GB/T 74-2018 English PDFUS$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 74-2018: Slotted set screws with cup point Status: Valid GB/T 74: Historical versions
Basic dataStandard ID: GB/T 74-2018 (GB/T74-2018)Description (Translated English): Slotted set screws with cup point Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J13 Classification of International Standard: 21.060.10 Word Count Estimation: 6,672 Date of Issue: 2018-12-28 Date of Implementation: 2019-07-01 Older Standard (superseded by this standard): GB/T 74-1985 Quoted Standard: GB/T 90.1; GB/T 90.2; GB/T 193; GB/T 1237; GB/T 2516; GB/T 3098.3; GB/T 3098.16; GB/T 3103.1; GB/T 5267.1; GB/T 5267.2; GB/T 5267.4; GB/T 5276; GB/T 5779.1; GB/T 9145; GB/T 16938 Adopted Standard: ISO 7436-1983, MOD Regulation (derived from): National Standard Announcement No. 17 of 2018 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration Summary: This standard specifies the type size, technical conditions and markings of the slotted recessed set screws. This standard is applicable to slotted recessed set screws with thread specifications of M1.6~M12 and product grade A. GB/T 74-2018: Slotted set screws with cup point---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Slotted set screws with cup point ICS 21.060.10 J13 National Standards of People's Republic of China Replace GB/T 74-1985 Slotted recessed set screw (ISO 7436.1983, MOD) Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued ForewordThis standard is one of the national standards for the “tightening screws” series. The series includes. ---GB/T 71 slotted tapered end set screws; ---GB/T 73 slotted flat end set screws; ---GB/T 74 slotted recessed set screws; ---GB/T 75 slotted long cylindrical end set screws; ---GB/T 77 hex flat end set screws; ---GB/T 78 hexagonal taper end set screws; ---GB/T 79 hexagonal cylindrical end set screws; ---GB/T 80 hex socket end set screws; ---GB/T 83 square head long cylindrical spherical end set screws; ---GB/T 84 square head concave end set screws; ---GB/T 85 square head long cylindrical end set screws; ---GB/T 86 square head short cylindrical cone end set screws; ---GB/T 821 square head flat end set screws. This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 74-1985 "grooved concave end set screws", compared with GB/T 74-1985, the main technical changes are as follows. ---The reference thread standard is unified to GB/T 193, GB/T 9145 (see Chapter 2, Table 2); --- Increase the thread size of M3.5 (see Table 1); --- Increase general technical conditions according to GB/T 16938 (see Table 2); ---The mechanical performance grade of stainless steel was modified to. A1-12H, A2-12H and A4-12H (see Table 2); --- Add non-ferrous metals CU2, CU3 (see Table 2); --- Increase the performance grade of steel and stainless steel screws "d < 1.6mm. according to the agreement" (see Table 2); --- For steel screws, remove surface oxidation treatment, increase the technical requirements of untreated and non-electrolytic zinc sheet coating according to GB/T 5267.2 (see Table 2); --- For stainless steel screws, remove the untreated, add simple processing and passivation treatment technical requirements according to GB/T 5267.4 (see Table 2); --- Add "If other technical requirements or surface treatment are required, the supply and demand agreement should be provided" (see Table 2); --- Increase the surface defects of steel screws (see Table 2). This standard uses the redrafting method to modify the use of ISO 7436.1983 "grooved concave end set screws." The technical differences between this standard and ISO 7436.1983 and their reasons are as follows. --- Remove the ISO 7436.1983 regulations "If you need other technical requirements, ISO 3506 and ISO 4759-1 are selected." (see ISO 7436.1983, Chapter 1), not subject to the provisions of this standard; --- In the normative reference documents, replace the international standards with Chinese standards (see Chapter 2), increase the reference to GB/T 90.2 (see Table 2), GB/T 3098.16 (see Table 2), GB/T 5267.2 (see Table 2), GB/T 5267.4 (see Table 2), GB/T 5779.1 (see Table 2), GB/T 16938 (see Table 2) and GB/T 1237 (see 5.1), delete the reference to ISO 888, ISO 4753, in order to comply with our country