GB/T 6730.88-2024 English PDF

US$539.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6730.88-2024: Iron ores - Determination of chlorine content - X-ray fluorescence spectrometric method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6730.88-2024	539	Add to Cart	5 days	Iron ores - Determination of chlorine content - X-ray fluorescence spectrometric method	Valid

Similar standards

GB/T 6730.84   GB/T 6730.87   GB/T 6730.83   GB/T 6730.90   GB/T 6730.89   GB/T 6730.86   

Basic data

Standard ID: GB/T 6730.88-2024 (GB/T6730.88-2024)
Description (Translated English): Iron ores - Determination of chlorine content - X-ray fluorescence spectrometric method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: D31
Classification of International Standard: 73.060.10
Word Count Estimation: 26,250
Date of Issue: 2024-06-29
Date of Implementation: 2025-01-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 6730.88-2024: Iron ores - Determination of chlorine content - X-ray fluorescence spectrometric method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 73.060.10 CCSD31 National Standards of People's Republic of China Determination of chlorine content in iron ore X-ray fluorescence spectrometry Released on 2024-06-29 2025-01-01 Implementation State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Principle 1 5 Reagents and Materials 2 6 Instruments and Equipment 2 7 Take sample 3 8 Test Step 4 9 Result calculation 7 10 Result Processing 8 11 Test Report 10 Appendix A (informative) Components of GB/T 6730 11 Appendix B (Informative) Preparation of Flux A 14 Appendix C (Informative) Preparation of Flux B 15 Appendix D (Informative) Precision Test Raw Data 16 Appendix E (Normative) Sample Analysis Result Acceptance Procedure Flowchart 18

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 88 of GB/T 6730 "Iron Ore". The published parts of GB/T 6730 are shown in Appendix A. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Iron and Steel Association. This document is under the jurisdiction of the National Iron Ore and Direct Reduced Iron Standardization Technical Committee (SAC/TC317). This document was drafted by. Qingdao Bozheng Inspection Technology Co., Ltd., Qingdao Yuancheng Zongheng Technology Co., Ltd., Qingdao Dehong Jinxin Technology Co., Ltd. Ltd., Qingdao Customs Technology Center, Hebei Product Quality Supervision and Inspection Institute, Qingdao University of Technology, Metallurgical Industry Information Standards Research Institute Research Institute. The main drafters of this document are. Ding Shibing, Ma Li, Che Lizhi, Guan Song, Zhao Jingjing, Zhang Ning, Fan Yu, Feng Lili, Song Fei, Wu Yajun, Li Fei, Zhang Qingjian, Wang Jing, and Liu Jinfeng.

Introduction

Iron ore is the main raw material for the steel industry. In the standard system of the steel industry, the standard system for determination of chemical composition of iron ore is one of the most important standards. It is a very important part of the production process and plays an important role in ensuring the quality of iron ore products. This series of methods and standards serve the production of iron ore. production, trade and application, providing technical support for the high-quality development of my country's steel industry. GB/T 6730 includes a series of standards for the determination of chemical composition of iron ore, which respectively stipulates the content of moisture, total iron, metal Iron, ferrous iron, silicon, aluminum, calcium, magnesium, sulfur, phosphorus, manganese, titanium, total rare earth, barium, chromium, vanadium, tin, copper, cobalt, nickel, zinc, niobium, bismuth, potassium, sodium, carbon, lead, arsenic, Determination methods for chemical components such as cadmium, mercury, fluorine, chlorine, loss on ignition and combined water. In 1986, GB/T 6730 first issued 51 national standards for the determination of chemical composition of iron ore. Based on the development of technology and actual production needs, after years of continuous formulation and revision, a relatively complete standard system has been formed. The parts of GB/T 6730 to be published are shown in Appendix A. Determination of chlorine content in iron ore X-ray fluorescence spectrometry Warning---People who use this document should have practical experience in formal laboratory work. This document does not address all possible safety issues. The user is responsible for taking appropriate safety and health measures and ensuring compliance with the conditions stipulated in relevant national laws and regulations.

1 Scope

This document specifies a method for the determination of chlorine in iron ores by wavelength dispersive X-ray fluorescence spectrometry. This document is applicable to the determination of chlorine content in natural iron ore, iron concentrate, sintered ore and pelletized ore. The determination range (mass fraction). 0.010%~ 1.20%.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 6379.2 Accuracy (trueness and precision) of measurement methods and results Part 2.Determination of repeatability of standard measurement methods Basic methods of sex and reproducibility GB/T 6682 Specifications and test methods for water used in analytical laboratories GB/T 6730.1 Preparation of pre-dried samples for iron ore analysis GB/T 8170 Rules for rounding off values and expression and determination of limit values GB/T 10322.1 Iron ore sampling and sample preparation methods GB/T 12806 Laboratory glassware single-line volumetric flasks GB/T 12808 Laboratory glassware single-line pipettes GB/T 16597 General rules for analysis of metallurgical products by X-ray fluorescence spectrometry GB/T 20565 Terminology of iron ore and direct reduced iron JJF1343 Determination of the value, uniformity and stability of reference materials JJG810 Wavelength Dispersive X-ray Fluorescence Spectrometer

3 Terms and definitions

The terms and definitions specified in GB/T 20565 apply to this document.

4 Principle

The sample was prepared into a borate melt sample, and the X-ray fluorescence intensity of the chlorine element was measured. The chlorine element peak position ± 0.5° was used as the background measurement. The calibration samples were prepared using high-purity reference materials, and the peak-to-background ratio of the calibration blank was calculated using the molten sample of pure Fe2O3. He melted the calibration background intensity of the calibration piece and subtracted it to obtain the net intensity of the chlorine element. The linear relationship between the concentration of the calibration sample and the net intensity was used to calculate The same method is used to obtain the net intensity of the test sample and the reagent blank sample. After deducting the net intensity of the reagent blank, the calibration coefficient is calculated. Calculate the chlorine concentration in the sample. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6730.88-2024_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6730.88-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6730.88-2024_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6730.88-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.