the application of the corresponding rules. Note. Typical application examples that comply with the rules of this document are given in the appendix. Table 1 summarizes the typical application of the rules of this document in each appendix example.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. ISO 1219-1 Graphical symbols and circuit diagrams of fluid power systems and components-Part 1.For general use and data processing applications Graphical symbols used (Fluidpowersystemsandcomponents-Graphicalsymbolsandcircuitdiagrams- Part 1.Graphicalsymbolsforconventionaluseanddata-processingapplications) Note. GB/T 786.1-2021 Graphical symbols and circuit diagrams of fluid power transmission systems and components Part 1.Graphical symbols (ISO 1219-1.2012, IDT) ISO 1219-2 Graphical symbols and circuit diagrams of fluid power systems and components-Part 2.Circuit diagrams (Fluidpowersystems andcomponents-Graphicalsymbolsandcircuitdiagrams-Part 2.Circuitdiagrams) Note. GB/T 786.2-2018 Graphical symbols and circuit diagrams of fluid transmission systems and components Part 2.Circuit diagrams (ISO 1219-2.2012, MOD) ISO 5598 Fluidpower systems and components-Vocabulary (Fluidpowersystemsandcomponents-Vocabulary) Note. GB/T 17446-2012 Fluid Power System and Components Vocabulary (ISO 5598.2008, IDT)

3 Terms and definitions

The following terms and definitions defined in ISO 5598 apply to this document. 3.1 Symbolmodules Comply with the modules (such as backplane modules) constituted by the symbols, lines, frames and connection points specified by ISO 1219-1 (the symbol modules can be The same interfaces are connected to each other, see Figure 1). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 786.3-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 786.3-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 786.3-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 786.3-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.