Firmware base standard; --- Increase the general technical conditions according to GB/T 16938 (see Table 2), in order to meet the development requirements of the set screws; --- Add non-ferrous metals CU2, CU3 (see Table 2) to expand the scope of use of the product; ---The performance grade of stainless steel was modified to. A1-12H (see Table 2) to meet the new material of the set screw; --- Increase the performance grade of steel and stainless steel screws "d < 1.6mm. according to the agreement" (see Table 2), to clarify the performance level of small specifications Provision --- For steel screws, remove surface oxidation treatment, increase the technical requirements of untreated and non-electrolytic zinc sheet coating according to GB/T 5267.2 (see Table 2) to meet the corrosion requirements of steel screw surfaces; --- For stainless steel screws, remove the untreated, add simple processing and passivation treatment technical requirements according to GB/T 5267.4 (see Table 2), In order to meet the corrosion protection requirements of stainless steel screws; --- In order to improve product quality, the surface defects of steel screws are increased according to the basic standards of fasteners; --- Increase packaging technical requirements (see Table 2) to meet the basic standards of fasteners in China; --- Modify the tag example as a simplified tag example (see 5.2) to comply with the provisions of GB/T 1237. This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Fastener Standardization Technical Committee (SAC/TC85). This standard is drafted by. China Machine Productivity Promotion Center. Participated in the drafting of this standard. Dongfeng Commercial Vehicle Co., Ltd. Dongfeng Commercial Vehicle Technology Center, Zhejiang Haili Co., Ltd., Shanghai Collection Excellent standard five high strength fasteners Co., Ltd. This standard is interpreted by the National Fastener Standardization Technical Committee. The previous versions of the standards replaced by this standard are. ---GB 74-1958, GB 74-1966, GB 74-1976, GB/T 74-1985. Slotted recessed set screw1 ScopeThis standard specifies the type size, technical conditions and markings of the slotted recessed set screws. This standard is applicable to slotted recessed set screws with thread specifications of M1.6~M12 and product grade A.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 90.1 fastener acceptance inspection (GB/T 90.1-2002, ISO 3269.2000, IDT) GB/T 90.2 Fastener Marking and Packaging GB/T 193 Ordinary Thread Diameter and Pitch Series (GB/T 193-2003, ISO 261.1998, MOD) GB/T 1237 fastener marking method (GB/T 1237-2000, eqvISO 8991.1986) GB/T 3098.3 Fastener mechanical properties set screws (GB/T 3098.3-2016, ISO 898-5.2012, MOD) GB/T 3098.16 fastener mechanical properties stainless steel set screws (GB/T 3098.16-2014, ISO 3506-3.2009, MOD) GB/T 3103.1 fastener tolerance bolts, screws, studs and nuts (GB/T 3103.1-2002, idtISO 4759-1.2000) GB/T 5267.1 Fastener Plating (GB/T 5267.1-2002, ISO 4042.1999, IDT) GB/T 5267.2 fastener non-electrolytic zinc sheet coating (GB/T 5267.2-2017, ISO 10683.2014, MOD) GB/T 5267.4 fastener surface treatment corrosion-resistant stainless steel passivation treatment (GB/T 5267.4-2009, ISO 16048.2003, IDT) GB/T 5276 fastener bolts, screws, studs and nuts size code and label (GB/T 5276-2015, ISO 225. 2010, MOD) GB/T 5779.1 fasteners surface defects bolts, screws and studs general requirements (GB/T 5779.1-2000, idtISO 6157-1. 1988) GB/T 9145 medium thread precision, preferred series of extreme dimensions (GB/T 9145-2003, ISO 965-2.1998, MOD) General technical requirements for GB/T 16938 fastener bolts, screws, studs and nuts (GB/T 16938-2008, ISO 8992. 2005, IDT)3 type sizeThe type and dimensions of the screws are shown in Figure 1 and Table 1. The size code and label should conform to GB/T 5276. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 74-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 74-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 74-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 74-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 74-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 74-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |