GB/T 6730.24-2025 English PDFUS$379.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6730.24-2025: Iron ores - Determination of total rare earth contents - Arsenazo Ⅲ spectrophotometric method Status: Valid GB/T 6730.24: Historical versions
Basic dataStandard ID: GB/T 6730.24-2025 (GB/T6730.24-2025)Description (Translated English): Iron ores - Determination of total rare earth contents - Arsenazo �� spectrophotometric method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: D31 Classification of International Standard: 73.060.10 Word Count Estimation: 18,176 Date of Issue: 2025-04-25 Date of Implementation: 2025-11-01 Older Standard (superseded by this standard): GB/T 6730.24-2006 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 6730.24-2025: Iron ores - Determination of total rare earth contents - Arsenazo III spectrophotometric method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 73.060.10 CCSD31 National Standard of the People's Republic of China Replaces GB/T 6730.24-2006 Determination of total rare earth content in iron ore Arsenazo III spectrophotometry Released on 2025-04-25 2025-11-01 Implementation State Administration for Market Regulation The National Standardization Administration issued ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 24 of GB/T 6730 "Iron Ore". The published parts of GB/T 6730 are shown in Appendix A. This document replaces GB/T 6730.24-2006 "Determination of the total amount of rare earth in iron ore - Extraction separation - Chlorophosphonazo mA spectrophotometry Compared with GB/T 6730.24-2006, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) Change the measurement range to “0.010%~1.10%” (see Chapter 1, Chapter 1 of the.2006 edition); b) The color developer has been changed from chlorophosphonazo mA to arsenazo III (see 5.23, 4.14 of the.2006 edition); c) The determination principle of the method has been changed (see Chapter 4, Chapter 3 of the.2006 edition); d) Added a chapter on “Instruments and Equipment” (see Chapter 6); e) Added “General treatment of analysis results” (see 9.2). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Iron and Steel Association. This document is under the jurisdiction of the National Iron Ore and Direct Reduced Iron Standardization Technical Committee (SAC/TC317). This document was drafted by. Baotou Rare Earth Research Institute, China Steel Group Ma'anshan Mining Research Institute Co., Ltd., China Certification and Inspection Group Hebei Group Co., Ltd., Baotou Steel Group Mining Research Institute (Limited Liability Company), Baotou Steel Surveying and Mapping Research Institute, Nuclear Industry 203 Research Institute, Inner Mongolia Baotou Steel Union Co., Ltd., Changsha Institute of Mining and Metallurgy Testing Technology Co., Ltd., and Metallurgical Industry Information Standards Research Institute. The main drafters of this document are. Wang Sumei, Ren Xudong, Xing Rongrong, Hua Shaoguang, Li Bo, Wang Gang, Shen Menglin, Li Tingting, Zhang Dongliang, Xue Zhiwei, Lin Meili, Wei Tongwei, Yang Qian, Qiao Ningqiang, Zheng Fengfeng, Zhang Xiuyan, Xia Xiangwei, Wang Yanqiu, Zhou Ting, Chen Zibin, Zhang Chen. This document was first issued in 1986, revised for the first time in.2006, and this is the second revision.IntroductionIron ore is the main raw material for the steel industry. In the standard system of the steel industry, the standard system for determination of chemical composition of iron ore is one of the most important standards. It is a very important part of the production process and plays an important role in ensuring the quality of iron ore products. This series of methods and standards serve the production of iron ore. production, trade and application, providing technical support for the high-quality development of my country's steel industry. GB/T 6730 includes a series of standards for the determination of chemical composition of iron ore, which respectively stipulates the content of moisture, total iron, metal Iron, ferrous iron, silicon, aluminum, calcium, magnesium, sulfur, phosphorus, manganese, titanium, total rare earth, barium, chromium, vanadium, tin, copper, cobalt, nickel, zinc, niobium, bismuth, potassium, sodium, carbon, lead, arsenic, Determination methods for chemical components such as cadmium, mercury, fluorine, chlorine, loss on ignition and combined water. In 1986, GB/T 6730 first issued 51 national standards for the determination of chemical composition of iron ore. In line with the development of technology and actual production needs, after years of continuous formulation and revision, a relatively complete standard system has been formed. The parts of GB/T 6730 to be published are shown in Appendix A. Determination of total rare earth content in iron ore Arsenazo III spectrophotometry Warning---People who use this document should have practical experience in formal laboratory work. This document does not address all possible safety issues. The user is responsible for taking appropriate safety and health measures and ensuring compliance with the conditions stipulated in relevant national laws and regulations.1 ScopeThis document specifies the arsenazo III spectrophotometric method for the determination of the total amount of rare earth elements in iron ore. This document is applicable to the determination of the total amount of rare earth in iron ore, iron concentrate, lump ore, sintered ore and pelletized ore. Determination range (mass fraction). 0.010%~1.10%.2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 6379.1 Accuracy (trueness and precision) of measurement methods and results Part 1.General principles and definitions GB/T 6379.2 Accuracy (trueness and precision) of measurement methods and results Part 2.Determination of repeatability of standard measurement methods Basic methods of sex and reproducibility GB/T 6682 Specifications and test methods for water used in analytical laboratories GB/T 6730.1 Preparation of pre-dried samples for iron ore analysis GB/T 7729 General rules for spectrophotometric chemical analysis of metallurgical products GB/T 8170 Rules for rounding off values and expression and determination of limit values GB/T 10322.1 Iron ore sampling and sample preparation methods GB/T 12806 Laboratory glassware single-line volumetric flasks GB/T 12807 Laboratory glassware graduated pipettes GB/T 12808 Laboratory glassware single-line pipettes3 Terms and definitionsThere are no terms or definitions that require definition in this document.4 PrincipleThe sample was melted with sodium hydroxide and sodium peroxide, leached with triethanolamine, and chelated with disodium ethylenediaminetetraacetic acid (EDTA) to eliminate lead, Interfering elements such as calcium, strontium, barium, aluminum and iron are precipitated and filtered, acidified with hydrochloric acid, and then separated with hydrofluoric acid from titanium, iron, zirconium, niobium, tantalum, nickel, copper, etc. At pH 2.8, arsenazo III and rare earth generate colored complexes, and their absorbance is measured at a wavelength of 654 nm to determine the total amount of rare earth. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6730.24-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 6730.24-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 6730.24-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6730.24-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 6730.24-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6730.24-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
