GB/T 6498-2024 English PDFUS$239.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6498-2024: Test method for micronaire value of cotton fibers Status: Valid GB/T 6498: Historical versions
Basic dataStandard ID: GB/T 6498-2024 (GB/T6498-2024)Description (Translated English): Test method for micronaire value of cotton fibers Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: W10 Classification of International Standard: 59.060.10 Word Count Estimation: 11,129 Date of Issue: 2024-03-15 Date of Implementation: 2024-10-01 Older Standard (superseded by this standard): GB/T 6498-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 6498-2024: Test method for micronaire value of cotton fibers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 59.060.10 CCS W10 National Standards of People's Republic of China Replaces GB/T 6498-2008 Test method for micronaire value of cotton fibers value,MOD) Released on 2024-03-15 2024-10-01 Implementation State Administration for Market Regulation The National Standardization Administration issued ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 6498-2008 "Test method for micronaire value of cotton fibers". In addition to the integration and editorial changes, the main technical changes are as follows. --- Changed the terms and definitions of micronaire (see 3.1, 3.1 of the.2008 edition); --- Added airflow instrument requirements (see 5.2); --- The sample preparation method has been changed (see 7.2, 7.2 of the.2008 edition); --- Added test report description of sample preparation method, test date, details of any deviation from this document and any abnormalities observed The content of the situation (see Chapter 10). This document is modified to adopt ISO 2403.2021 "Textiles - Determination of the Micronaire value of cotton fibres". This document has the following structural adjustments compared to ISO 2403.2021. ---Added 6.3; --- Chapter 8 8.1.1 is changed to item a), 8.1.2 is changed to item b); --- Appendix B corresponds to Appendix C in ISO 2403.2021, and Appendix C corresponds to Appendix B in ISO 2403.2021. The technical differences between this document and ISO 2403.2021 and their reasons are as follows. --- ISO 139 (see 6.2) is replaced by the normative reference GB/T 6529 to adapt to my country's technical conditions and improve operability; --- Added cotton fiber micronaire value test at room temperature (see 6.3) to meet the needs of on-site inspection; --- ISO 1130 (see 7.1) has been replaced by the normative reference GB/T 6097 to adapt to my country's technical conditions and improve operability. The following editorial changes were made to this document. --- The name of the standard is changed to "Test method for micronaire value of cotton fibers"; --- Changed Table B.1 in Appendix B; --- Changed Table C.1 in Appendix C; --- Replaced ISO 5725-5.1998 and GB/T 6379.2-2004 and GB/T 6379.6-2009 with informative references ISO 13528.2015 (see C.3). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Fiber Standardization Technical Committee (SAC/TC513). This document was drafted by. China Fiber Quality Monitoring Center, Donghua University, Shandong Zhongkang Guochuang Advanced Printing and Dyeing Technology Research Institute Co., Ltd., Bortala Mongol Autonomous Prefecture Fiber Inspection Institute, Bayinguoleng Mongol Autonomous Prefecture Inspection and Testing Center, Aksu Prefecture Inspection and Testing Center Fiber Inspection Inspection Institute, Shihezi Fiber Inspection Institute, Changji Prefecture Fiber Inspection Institute, Shandong Province Fiber Quality Monitoring Center, Aksu Regional Inspection and Testing Center, Yancheng Fiber Inspection Institute. The main drafters of this document are. Zhang Baoguo, Li Weidong, Hou Chuan, Chen Ruyi, Liu Yongjie, Nur Aili Adili, Wang Huiping, Ren Meng, Ma Li, Cao Yang, Bian Yongdong, Li Wei, Lu Weidong, Fan Pengfei, Xu Hong, Liu Xiaomin, Yang Jun, and Liu Fuyang. The previous versions of this document and the documents it replaces are as follows. ---First published in.1992 as GB/T 6498-1992, first revised in.2004, second revised in.2008; ---This is the third revision.IntroductionThe micronaire value is one of the most important cotton fiber quality parameters. It is obtained by measuring cotton fiber plugs and represents the average value of the measured fiber plugs. Since the sample preparation is simple, the measurement can be completed in a short time, so the test results can be obtained quickly. According to the air permeability of compressed cotton fiber samples, early manual micronaires used mechanical air flow meters with float sensors to indicate the flow rate. The air flow through the sample, the mechanical pressure gauge shows the pressure difference across the sample. Modern micronaire testers usually use electronic sensors Measures air flow and air pressure differential. In all cases, the dimensionless micronaire value is calculated from the air flow rate and the pressure difference through the sample. The range is from 2 to 8, where 2 indicates low air permeability (the sample has a high compression density and is composed of very fine and/or immature fibers) and 8 indicates high Air permeability (sample has low compression density and consists of very coarse and/or mature fibers). Test method for micronaire value of cotton fibers1 ScopeThis document describes a method for determining the micronaire value of loose, irregularly arranged quantities of cotton fibres. This document applies to the determination of the micronaire value of cotton fibres taken from bales, laps, slivers or other sources of lint.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 6097 Sampling method for cotton fiber testing GB/T 6529 Standard atmospheres for conditioning and testing textiles (GB/T 6529-2008, ISO 139.2005, MOD)3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Micronaire value A measure of the air permeability of a quantity of cotton fiber under specified conditions. Note 1.The micronaire scale is based on a range of cottons that have been assigned micronaire values by international agreement. Note 2.The micronaire value is an agreed scale.4 PrincipleThe air flow passes through the fiber plug composed of the test sample, and the flow rate through the fiber plug or the pressure difference at both ends of the fiber plug is recorded, thereby The mass and volume of the sample can be kept constant for a certain type of instrument, or they can be changed appropriately according to their relationship. The scale indicating the change in air permeability can be calibrated with micronaire values or expressed in appropriate units of flow rate or pressure difference and expressed in predetermined units. Use a table or curve to convert the observed readings into micronaire values.5 Equipment and Materials5.1 Balance, with a graduation value of 0.01 g. The range is sufficient to weigh the sample required by the air flow meter, with an accuracy of ± 0.2% of the sample mass. 5.2 Airflow meter. Its main components are. 5.2.1 Compression specimen cylinder with mesh plate. Its size should meet the requirements, that is, it can hold the test specimen of specified mass and after compression, the test specimen The sample density is 0.16g/cm3~0.30g/cm3. 5.2.2 The device for measuring the air permeability of the sample shall include. a) A suitable air pump. b) One or more valves or other devices used to control the air flow rate or pressure difference through the test specimen in the compression cylinder. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6498-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 6498-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 6498-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6498-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 6498-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6498-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
