GB/T 7679.4-2025 English PDFUS$1339.00 ยท In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 7679.4-2025: Mining machinery terminology - Part 4: Mine hauling equipment Status: Valid GB/T 7679.4: Historical versions
Basic dataStandard ID: GB/T 7679.4-2025 (GB/T7679.4-2025)Description (Translated English): Mining machinery terminology - Part 4: Mine hauling equipment Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: D90 Classification of International Standard: 73.100.01 Word Count Estimation: 66,670 Date of Issue: 2025-05-30 Date of Implementation: 2025-12-01 Older Standard (superseded by this standard): GB/T 7679.4-2005 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 7679.4-2025: Mining machinery terminology - Part 4: Mine hauling equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 73.100.01 CCSD90 National Standard of the People's Republic of China Replaces GB/T 7679.4-2005 Mining Machinery Terminology Part 4.Mining transport equipment Released on 2025-05-30 2025-12-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of contentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 3.1 Underground narrow-gauge transport vehicles 1 3.1.1 Basic terminology 1 3.1.2 Structural terms 2 3.1.3 Shuttle car 3 3.1.4 Bucket transfer truck 8 3.1.5 Fixed box mine car 13 3.1.6 Dump truck 13 3.1.7 Side-dumping mine car 14 3.1.8 Bottom-dumping mine car 15 3.1.9 Bottom side dumping mine car 15 3.1.10 Inclined shaft man-car 16 3.1.11 Lane Traffic 18 3.1.12 Material Cart 18 3.1.13 Flatbed truck 19 3.1.14 Special Purpose Vehicles19 3.1.15 Concrete mixer tank truck 19 3.1.16 Auxiliary equipment 20 3.2 Underground trackless transport vehicles 27 3.2.1 Basic terminology 27 3.2.2 Ore transporter 28 3.2.3 Auxiliary vehicles 31 3.3 Trackless ground transport vehicles 33 3.4 Suspension equipment 34 3.4.1 Monorail crane 34 3.4.2 Aerial ropeway38 3.4.3 Underground hanging transport equipment 46 Index 48ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is part 4 of GB/T 7679 "Mining Machinery Terminology". GB/T 7679 has published the following parts. --- Part 1.Mining equipment; --- Part 2.Loading equipment; --- Part 3.Lifting equipment; --- Part 4.Mining transport equipment; --- Part 5.Crushing and grinding equipment; --- Part 6.Mining screening equipment; --- Part 7.Washing equipment; --- Part 8.Roasting equipment. This document replaces GB/T 7679.4-2005 "Mining machinery terminology Part 4.Mining transport equipment" and GB/T 7679.4- Compared with.2005, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) Added the terms and definitions of concrete mixing tank truck (see 3.1.15); b) Added brake system (see 3.2.2.2.1), service brake system (see 3.2.2.2.2), auxiliary brake system (see 3.2.2.2.3), parking brake system (see 3.2.2.2.4), Vehicle braking system (see 3.2.2.2.4), curb weight of the ore transport vehicle (see 3.2.2.2.5), drive axle (see 3.2.2.2.6), carriage lifting time (see 3.2.2.3.5), carriage lowering time (see 3.2.2.3.6), maximum traction (see 3.2.2.3.7), rated load (see 3.2.2.3.8), loading height (see 3.2.2.3.9), maximum height (see 3.2.2.3.10), underground material transport vehicle (see 3.2.3.1.2), underground Oil tanker (see 3.2.3.1.3), underground maintenance vehicle (see 3.2.3.1.4), underground lifting platform vehicle (see 3.2.3.1.5), underground crane vehicle (see 3.2.3.1.6), terms and definitions of boom lifts (see 3.2.3.2.6); c) Added trackless ore transport vehicles for open-pit mines (see 3.3.1), minimum turning diameter (see 3.3.2), emergency steering system (see 3.3.3), Terms and definitions of emergency brake system (see 3.3.4); d) Added the terms and definitions of hydraulic self-propelled equipment transporter (see 3.4.1.7) and frame-type pneumatic crane (see 3.4.1.8); e) Added rope grips (see 3.4.2.3.29), movable rope grips (see 3.4.2.3.31), and removable rope grips (see 3.4.2.3.32) Terms and definitions; f) Added mobile freight ropeway (see 3.4.3.1.1), initial tension (see 3.4.3.1.2), maximum working tension of wire rope (see 3.4.3.1.3), 4.3.1.3), load-bearing rope (see 3.4.3.2.1), traction rope (see 3.4.3.2.2), return rope (see 3.4.3.2.3), lifting rope (see 3.4. 3.2.4), stable cable (see 3.4.3.2.5), and smart sports car (see 3.4.3.2.6). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Mining Machinery (SAC/TC88). This document was drafted by. Luoyang Mining Machinery Engineering Design and Research Institute Co., Ltd., Shanxi Xinfusheng Machinery Manufacturing Co., Ltd., Copper Lingmaohong Mechanical and Electrical Equipment Co., Ltd., Shanxi Xinfusheng Technology Co., Ltd., Qixia Dali Mining Machinery Co., Ltd., CITIC Heavy Industries Machinery Machinery Co., Ltd., Luoyang Zhengfangyuan Heavy Mining Machinery Inspection Technology Co., Ltd., Jiangxi Xintong Machinery Manufacturing Co., Ltd., and Pingxiang University. The main drafters of this document are. Hu Xilei, Cheng Bo, Wei Shanshan, Zhu Aiguo, Song Dechang, Zhang Zhaokun, Tao Wenjia, Song Zhenqiang, Li Xiaoxiang and He Ping. The previous versions of this document and the documents it replaces are as follows. ---First published as GB/T 7679.4-1987 in 1987 and first revised in.2005; ---This is the second revision.IntroductionTerminology is a collection of names used to represent concepts in a specific discipline. It is one of the basic elements of standards and is an important part of scientific research, teaching, and technology. GB/T 7679 "Mining Machinery Terminology" is based on the current situation of my country's mining machinery industry. A complete set of mining machinery industry terminology standards compiled based on international standards and foreign advanced standards. It is one of the important basic industries that provides equipment for the mining and processing of materials, materials and fuels. It covers a wide range of areas and has a wide range of products. The varieties are divided into the following parts. --- Part 1.Mining equipment. The purpose is to define the terms and definitions of mining machinery and mining equipment. --- Part 2.Loading equipment. The purpose is to define the terms and definitions of mining machinery loading equipment. --- Part 3.Hoisting equipment. The purpose is to define the terms and definitions of mining machinery and mining hoisting equipment. --- Part 4.Mining transport equipment. The purpose is to define the terms and definitions of mining machinery and mining transport equipment. --- Part 5.Crushing and grinding equipment. The purpose is to define the terms and definitions of mining machinery crushing and grinding equipment. --- Part 6.Mining screening equipment. The purpose is to define the terms and definitions of mining machinery and mining screening equipment. --- Part 7.Washing equipment. The purpose is to define the terms and definitions of mining mechanical washing equipment. --- Part 8.Roasting equipment. The purpose is to define the terms and definitions of mining machinery roasting equipment. Mining Machinery Terminology Part 4.Mining transport equipment1 ScopeThis document defines terms and definitions for mining haulage equipment. This document is applicable to the design, scientific research, manufacturing, use, teaching, management, publishing, academic exchanges and international trade of mining transportation equipment. field.2 Normative referencesThis document has no normative references.3 Terms and definitions3.1 Underground narrow-gauge transport vehicles 3.1.1 Basic terminology 3.1.1.1 Car volume The geometric volume of the mine car when it is flat-packed. 3.1.1.2 Car load capacity The product of the volume of the mine car and the loose density of the ore or material it contains. 3.1.1.3 Gauge The distance between the inner edges of the rail heads of two rails on an underground narrow-gauge line. Note. There are three types of underground narrow-gauge track gauges. 600mm, 762mm and 900mm. 3.1.1.4 Wheelbase The distance between the center lines of the front and rear axles of the minecart. 3.1.1.5 hauling height Connector height height of coupler The distance from the centerline of the mine car connector to the rail surface. 3.1.1.6 Minimum turning radiusminimumturningradius < Underground narrow-gauge transport vehicle > The minimum curve radius of the two center lines of the rails through which the mine car can pass. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7679.4-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 7679.4-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 7679.4-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7679.4-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 7679.4-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7679.4-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
